Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 18 of 89 FirstFirst ... 816171819202868 ... LastLast
Results 171 to 180 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #171

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Prime Large FFT has now been running for 13hrs without issue, going to leave this going till I get home...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  2. #172
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    My Thermalright extreme 120 will arrive on tuesday. I will then be starting over with my attempts. D-and-W I look forward to seeing what you come up with.

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  3. #173

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Running the final Prime Blend test now before moving on, passed so far...24hrs Prime Large, 9hrs OCCT, 1hr OCCT Linpack, 9hrs Prime Small and so far 7hrs Prime blend.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  4. #174
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    WOOHOOOO!!! D-and-W what's your settings?

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  5. #175

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    The latest template under test is here after the previous one proved stable...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.5
    CPU Frequency ........................: 4.08GHz( 480x8.5)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 480]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................18...: [  15]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.28125V] (One up from default)
    CPU Termination........1.200V.........: [1.220V] (One up from default - Only voltage change for this Test)
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.100V]
    MCH Reference..........0.760V.........: [0.740V] (One down from default)
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.100V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V] (One up from default - DDR18V = 2.016V in PC Health Status)
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  6. #176

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    The last template proved about as stable as a three legged chair so have been playing and here is what I came up with that passes a 20 IBT trial (More tests underway)...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.5
    CPU Frequency ........................: 4.08GHz( 480x8.5)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 480]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................18...: [  15]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.29375V] (Three steps up from default)
    CPU Termination........1.200V.........: [1.280V] (Four steps up from default)
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.100V]
    MCH Reference..........0.760V.........: [0.730V] (0.680V @ 1.200V VTT - Four steps down from default)
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.100V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V] (One up from default - DDR18V = 2.016V in PC Health Status)
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Last edited by D-an-W; 06-01-2009 at 01:56 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  7. #177
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    That's much much less MCH Ref than before, however if it passes IBT x 20 then it may well be a good change. It's givin me an idea about my E7400. I'll try a variation on what you just posted.

    Good job on the progress updates, this is a useful resource.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  8. #178

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Cheers Psycho101, it passed 20x trial of IBt but locked up with a blank screen when running OCCT Linpack so I upped the CPU Core to 1.30000V which it has just passed 20x IBT and OCCT Linpack.

    I tried to keep the MCH Ref as close to 0.740V as possible as it passed 470FSB with that, I don't really know if thats the right thing to do, but it is working so far!
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  9. #179

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Finally managed to get 480FSB somewhat stable with the following settings, been through several 20x IBT's, a couple of 1hr OCCT Linpacks and a 9hr OCCT. Starting on Prime tests now...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
     
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.5
    CPU Frequency ........................: 4.08GHz( 480x8.5)
     
    ********** Clock Chip Control ********
     
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 480]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
     
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
     
    ******** DRAM Performance Control ********
     
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
     
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................18...: [  15]
     
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
     
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
     
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
     
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
     
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
     
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
     
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
     
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
     
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
     
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
     
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
     
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
     
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
     
    ****** Motherboard Voltage Control ******
     
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.30000V] (Four up from default)
    CPU Termination........1.200V.........: [1.200V]
    CPU PLL................1.500V.........: [1.570V] (One up from default)
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]  (Three up from default)
    MCH Reference..........0.760V.........: [0.740V] (One down from default)
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.200V] (One up from default)
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V] (One up from default - DDR18V = 2.016V in PC Health Status)
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
     
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
     
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Ambient temps are up about three degrees from last week too so I am not worried about the rise in max temps either...

    Last edited by D-an-W; 06-02-2009 at 05:35 PM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  10. #180
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by D-an-W View Post
    Finally managed to get 480FSB somewhat stable with the following settings, been through several 20x IBT's, a couple of 1hr OCCT Linpacks and a 9hr OCCT. Starting on Prime tests now...
    So what does somewhat stable mean? I never realized that overclocking was such a challenge. My new cooler is arriving today.

    My current temps @ 3.468Ghz are..
    IDLE 36, Prime95 Torture 58, IBT 20 loops 66.

    I read that my current cooler has it's fins pressed to the heat pipes.. not soldered like the TrUE.. man I wish I would have read more before I bought it.

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

Page 18 of 89 FirstFirst ... 816171819202868 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •