Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 47 of 89 FirstFirst ... 37454647484957 ... LastLast
Results 461 to 470 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #461

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    OK LSD, here goes...

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10b
    ***************************************
    ***************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.32GHz( 540x8.0)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 540]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1080
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................18...: [  18]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [ 800Mhz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [ 800Mhz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.42500V] <--IBT was stable lower than this but Prime Large fails
    CPU Termination........1.200V.........: [1.320V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Normal]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.340V] <--Also tried 1.320V, trying to avoid using 1.360V
    MCH Reference..........0.760V.........: [0.796V] (0.720V with CPU Termination @ 1.200V)
    MCH/DRAM Reference.....0.900V.........: [Normal]
    ICH I/O................1.500V.........: [Normal]
    ICH Core...............1.100V.........: [Normal]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V]
    DRAM Termination.......0.900V.........: [Normal]
    Channel A Reference....0.900V.........: [Normal]
    Channel B Reference....0.900V.........: [Normal]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  2. #462
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Hmm, that's alot of Auto's.....

    Have you tried driving strength 1066 again lately? Should be better for you now.

    I'd say try these and see if they help you gain that large stability

    PCI Express Frequency(Mhz)............: [100] << try 101-103


    MCH Ref try .74 w/ Vtt @ 1.20 of course.

    Seems like alot of MCH Core voltage, any reason why so high? Maybe also try less vcore as you said it was stable, but raise Vtt one notch



    Try these skews as a latter resort
    CPU Clock Skew........................: [ 0ps] << 50-150
    MCH Clock Skew........................: [ 0ps] << 150-250

  3. #463

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Cheers buddy, will give them a go tonight.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  4. #464
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Well??? How is it going D-and-W? Did you try the skew yet?

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  5. #465

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Prime Large has just failed @ 17.5hrs on one core, going to reboot and make a note of what was used...brb
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  6. #466

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10b
    ***************************************
    ***************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.32GHz( 540x8.0)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 540]
    PCI Express Frequency(Mhz)............: [102] <--Currently testing 101 after it passed 17.5hrs @ 102
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1080
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................18...: [  18]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [ 800Mhz] <--Cannot fully boot @ 1066Mhz
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [ 800Mhz] <--Cannot fully boot @ 1066Mhz
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.41875V] <--Been able to reduce this a couple of notches
    CPU Termination........1.200V.........: [1.360V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Normal]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.300V] <--New improved lower MCH Core
    MCH Reference..........0.760V.........: [0.821V] (0.720V with CPU Termination @ 1.200V)
    MCH/DRAM Reference.....0.900V.........: [Normal]
    ICH I/O................1.500V.........: [Normal]
    ICH Core...............1.100V.........: [Normal]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V]
    DRAM Termination.......0.900V.........: [Normal]
    Channel A Reference....0.900V.........: [Normal]
    Channel B Reference....0.900V.........: [Normal]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  7. #467
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Still not skewing it? D-and-W don't fear the skew.

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  8. #468
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Does PCI-e frequency above 100Mhz (=above default) have any impact on stability? :-O

  9. #469
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    For me, anythnig above 103 and I can't boot. It's worth trying but YMMV.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  10. #470

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    102 does seem to have improved things slighly for me but I am still failing. Going to retry the settings above tonight to see if it was a fluke getting 17+hrs the first time...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

Page 47 of 89 FirstFirst ... 37454647484957 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •