Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: EX58-UD3R Triple Channel problem




  1. #1
    Join Date
    May 2009
    Posts
    1

    Default EX58-UD3R Triple Channel problem

    Hello TT, I bought my first ex58-ud3r(1.0) a few months ago and everything was running smooth until i accidentally made it go pop :\ After getting my new one and putting everything back together, and turning it on I got a series of rapid beeps from my system speaker for about 20 seconds, then it would restart and loop. The first thing I did was removed the 3rd stick of RAM which allowed me to boot properly, and everything was solid except for memory running in dual channel and the lack of 2 gigs. Since then i've tried just about everything I can think of to test the individual RAM sticks and slots. I can boot with any combo of 1 stick in any slot, so I'm assuming everything is in physical working condition. I've gone through and bumped up voltages for qpi and ram with no luck. Everything works fine in dual channel and my OS is only 32 bit so the extra 2 gigs aren't a huge deal right now, but you know how it is, there is something wrong with my pc so i want to fix it! I've also flashed to each new bios as they've been released up to F5, I downloaded F6b, but none of the updates have helped thus far so I'll save that for later. Thanks in advance for any help.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EX58-UD3R Triple Channel problem

    Did you, or can you, check your CPU Socket for bent pins? This often causes this kind of issue.

    If you looked and do not find any, can you please tell me what exact ram you have (Link or Model #), and give me your settings and I will see if I see any issues >>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tWTP .......................................
    tWL ........................................   (tWTP Must = tWR + tWL + 4)(tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................
    QPI/VTT Voltage 1.150v ............
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •