Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 66 of 89 FirstFirst ... 1656646566676876 ... LastLast
Results 651 to 660 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #651
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    But all of a sudden? Wtf!
    I refuse to go to 1.3.

  2. #652

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    All of a sudden yes, exactly.

    Why not just test 1.3, whats the worst than can happen (No singing now...)!

    I am back to my 6hr **mins failures now with 480x9...

    Help!

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10e
    ***************************************
    ***************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.32GHz( 480x9.0)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 480]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [   5]
    x tRP.............................5...: [   5]
    x tRAS...........................15...: [  15]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [OC-1333]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [OC-1333]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.40000V]
    CPU Termination........1.200V.........: [1.320V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Normal]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.320V]
    MCH Reference..........0.760V.........: [0.796V] (0.720V with CPU Termination @ 1.200V)
    MCH/DRAM Reference.....0.900V.........: [Normal]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.040V]
    DRAM Termination.......0.900V.........: [Normal]
    Channel A Reference....0.900V.........: [Normal]
    Channel B Reference....0.900V.........: [Normal]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Backup BIOS Image to HDD..............: [Enabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Last edited by D-an-W; 08-30-2009 at 12:39 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  3. #653
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I don't get it why should the PC screw up all of a sudden!
    It just makes no sense at all!
    And 1.3MCH is way too much for crappy 540FSB!
    Bleh bleh bleh.
    I might as well try for 533x8 again instead.
    I will retest 533x7.5 (1.28MCH, 1.32500VCORE) fully again, save it, and then either call it a day or continue...

  4. #654
    Join Date
    Aug 2009
    Posts
    19

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by Octopuss View Post
    And 1.3MCH is way too much for crappy 540FSB!
    Bleh bleh bleh.
    1.30v MCH is nothing...is the NB getting hot, or can you easily put 1.32-1.36v? How about adding a fan to NB ?

    I'm not comfortable putting 1.36v MCH or above, but one day I'm there... you're at 1.30v today...raise ffs !
    Q9650 (4.2GHz, 1.381v BIOS)
    EP45 UD3P (Rev 1.1, F10 BIOS)
    2x2GB OCZ Blade PC2-9200 Low Voltage 1.8v (1.12GHz, 1.82v, Turbo)
    Corsair HX1000
    2x GTX260 216SP - SLI Hack
    Samsung F3 1TB
    2x DVD RW SATA
    USB Floppy
    Logitech
    MX518 + G11
    Windows 7 x64

  5. #655
    Join Date
    Aug 2009
    Posts
    19

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    [QUOTE=D-an-W;316438]
    I am back to my 6hr **mins failures now with 480x9...

    Help!

    [CODE]
    CPU Clock Drive.......................: [900mV]
    (G)MCH Frequency Latch................: [400]
    x tRAS...........................15...: [ 18]

    x Static tRead Value.............11...: [ 9, 10, 11]
    x Driving Strength Profile............: [AUTO?]

    MCH Reference..........0.760V.........: [0.796V] (0.720V with CPU Termination @ 1.200V...this is VERY low compared to Quads..0.785v of
    1.20v)

    MCH/DRAM Reference.....0.900V.........: [AUTO]
    DRAM Termination.......0.900V.........: [AUTO]
    Channel A Reference....0.900V.........: [AUTO]
    Channel B Reference....0.900V.........: [AUTO]
    Q9650 (4.2GHz, 1.381v BIOS)
    EP45 UD3P (Rev 1.1, F10 BIOS)
    2x2GB OCZ Blade PC2-9200 Low Voltage 1.8v (1.12GHz, 1.82v, Turbo)
    Corsair HX1000
    2x GTX260 216SP - SLI Hack
    Samsung F3 1TB
    2x DVD RW SATA
    USB Floppy
    Logitech
    MX518 + G11
    Windows 7 x64

  6. #656
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by TweakerOwn View Post
    1.30v MCH is nothing...is the NB getting hot, or can you easily put 1.32-1.36v? How about adding a fan to NB ?

    I'm not comfortable putting 1.36v MCH or above, but one day I'm there... you're at 1.30v today...raise ffs !
    I already got a fan there... So the temperature is not a problem... But I just hate the feel :D lol I know, but... really ffs, ugh... :D

  7. #657
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Allright, I decided to ditch the FSB because I can't tell whether I run into memory limits or not (which makes the testing more complicated), and try for 533x8 again.
    So far I had absolutely no luck with:
    1.38750VCORE and normal CPU ref, and whole range of 1.2-1.36VTT - instant Prime failure.

    Getting onto the same track with 0.760@1.2VTT.
    Don't tell me my CPU needs 1.4+ VCORE for 4.2GHZ damnit!

  8. #658
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    It's possible. It may do 4.2GHz nicely on super low Vcore with max multi, but that high of a FSB may be playing with it's head. 540FSB is like me smoking a phat joint after not seeing even a sniff of the stuff for 5 years. When one has tolerance it's a chill out smoke, but when you're completely fresh it can be a right trip

    Maybe your CPU is tripping, ie either it's at its stable FSB limit or it needs a disproportional bit of encouragement in the form of voltage.

    Keep tinkering. I know you're capable. It may be though that you're fighting a difficult, if not impossible battle. If my E7400 has a FSB limit (with my config) of 425 FSB, yours may reasonably be at the 500-550 mark.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  9. #659
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    All this testing and these PC's may die or run away before you enjoy them

  10. #660
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    lol even my old 533x7.5 is not stable anymore
    what the hell
    voodoo...

Page 66 of 89 FirstFirst ... 1656646566676876 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •