Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 84 of 89 FirstFirst ... 34748283848586 ... LastLast
Results 831 to 840 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #831
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I gotta try!

  2. #832
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    This sucks, Small FFTs are perfectly stable, but Blend keeps on failing until I raise VCORE several times. Not fair!!!!
    Perhaps I should go Dan's 510x8 way.

  3. #833

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I left mine off overnight (Shock!) to "settle", now I am retrying 810x8.5 for none stress stability. Trying to get the house back to some form of normallity too after the bathroom and kitchen so will update later...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  4. #834
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Lowest VCORE you managed to get 4-4.1GHz stable with=?
    And what was the point of major voltage increase needed as Psycho or who mentioned for everyone?

  5. #835

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Bare in mind my VID isn't the best...

    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************

    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [8X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.08GHz( 510x8.0)

    ********** Clock Chip Control ********

    >>>>> Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [ 510]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]

    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [ 0ps]
    MCH Clock Skew........................: [ 0ps]

    ******** DRAM Performance Control ********

    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1020
    DRAM Timing Selectable (SPD)..........: [Manual]

    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [5]
    x tRCD ...........................5...: [ 5]
    x tRP.............................5...: [ 5]
    x tRAS...........................18...: [ 15]

    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto

    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto

    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto

    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto

    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [1066MHz]

    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto

    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto

    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value..............7...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto

    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto

    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto

    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [1066MHz]

    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto

    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto

    ****** Motherboard Voltage Control ******

    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.30625V] (Five up from default)
    CPU Termination........1.200V.........: [1.200V]
    CPU PLL................1.500V.........: [1.570V] (One up from default)
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.300V] (Eight up from default)
    MCH Reference..........0.760V.........: [0.740V] (One down from default)
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.200V] (One up from default)
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.020V] (One up from default - DDR18V = 2.016V in PC Health Status)
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]

    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................: Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]

    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  6. #836
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Don't you guys fancy a break from OCing? Resident Evil 5 and Batman Arkham Assylum are both out now.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  7. #837
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Seriously Dan, 510x8.5 is a good balanced setup if the settings that you posted are stable with vcore a 1.30625v. Enjoy your computer.
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  8. #838
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Regarding anyone with sudden instability issues at settings that used to be stable. I unrared a large group of files today and got an archive corrupt message. I then ran my two 10GB archive tests (a single 14GB HD-DVD ISO and a mixed archive of large and small files) and confirmed the instability. This has appeared since flashing to F10f. I had to lower MCH Ref another step, down to 0.70V @ 1.2VTT to correct it.

    I can't say for sure that the F10F BIOS is to "blame" as I can't be bothered flashing back to F10e to test. However the tests dd pass when ran with F10e with MCH Ref set to 0.720 @1.2VTT. Anyone using F10f bear in mind that voltages and GTLrefs may need altering, or indeed they may not, depending on your config.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  9. #839
    Join Date
    Aug 2008
    Posts
    615

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    1.30625? You gotta be kidding me!!
    I am 25 hours into 510x8 Blend only, and I am sure I can't get under 1.35V.
    But I could probably try with higher MCH core hoping for lower VCORE.
    Well, bleh... anyway.

  10. #840
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Quote Originally Posted by Psycho101 View Post
    Regarding anyone with sudden instability issues at settings that used to be stable. I unrared a large group of files today and got an archive corrupt message. I then ran my two 10GB archive tests (a single 14GB HD-DVD ISO and a mixed archive of large and small files) and confirmed the instability. This has appeared since flashing to F10f. I had to lower MCH Ref another step, down to 0.70V @ 1.2VTT to correct it.

    I can't say for sure that the F10F BIOS is to "blame" as I can't be bothered flashing back to F10e to test. However the tests dd pass when ran with F10e with MCH Ref set to 0.720 @1.2VTT. Anyone using F10f bear in mind that voltages and GTLrefs may need altering, or indeed they may not, depending on your config.

    Yeah I didnt like F10f bios either I flashed back to F10e. F10f needed to much volts to get stable unlike F10e. (at least for me that is) Here is a pic what what im running now and will pass 20 pass of LinX all ram. I tried Prime blend and core 3 failed around 1hr while the rest ran for 8hrs.

    475x9 @ 1.3375v w/LLC on
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





Page 84 of 89 FirstFirst ... 34748283848586 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •