Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 57 of 89 FirstFirst ... 747555657585967 ... LastLast
Results 561 to 570 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #561
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Ok I found a nice 28+ hours stable 500FSB with MCH Core @ 1.26 and MCH ref at 0.74 .
    24 hours stable was yesterdays benchmark!!

    Now I'm going for 530FSB... then onto CPU overclocking.


    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.1) - F10e
    ************************1**************
    ***************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [6X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 3.00GHz( 500x6.0) Underclocked
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 500]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1000
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................15...: [  15]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066Mhz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066Mhz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.2500V]
    CPU Termination........1.200V.........: [1.200V]
    CPU PLL................1.500V.........: [1.500V]
    CPU Reference..........0.760V.........: [Normal]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.260V]
    MCH Reference..........0.760V.........: [0.740V]
    MCH/DRAM Reference.....0.900V.........: [Normal]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V]
    DRAM Termination.......0.900V.........: [Normal]
    Channel A Reference....0.900V.........: [Normal]
    Channel B Reference....0.900V.........: [Normal]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Backup BIOS Image to HDD..............: [Enabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Last edited by devoh; 08-23-2009 at 12:19 AM.
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  2. #562

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Had them on order since June, they took them off the site so I cancelled the order...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  3. #563
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by devoh View Post
    Ok I found a nice 28+ hours stable 500FSB with MCH Core @ 1.26 and MCH ref at 0.74 .
    24 hours stable was yesterdays benchmark!!

    Now I'm going for 530FSB... then onto CPU overclocking.
    If you beat me with FSB I'll beat the crap outta you, you little bish :D
    I am onto 540 right now... Somewhat unlucky so far though.

  4. #564

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I have been up to 550FSB...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  5. #565
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Too bad the setups are ony applicable to anyone else. I am desperately trying to squeeze stable 540 from 1.28 MCH core. Screw CPU, 4GHz is enough for me. But the bloody chipset!

  6. #566
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by D-an-W View Post
    Had them on order since June, they took them off the site so I cancelled the order...
    Ahh, maybe they just planned to release them and now want to wait and do 5xxx series?

  7. #567

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    As usual, the review sites got them but AFAIK they couldn't produce enough high quality components (They were all hand picked) to meet demand. It seems 4870x2's have also been discontinued now too...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  8. #568
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #569
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by Octopuss View Post
    Too bad the setups are ony applicable to anyone else. I am desperately trying to squeeze stable 540 from 1.28 MCH core. Screw CPU, 4GHz is enough for me. But the bloody chipset!


    What does your 530+ template look like? I'm looking good so far @ 532FSB, I think with 1.30 MCH Core.. I really wanted a 530+FSB @ 1.28 MCH Core.. were you able to do it?

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  10. #570
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    It's too early yet, but I finally managed to find something semi-stable. 10 hours into 540x.5, 1.28 MCH core. Had VCORE and VDIMM raised though. I will know more tomorrow.
    I think the major change was setting CPU term to normal rather than having it scale with VTT.

Page 57 of 89 FirstFirst ... 747555657585967 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •