Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 41 of 89 FirstFirst ... 31394041424351 ... LastLast
Results 401 to 410 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #401

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Anyone tried the latest BIOS update yet?
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  2. #402
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by D-an-W View Post
    Anyone tried the latest BIOS update yet?

    found this in the BIOS section http://forums.tweaktown.com/f69/giga...tml#post305426


    So it sounds like it contains the new AHCI ROM code to boot faster...

    I'm tempted...

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  3. #403
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Give it a try devoh. I'm going to when I've checked the forum. Been running F9L for a bit, solid as a rock.

    On the subject of wierd boot up problems with OC settings, mine change with the PSU I use. The Zalman I was lucky enough to win caused a boot to the backup BIOS when turned off at the wall. My OCZ (both 400W and 500W SilentXStream) caused a simple double boot, and now this HX750 causes an infinate boot loop until power is discontinued again for 30 sec.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  4. #404
    KayossZero's Avatar
    KayossZero is offline Junior Member
    Join Date
    Feb 2009
    Location
    Jefferson, Maine
    Posts
    88

    Lightbulb Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by Psycho101 View Post
    Give it a try devoh. I'm going to when I've checked the forum. Been running F9L for a bit, solid as a rock.

    On the subject of wierd boot up problems with OC settings, mine change with the PSU I use. The Zalman I was lucky enough to win caused a boot to the backup BIOS when turned off at the wall. My OCZ (both 400W and 500W SilentXStream) caused a simple double boot, and now this HX750 causes an infinate boot loop until power is discontinued again for 30 sec.
    You know it's interesting you mention this. I've noticed that when I'm OCing that the only thing that scares me but never seems to do harm is if I unplug the PSU power cord/switch off the power switch on the PSU, when I go to turn the computer on it does indeed turn on and then turn off real quick and then turn on again with no bios errors or weird problems.

    As long as the computer is shutdown/restarted with out complete loss of power it doesn't ever do that so I've always wondered if that meant my OC was somehow taxing my 750TX at start too much (combined with my other components) or simply the way it works period?

  5. #405
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Lots of people have had the same thing happen. I think it's definately just the way it is with the board(s) involved. Definitely nothing to worry about.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  6. #406

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by Psycho101 View Post
    On the subject of wierd boot up problems with OC settings, mine change with the PSU I use. The Zalman I was lucky enough to win caused a boot to the backup BIOS when turned off at the wall. My OCZ (both 400W and 500W SilentXStream) caused a simple double boot, and now this HX750 causes an infinate boot loop until power is discontinued again for 30 sec.
    I always thought it was my motherboard's "dual bios" feature that was doing it haha

    For me, when I go too far on an overclock, it will reboot 2-3 times and reset all of my OC'd settings to default. But if I go WAAY TOO FAR, then I would have to clear the cmos on the board for it to post.

    Sometimes, I also get a "Scanning BIOS from hard drive" message. weird lol.

    But as long as the board still works in the end, it's all good.
    Last edited by creamsoda; 07-06-2009 at 05:00 AM.


    Core2Duo E8500 E0 @4.25GHz (500x8.5)
    | Windows 7 RC Build 7100 | Visiontek HD4850 OC 685/1100
    Gigabyte
    GA-EP45T-DS3R | 4Gb (2x2Gb) 1333MHz Patriot DDR3 | 1.14TB (640+500gb) WDC Green
    Antec Earthwatts 500w |
    Antec Nine Hundred
    Screenshots:
    [1][2][3][4][5][6]

  7. #407
    Join Date
    Mar 2009
    Location
    Romania :(
    Posts
    95

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by devoh View Post
    found this in the BIOS section http://forums.tweaktown.com/f69/giga...tml#post305426


    So it sounds like it contains the new AHCI ROM code to boot faster...

    I'm tempted...

    -devoh
    As far as I heard, it's still the old 1.07 AHCI. I own a UD3R and there was no update in AHCI.
    GA-EP45-UD3R (F12)
    Zalman CNPS-7000C-CU
    E8400@3.6GHz
    2x2GB A-DATA Vitesta 800+ CL4 Extreme Edition @ 1066MHz@2.0V (5-5-5-15)
    Asus EN9800GT Ultimate @ 810/2000/2200
    Seagate 250GB + WD 500GB + WD 640GB
    Asus DRW 1608-P
    BenQ G2010WP
    Thermaltake TR2 500W
    Windows 7 Pro x64

  8. #408
    Join Date
    Jun 2009
    Posts
    66

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Hey, there is some liquid stuff dripping out of my computer - it looks like copper and liquid glass.
    Oh, wait.....
    Case: Cooler Master Sniper
    PSU: Thermaltake Toughpower 750
    UPS: APC CS 500
    CPU: Intel QX9650 3.00 GHZ Cooler: Xigmatek Black Knight
    MB : Gigabyte GA-EP45T-DS3R Rev 1 Bios:F2 Bus:333
    Ram: 4GB (2X2GB) DDR3 Corsair XMS TW3X4G1600C9DHX (9 9 9 24 1.8V ver 3.2)
    GPU: EVGA Nvidia 8800 GTX 768 MB
    HDD: Western Digital Raptor 150GB SATA
    DVD: Memorex CD/DVD Writer 52X/32X/16X
    Display: Sharp LC-42D72U 42 in LCD 60Hz
    OS: Windows XP PRO SP3
    Misc: Seagate 300GB SATA Drive in Kingwin hot swap module (used for image backups)


  9. #409
    Join Date
    Jul 2009
    Posts
    19

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by morph View Post
    @edge929: your PLL voltage is set way too high. Don't go above 1.61 at most for daily use. Even that shouldn't be needed. Also, VTT is almost at the maxmium level of 1.4V so you should try and decrease that as well. You shouldn't probably need all that vcore for you CPU to do 4GHz, as it's a 1.225V vid, but who knows, maybe it's a bad overclocker like mine. Oh, and try decreasing MCH reference to .74 or .72 with you VTT set to 1.2V then increase VTT aack to desired level.
    I'm working on dropping voltages and tightening RAM timings right now. Slow process. I knew I was playing with fire with that high PLL. I'll play with VTT and Vcore but I doubt I'll be able to go more than 2 notches down on each. Running out of BIOS setting saves, lol.

    Get some info on F10 rolling in. If boot time is a few seconds faster and OCing stays the same, I'll switch to it. I hate when the BIOS hangs for 3-4 seconds between POST and starting to load windows.
    CPU: E8400 C0 @ 534x7.5 (4005mhz) 1.36 VCore
    Cooler: Prolimatech Megahalems + 120mm fan
    Mobo: Gigabyte EP45-UD3P v1.1 Bios F7
    RAM: 2x2GB GSkill 1068mhz 1:1 @ 5-5-5-15 2T 9 tRD 2.10 VDimm
    GPU: XFX Radeon 5870 @ 900/1400
    HDD: Intel 80GB X25-M & WD 750GB AAKS
    PS: Corsair 750HX 80+ Gold Certified
    Case: HSPC Top Deck Tech Station
    Displays: HP LP2475w & Dell 2007WFP (IPS or bust)
    Fans: 2x 120mm on NB/RAM/Mosfets
    OS: Windows 7 Home Premium 64-bit
    Rig Picture

  10. #410

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by edge929 View Post
    I hate when the BIOS hangs for 3-4 seconds between POST and starting to load windows.
    Those 3-4 seconds are there for a good reason.. It's checking for bootable devices & drivers.

    You're not gonna get rid of it by updating the BIOS..


    Core2Duo E8500 E0 @4.25GHz (500x8.5)
    | Windows 7 RC Build 7100 | Visiontek HD4850 OC 685/1100
    Gigabyte
    GA-EP45T-DS3R | 4Gb (2x2Gb) 1333MHz Patriot DDR3 | 1.14TB (640+500gb) WDC Green
    Antec Earthwatts 500w |
    Antec Nine Hundred
    Screenshots:
    [1][2][3][4][5][6]

Page 41 of 89 FirstFirst ... 31394041424351 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •