Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: q6600 3.6ghz ep 45dsl help




  1. #1
    Join Date
    Nov 2008
    Posts
    71

    Default q6600 3.6ghz ep 45dsl help

    hey guys im stable at 3.2ghz with these settings

    400x8
    cpu vcore 1.325 in bios 1.28 in windows
    cpu vtt(termination) 1.28
    cpu pll 1.55 (default)
    everything else on auto for cpu

    mch vcore 1.16
    everything else related to northbridge southbridge on auto

    memory is ddr2 5 6 6 18 1066 4gb 400 mch latch 2.66D

    i tried 1.475 cpu vcore for 3.6ghz (1.41 or so in widows)
    1.38 cpu termination
    1.55 cpu pll
    mch vcore 1.3

    but its not stable any help would be nice thanks oh yea and my cpu vid is 1.275

  2. #2
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    stop trolling

    hey LSD if you see my thread can you help me out thanks alot

  3. #3
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    bump

  4. #4
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: q6600 3.6ghz ep 45dsl help

    Lsdme is offline for now. Bumping your thread keeps it on page 1, but Lsdme always starts with the oldest recent threads, so bumping it will delay his getting to you.

    If you want specific bios suggestions, we need the following.
    1) List your system components in your signature.
    --> User CP tab (upper left corner of web page)
    --> select Edit Signature
    --> preview
    --> Save when complete
    --> Bios version
    2) Link to your ram's full specifications.
    3) Fill in the generic bios template with your bios settings.
    --> Fill in Auto where appropriate.
    --> Change ?? values to the displayed settings in your bios, including the values shown in the voltages sections of this template.

    Code:
    Motherboard: Model, Rev#:
    Bios version: F??
    Cpu: Model
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Brand, Model#, Wattage
    
    Default settings for new setups that are not overclocked.
    
    note: replace all ?? with the value displayed in your bios.
    ----> where appropriate replace Auto settings with manually set values
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto] <--- FAST is OK
    CPU Clock Ratio ---------------------- : [##]
    Fine CPU Clock Ratio ----------------- : [0.0] < ignore if not available
    CPU Frequency ---------------------: ####
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [Mhz]
    PCI Express Frequency (Mhz) ---------- : [Auto] <--- Set to 100, never leave this on Auto
    
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    
    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo] <--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [Auto]
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking
    
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [Auto]
    tRCD  ------------------- ?? ---------- : [Auto]
    tRP --------------------- ?? ---------- : [Auto]
    tRAS  ------------------- ?? ---------- : [Auto]
    
    Advanced Timing Control
    tRRD  ------------------- ?? ---------- : [Auto]
    tWTR  ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC  ------------------- ?? ---------- : [Auto]
    tRTP  ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
    
    Channel A
    Static tRead Value ----------- ?? ------ : [Auto]
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto]  ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto]  ps
    
    Channel B
    Static tRead Value ----------- ?? ------ : [Auto]
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto]  ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto]  ps
    
    Motherboard Voltage Control
    CPU
    CPU Vcore --------------- 1.?????  ---- : [Auto] <--- set to the 1.????? value
    
    CPU Termination --------- 1.200V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU PLL ----------------- 1.500V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    
    CPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    CPU Reference2 ---------- 0.800V* ----- : [Auto] <--- Auto Will set this correctly
    
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto] <--- set to 1.20 for 2x2GB ram (1.24 - 1.26, or 1.05 might be needed)
    MCH Reference ----------- 0.800V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [Auto] <--- set to the value to the left
    ICH Core ---------------- 1.100V ------- : [Auto] <--- set to the value to the left
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto] <--- set to the max rated ram voltage (for most memory)
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled] <--- Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect  ------------- : [Enabled] <--- set to Disabled when overclocking (this must be enabled to flash or boot from a USB drive)
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #5
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    i tried copying and pasting the template in the eply box but only half of it shows up?
    Last edited by wutsup; 05-15-2009 at 05:47 AM.

  6. #6
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: q6600 3.6ghz ep 45dsl help

    Try copying the template and pasting it into a text editing program like Notepad.
    Enter your bios settings and save it on your hard drive.
    Copy your saved bios settings and paste all the text into the forum "Reply To Thread" box.

    Are you using the "Quick Reply" box or clicking on the "Post Reply" tab?
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #7
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    ok so here is my q6600 at 3.2 ghz stable but now i want to go for 3.6(400x9) angy suggestions for voltages and stuff would be really helpful cause i already trieda cpu vcore of 1.475 cpu termination at 1.38 and mch vcore at 1.3 and it crashes almost instantly durng prime 95 small ftts


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [##] 8
    Fine CPU Clock Ratio ----------------- : [0.0] < ignore if not available
    CPU Frequency ---------------------: #### 3.2ghz (400x8)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [Mhz] 400
    PCI Express Frequency (Mhz) ---------- : [Auto] <--- 100
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 800
    CPU Clock Skew (ps) ------------------ : <<< 0
    MCH Clock Skew (ps) ------------------ : <<< 0
    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo] <--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto] 400
    System Memory Multiplier -------------- : [Auto] 2.66d
    Memory Frequency (Mhz) ---------------- : [Auto] 1066
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [Auto] 5
    tRCD ------------------- ?? ---------- : [Auto] 6
    tRP --------------------- ?? ---------- : [Auto] 6
    tRAS ------------------- ?? ---------- : [Auto] 18
    Advanced Timing Control
    tRRD ------------------- ?? ---------- : [Auto]
    tWTR ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC ------------------- ?? ---------- : [Auto]
    tRTP ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
    Channel A
    Static tRead Value ----------- ?? ------ : [Auto] 7
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto] ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto] ps
    Channel B
    Static tRead Value ----------- ?? ------ : [Auto] 7
    tRD Phase0 Adjustment -------- ?? ------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment -------- ?? ------ : [Auto]
    tRD Phase2 Adjustment -------- ?? ------ : [Auto]
    tRD Phase3 Adjustment -------- ?? ------ : [Auto]
    Trd2rd(Different Rank) ------- ?? ------ : [Auto]
    Twr2wr(Different Rank) ------- ?? ------ : [Auto]
    Twr2rd(Different Rank) ------- ?? ------ : [Auto]
    Trd2wr(Same/Diff Rank) ------- ?? ------ : [Auto]
    Dimm1 Clock Skew Control ----- ?? ------ : [Auto] ps
    Dimm2 Clock Skew Control ----- ?? ------ : [Auto] ps
    Motherboard Voltage Control
    CPU
    CPU Vcore --------------- 1.????? ---- : [Auto] <--- 1.325
    CPU Termination --------- 1.200V* ----- : [Auto] 1.28
    CPU PLL ----------------- 1.500V* ----- : [Auto] 1.55
    CPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    CPU Reference2 ---------- 0.800V* ----- : [Auto] <--- Auto Will set this correctly
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto] <--- 1.16
    MCH Reference ----------- 0.800V ------- : [Auto] auto
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto] auto
    ICH I/O ----------------- 1.500V ------- : [Auto] auto (should i set it to whatever my bios says)
    ICH Core ---------------- 1.100V ------- : [Auto] auto ('')
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto] 2.1(manufacturer settings)
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled] disabled
    No-Execute Memory Protect -------------- : [Enabled] disabled
    CPU Enhanced Halt (C1E) ---------------- : [Disabled] disabled
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled] enabled
    CPU EIST Function --------------------- : [Disabled] disabled
    Virtualization Technology -------------- : [Disabled] disabled
    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Enabled] disabled

  8. #8
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: q6600 3.6ghz ep 45dsl help

    Please provide a link to your ram's specifications.

    Try these settings for 9 x 400MHz

    DRAM Performance Control
    Performance Enhance ------------------- : [Disabled]
    Extreme Memory Profile ---- (X.M.P.) ---- : [Disabled]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier ---------------- : [2.66D]
    Memory Frequency (Mhz) ------------ 1066
    DRAM Timing Selectable ------------------ : [Manual]
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [5]
    tRCD --------------------- ?? ---------- : [6]
    tRP ---------------------- ?? ---------- : [6]
    tRAS --------------------- ?? ---------- : [18]

    CPU
    Load-Line Calibration -------------------: [Disabled]
    CPU Vcore --------------- 1.????? ----- : [1.3250] <--- set to 1.4125
    CPU Termination --------- 1.200V* ----- : [1.28] <--- set to 1.30 (higher may be needed)
    CPU PLL ----------------- 1.500V* ----- : [1.55]
    CPU Reference ----------- 0.755V* ----- : [Auto]
    CPU Reference2 ---------- 0.800V* ----- : [Auto]
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.16] <--- higher may be needed, do this last
    MCH Reference ----------- 0.800V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ------------------ 1.500V ------- : [Auto] <--- set to 1.57
    ICH Core ----------------- 1.100V ------- : [Auto] <--- set to 1.20
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [2.10] <--- set to 2.12
    DRAM Termination --------- 0.900V ------- : [Auto]
    Channel A Reference ------ 0.900V ------- : [Auto]
    Channel B Reference ------ 0.900V ------- : [Auto]

    Integrated Peripherals
    Legacy USB Storage Detect -------------- : [Disabled]

    When you manually set a value, do not leave "[Auto]" in your posted bios. Make your posted bios look like what you see in your bios.

    Detail any errors or problems, such as:
    boot error and bios reset
    BSOD
    windows froze when .....
    Prime95 rounding error at 1hour, 34 minutes, thread #2 only
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #9
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.6ghz ep 45dsl help

    sorry about the ram OCZ Technology | Products | Memory | OCZ DDR2 PC2-8500 Gold Edition 4GB Dual Channel

    ok so i tried your settings except for cpu at 1.36 and my stock ich i/o is 1.55 so i tried 1.57 like you said and my mem voltage is at 2.1(manufacturer specs)

    problem: i get a bsod right after the windos vista loading bar
    error: 0x00000005(i think thats the right about of 0's)

    and is there a reason not to keep the mch strap at 400? is auto more stable?

  10. #10
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: q6600 3.6ghz ep 45dsl help

    The 2.66D memory multiplier uses the 400-strap.
    Have you tried some of the different settings I suggested in my previous post?
    CPU Vcore --------------- 1.????? ----- : [1.3250] <--- set to 1.4125
    CPU Termination --------- 1.200V* ----- : [1.28] <--- set to 1.30 (higher may be needed)

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.16] <--- higher may be needed, do this last

    Most 2x2GB ram runs best with MCH Core set to 1.24 - 1.26, but some ram will only run at or near 1.05 volts. Try increasing this in steps to see if you gain stability.
    CPU Vcore might have to be increased to run at 3.60GHz.
    CPU Termination is usually set at least 0.05 - 0.10 volts LOWER than CPU Vcore.

    Your Q6600 is rated up to 1.50 volts, so you have some room to spare with trying somewhat higher cpu vcore settings.

    Error 0x00000005 is an ACCESS VIOLATION and is probably related to incorrect voltage settings.

    my 2 cents: I've seen other Q6600 setups at 3.60GHz with very high voltages. My preference is stop well before the point where very high voltages are required. In your case, running nearer to 3.40GHz might provide you with a nice compromise with performance versus high heat/temps. It's your call.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •