Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: q6600 3.6ghz ep 45dsl help




  1. #21
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [##] 9
    Fine CPU Clock Ratio ----------------- : [0.0] < ignore if not available
    CPU Frequency ---------------------: #### 3.60ghz (400x9)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [Mhz] 400
    PCI Express Frequency (Mhz) ---------- : [Auto] <--- 100
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 800
    CPU Clock Skew (ps) ------------------ : <<< 0
    MCH Clock Skew (ps) ------------------ : <<< 0
    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo] <--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto] 400
    System Memory Multiplier -------------- : [Auto] 2.66d
    Memory Frequency (Mhz) ---------------- : [Auto] 1066
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [Auto] 5
    tRCD ------------------- ?? ---------- : [Auto] 6
    tRP --------------------- ?? ---------- : [Auto] 6
    tRAS ------------------- ?? ---------- : [Auto] 18
    Advanced Timing Control
    tRRD ------------------- ?? ---------- : [Auto]
    tWTR ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC ------------------- ?? ---------- : 55
    tRTP ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
    Channel A
    Static tRead Value ----------- ?? ------ : [Auto] 7
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto] ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto] ps
    Channel B
    Static tRead Value ----------- ?? ------ : [Auto] 7
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto] ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto] ps
    Motherboard Voltage Control
    CPU
    CPU Vcore --------------- 1.????? ---- : 1.493(just one notch under 1.5
    CPU Termination --------- 1.200V* ----- : 1.44
    CPU PLL ----------------- 1.500V* ----- : 1.55
    cPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : 1.4
    MCH Reference ----------- 0.800V ------- : [Auto]
    ICH I/O ----------------- 1.500V ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800V ------- : 2.1(manufacturer settings)
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled] disabled
    No-Execute Memory Protect -------------- : Enabled
    CPU Enhanced Halt (C1E) ---------------- : [Disabled] disabled
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled] enabled
    CPU EIST Function --------------------- : [Disabled] disabled
    Virtualization Technology -------------- : [Disabled] disabled
    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Enabled] disabled
    Last edited by wutsup; 05-21-2009 at 01:20 AM.

  2. #22
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    bump

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •