Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 12 of 89 FirstFirst ... 210111213142262 ... LastLast
Results 111 to 120 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #111

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    It didn't like the MCH Core up a notch / VCore down a notch at all, it BSOD'ed with 00124 after about an hour according to the Prime log.

    Yes, they replaced the RAM the day after, new one has been fine.
    Last edited by D-an-W; 05-22-2009 at 01:19 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  2. #112
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    You could try a notch up in Vcore from the 24 hour fail, or the same Vcore and a notch up in MCH.

    After that try the same Vcore and MCH with more PLL, then more VTT maybe. Be systematic, change one thing at a time. If the thing you changed improved time before failiure, raise it again. If raising makes it worse, lower back and try something else. If raising it again helped, then raise it some more.
    Last edited by Psycho101; 05-22-2009 at 03:18 AM.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  3. #113
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    My prime 95 "blend" test with IBT's also thrown in every once in a while BSOD'd @ around 19 or so hours... I have no patience for a 19 hour test failure!! lol

    I was testing a FSB @ 495. I thought I was stable to 515.. but I didn't need to go that high so I back it off and wanted to verify long term stability. bzzzzzzzzzzzzt nutz!

    I am upping my MCH Core to 1.260... where are you at now D-and-W?
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  4. #114

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I am currently confused as hell with bloody straps B's and D's

    The MCH Core is at 1.220V after moving it up one notch...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.10GHz( 456x9)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [456]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 912
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 5]
    x tRCD ...........................5...: [ 4]
    x tRP.............................5...: [ 4]
    x tRAS...........................18...: [12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: [ 4]
    x tWTR............................3...: [ 4]
    x tWR.............................6...: [ 8]
    x tRFC...........................52...: [68]
    x tRTP............................3...: [ 4]
    x Command Rate (CMD) .............0...: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.31875V]
    CPU Termination........1.200V.........: [1.280V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [0.835V]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.220V]
    MCH Reference..........0.760V.........: [0.778V]
    MCH/DRAM Reference.....0.900V.........: [0.910V]
    ICH I/O................1.500V.........: [1.590V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.080V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Last edited by D-an-W; 05-22-2009 at 04:21 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  5. #115
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I have had no luck at all with 2.00B strap. I have had a pretty easy time with 2.00D. I tried for a tRD of 7... bzzzzt. I am now trying for a tRD of 8 @ 450 FSB... and having no luck so far.. My board seems to really like MCH Core being around 1.26.

    edit...

    Don't think I can get tRD of 8 either (Keep locking up on Memtest86+ Test #3).. Guess I will be happy with tRD of 9.
    Last edited by devoh; 05-22-2009 at 05:14 AM.
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  6. #116
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    My experience with my E6550 is that up to about 470MHz, the 2.00B strap allows Static tRead Value to be set 1 step lower than the setting required when using the 2.00D strap. At higher cpu clock settings, the 2.00D setting runs fine with Static tRead 1 setting lower (tighter) than the 2.00B strap. I've used both straps up to 520MHz speeds, but both straps are not stable at speeds higher than 494MHz.

    Memory bandwidth tests show an improvement of 200+ MHz using the tighter Static tRead setting. I can use identical bios settings with either of these straps when I adjust the Static tRead Value to the lowest possible setting.

    Some have reported having a more difficult time when using the 2.00B multiplier and they had an easier time using the 2.00D setup.

    Maybe it's a C2D vs Quad thing.

    ** edit **
    At 459MHz and 2.40B (1102MHz memory), my system is stable using tRD = 8.
    This means that tRD = 9 is probably required on your system using mid 400MHz speeds with the 2.00D strap.
    tRD = 9 is usable up to about 510MHz on my system.
    Last edited by profJim; 05-22-2009 at 01:47 PM.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #117

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Cheers PJ, I will try and get my head round that tonight.

    It didn't like PLL up one notch or CPU Vcore up a notch. Maybe my 24hr Prime was a fluke (Is that even possible?)?
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  8. #118
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by profJim View Post
    My experience with my E6550 is that up to about 470MHz, the 2.00B strap allows Static tRead Value to be set 1 step lower than the setting required when using the 2.00D strap. At higher cpu clock settings, the 2.00D setting runs fine with Static tRead 1 setting lower (tighter) than the 2.00B strap. I've used both straps up to 520MHz speeds, but both straps are not stable at speeds higher than 494MHz.

    Memory bandwidth tests show an improvement of 200+ MHz using the tighter Static tRead setting. I can use identical bios settings with either of these straps when I adjust the Static tRead Value to the lowest possible setting.

    Some have reported having a more difficult time when using the 2.00B multiplier and they had an easier time using the 2.00D setup.

    Maybe it's a C2D vs Quad thing.

    ** edit **
    At 459MHz and 2.40B (1102MHz memory), my system is stable using tRD = 8.
    This means that tRD = 9 is probably required on your system using mid 400MHz speeds with the 2.00D strap.
    tRD = 9 is usable up to about 510MHz on my system.

    Maybe I need to try and go near stock and try a 2.00B strap.. then if I get it slowly move up and see what happens. I really would like to get a 8 tRD.. profJim are you saying that you can go tRD 8 on "B" until like 470 FSB.. then you have to switch over to "D" strap to go above 470 FSB with a 8 tRD?

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  9. #119
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    **EDIT**

    It may be best to ignore my idea...

    I will not delete it.. so others can comment on how bad of an idea it is..



    D-and-W,
    one of the gang eluded to a GA-EP45-UD3P review with E8400... The guy was using memory that neither one of us could ever afford.. but I noticed something in his review.. he was hitting 4.5Ghz and higher.. it was how he was doing it that facinated me..
    I know the guys here don't like auto settings, and for good reason.. but it will give you a quick idea of what the machine thinks will work with what you are asking of it. Then you can tweak from there. I was able to use 2.00B straps to 430 FSB.. then went 2.00D to 450FSB. I think I have the golden 4-4-4-12 tRD of 8 and FSB of 450.. Here is how I found it..

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.1) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast]
    CPU Clock Ratio ......................: [7X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 3.150GHz( 450x7)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [450]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 900
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 4]
    x tRCD ...........................5...: [ 4]
    x tRP.............................5...: [ 4]
    x tRAS...........................18...: [12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: [AUTO]
    x tWTR............................3...: [AUTO]
    x tWR.............................6...: [AUTO]
    x tRFC...........................52...: [AUTO]
    x tRTP............................3...: [AUTO]
    x Command Rate (CMD) .............0...: [AUTO]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 8]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 8]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [AUTO]
    CPU Termination........1.200V.........: [AUTO]
    CPU PLL................1.500V.........: [AUTO]
    CPU Reference..........0.760V.........: [AUTO]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [AUTO]
    MCH Reference..........0.760V.........: [AUTO]
    MCH/DRAM Reference.....0.900V.........: [AUTO]
    ICH I/O................1.500V.........: [AUTO]
    ICH Core...............1.100V.........: [AUTO]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.000V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    You might try this to find it, write down the value and get out quick. Then tweak from there.

    EDIT..

    Here is the link to that article. Kick found it http://forum.lowyat.net/topic/861127

    -devoh
    Last edited by devoh; 05-23-2009 at 02:07 AM.
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  10. #120
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    are you saying that you can go tRD 8 on "B" until like 470 FSB.. then you have to switch over to "D" strap to go above 470 FSB with a 8 tRD?
    No, I said:
    I've used both straps up to 520MHz speeds, but both straps are not stable at speeds higher than 494MHz.
    I've had no trouble at all using the 2.00B strap, others have said that getting the B-strap stable can be harder than using the D-strap when the cpu clock speed is above 400MHz.

    Here's a brief summary with my system with cpu speeds above 400MHz:

    1) up to about 470MHz, the tRD setting for the B-strap can be 1 step lower (tighter) than the D-strap at the same cpu speeds.

    2) higher than 470MHz, the D-strap's tRD setting can be 1 step lower than the B-strap at the same cpu speeds.

    3) my system would boot into windows and run all benchmarks up to 528MHz speeds, but always failed stability stress tests above 494MHz, using regardless of which strap was used.

    4) above 510MHz, the tRD setting had to be increased, regardless of which strap was used.

    My system's stability issues are probably due to my E6550 cpu, as the mobo is easily capable of mid to upper 500MHz clock speeds.

    Anyone care to loan me a cpu that's capable of running at 600MHz?
    I'd love to run my DDR2 memory 1:1 at 1200MHz.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 12 of 89 FirstFirst ... 210111213142262 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •