Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 89 FirstFirst ... 456781656 ... LastLast
Results 51 to 60 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #51
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Advantages of a down-draft cooler:

    • Offers more airflow to surrounding components.
    • If you have a side case fan, and they both align, you get a better feed of fresh cool air to the HSF.


    Disadvantages:

    • Much less warm air from the HSF is exhausted straight away. The mere presence of this warmer air will warm up the rest of the atmosphere in the case to a point, causing higher case temps.
    • In cases with the PSU at the bottom and no top extraction, pockets of hot air can form, usually at the top of the case or trapped between bundles of wires. This air again heats up other air passing by.


    It's worth noting on the EP45-UD3P that Gigabyte, for some unknown reason, have placed a cap on the Northbridge heatsink, preventing much top down airflow getting to it. You might want to remove it if you go for a top-down cooler.

    To summarise the thermal paste issue. There really really really is nothing between the top manufacturers and brands. Take a look over at [H]ard OCP and you'll see the only radical difference in temperatures was when they used American cheese for paste. The test failed quite quick with the cheese, but maybe it was because the CPU didn't like the taste...

    Arctic Silver when fully cured will be maybe a degree or so lower in load temperatures than MX-2, TX-2, Chillfactor etc but it can take up to 200 hours to cure. If you use your PC for 4 hours a day, that's 50 Days. If you really want cutting edge thermal paste then like I said, diamond based is best. Diamonds have 5 times the thermal conductivity of Copper and over 4 times the conductivity of Silver.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  2. #52

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    The TrUE Copper is just too heavy and over twice the price, I think it is going to be the TrUE Black 120 with MX-2.
    What I need to decide on is, do I NEED a PWM (4 pin) fan or would the Noctua NF-P12 at a fixed speed be adequate for my cooling needs
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  3. #53
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    The Nocutua should be fine. It's quieter than most fans already, plus you can either use the low noise adapter (black connector), or dial it down using speedfan.

    The TrUE copper is heavy, but it sounds worse than it is. As long as the motherboard is sound and the case is of reasonable quality, you wouldn.t have any problems. Its only moving the case where you need to be careful, and even then risk is minimal. Copper is expensive though, that's why most heatsinks will use aluminium for the most part with a small amount of copper at the base and for the heatpipes.

    According to the motherboard manual, the CPU fan header has two speed control pins. I'm presuming the fourth pin is for PWM control and pin two is a line that can be voltage controlled, usually between 12v and 5v. You just need to set CPU Smart Fan Mode to [Voltage] in the BIOS.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  4. #54
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I am normally running 445 x 9 but I just raised the fsb to 450 for you DanW. All the other bios settings are the same. At 445 it is 24hr prime95 stable, and currently priming at 450 for about 30mins, blend. Temps and vdroop are pretty much the same as when fsb was 445 so I do not foresee a problem with 450x9. My goal was just to hit 4ghz, prime stable for 24hrs with the lowest juice possible. I guess if I had an inclination I could juice up the vcore to the mid 1.30v and work the speed up to 4.2-4.5ghz, but frankly I doubt I will notice that much of difference over 4ghz for what I am using this box for. Maybe one day for $hits and giggles I might just do that.

    I am using relatively low voltages across the board and I am using 4 sticks of ram. For the most part, my bios settings are fairly similar to yours. As you are having problem at 450+, I would try loosen some of the Advanced memory timing. I have mine at auto but the auto settings are looser than yours.

    tRRD...[4]......................................[Auto]
    tWTR...[4]......................................[Auto]
    tWR....[8]......................................[Auto]
    tRFC...[68].....................................[Auto]
    tRTP...[4]......................................[Auto]

    I think yours are 3,3,5 or 6,52,3 .

    Good luck.


    Code:
    E8400 450 X 9 = 4050 MHz F9 BIOS
    
    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 9 ]
    Fine CPU Clock Ratio............................[ 0.0 ]
    CPU Frequency 4.050GHz............................[450 x 9.0]
    
    ******Clock Chip Control******
    
    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 450 ]
    PCI Express Frequency (Mhz).....................[ 100 ] 
    C.I.A 2 ........................................[Disabled]
    
    ******Advanced Clock Control******
    
    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]
    
    ******DRAM Performance Control******
    
    Performance Enhance ............................[Standard]
    Extreme Memory Profile (XMP)....................[ Disabled ]
    (G) MCH Frequency Latch.........................[ auto ] 
    System Memory Multipler.........................[ 2.00D ]
    Memory Frequency 1066...........................[ 900]
    DRAM Timing Selectable..........................[ Manual ]
    
    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 4 ]
    tRP.............................................[ 4 ]
    tRAS............................................[ 12 ]
    
    ******Advanced Timing Control******
    
    tRRD...[4]......................................[Auto]
    tWTR...[4]......................................[Auto]
    tWR....[8]......................................[Auto]
    tRFC...[68].....................................[Auto] 
    tRTP...[4]......................................[Auto]
    Command Rate (cmd)..............................[ 2 ] 
    
    
    **************************************
    
    Driving Strength Profiles
    Driving Strength .............................[ 1066 ]  
    
    Channel A
    Static tRead Value..............................[ 10 ]  
    tRD Phase0 Adjustment...........................[Auto]
    tRD Phase1 Adjustment...........................[Auto]
    tRD Phase2 Adjustment ..........................[Auto]
    tRD Phase3 Adjustment...........................[Auto]
    
    Trd2rd(Different Rank)..........................[Auto]
    Twr2wr(Different Rank)..........................[Auto]
    Twr2rd(Different Rank)..........................[Auto]
    Trd2wr(Same/Diff Rank)..........................[Auto]
    
    Dimm1 Clock Skew Control........................[Auto]
    Dimm2 Clock Skew Control........................[Auto]
    DDR Write Training..............................[Auto]
    
    Channel B
    Static tRead Value..............................[ 10 ]  
    tRD Phase0 Adjustment...........................[Auto]
    tRD Phase1 Adjustment...........................[Auto]
    tRD Phase2 Adjustment ..........................[Auto]
    tRD Phase3 Adjustment...........................[Auto]
    
    Trd2rd(Different Rank)..........................[Auto]
    Twr2wr(Different Rank)..........................[Auto]
    Twr2rd(Different Rank)..........................[Auto]
    Trd2wr(Same/Diff Rank)..........................[Auto]
    
    Dimm1 Clock Skew Control........................[Auto]
    Dimm2 Clock Skew Control........................[Auto]
    DDR Write Training..............................[Auto]
    
    ******Motherboard Voltage Control******
    
    Load-Line Calibration ..........................[Disabled]
    CPU Vcore [ 1.20 ]..............................[ 1.2625]
    CPU Termination [ 1.20 ]........................[ 1.2600 ] 
    CPU PLL [ 1.50 ]................................[ 1.57 ] 
    CPU Reference [ 0.760 ].........................[ 0.823 ]
    
    MCH Core [1.1 ].................................[ 1.200 ]
    MCH Reference [0.760 ]..........................[ 0.778 ]
    MCH/DRAM Refernce [0.900 ]......................[ 0.90 ] 
    ICH I/O [1.500 ]................................[ 1.59 ]
    ICH Core [1.100 ]...............................[ 1.20 ]
    
    DRAM Voltage [1.800 ]...........................[ 1.90 ] 
    DRAM Termination [0.900 ].......................[ 0.90 ] 
    Channel A Ref [0.900 ]..........................[ 0.90 ] 
    Channel B Ref [0.900 ]..........................[ 0.90 ] 
    
    ******Advanced BIOS Features******
    
    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Enabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Enabled ] 
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Disabled ]
    
    *******************************************
    Last edited by BoombasticSloth; 05-11-2009 at 09:42 AM.
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  5. #55

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Excellent BBS, thanks I will try your template when I get home...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  6. #56

    Thumbs up Re: GA-EP45-UD3P - Won't boot with 450FSB

    w00t!



    452FSB using the template below...
    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.06GHz( 452x9)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [452]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 900
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 5]
    x tRCD ...........................5...: [ 4]
    x tRP.............................5...: [ 4]
    x tRAS...........................18...: [12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: [ 4]
    x tWTR............................3...: [ 4]
    x tWR.............................6...: [ 8]
    x tRFC...........................52...: [68]
    x tRTP............................3...: [ 4]
    x Command Rate (CMD) .............0...: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [10]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.26250V]
    CPU Termination........1.200V.........: [1.260V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [0.823V]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [0.778V]
    MCH/DRAM Reference.....0.900V.........: [0.870V]
    ICH I/O................1.500V.........: [1.590V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.000V]
    DRAM Termination.......0.900V.........: [0.910V]
    Channel A Reference....0.900V.........: [0.910V]
    Channel B Reference....0.900V.........: [0.910V]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    ...cheers BBS

    Just ordering my TrUE Black 120 to get the temps in order then I can stability test
    Last edited by D-an-W; 05-13-2009 at 02:14 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  7. #57
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Looks good. The power of low voltage ....heheheheheh
    Yeah, usually, I find that people should loosening advanced memory timings and the static tRead Values before upping voltage as the added heat doesn't help things. Although I can't really take credit for this, as some of the more astute oc'ers on this board and in this thread for this matter have eluded to this already. So a hearty toast to those fine people.

    All the best.
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  8. #58

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I tried Prime, it froze Windows about 5 minutes in. I guess I might need to up the voltage a little seen as though yours were based on 445FSB.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  9. #59
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    A quicj=k bump of vcore to around 1.33-1.35v and another test would be useful to do, and stress test for 1 hour if temps worry you (until you get your new HSF).

    If it still freezes, my instinct tells me you should try MCH/DRAM term and A&B refs on auto. I tried all sorts of combinations personally and only found stability in Prime Large FFT on auto. YMMV though, as I'm running 4 cores.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  10. #60

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Psycho, have you ever tried the "Push / Pull" setup on the TrUE? I am about to order the fan and was wondering to get two or not?
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

Page 6 of 89 FirstFirst ... 456781656 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •