Gigabyte x38-dq6
Intel Xeon e3110
Ultra 120 extreme
4GB G.skill DDR2-1066 F2-8500CL5D
EVGA gtx260 sc
150GB raptor hd
Corsair 620HX PSU

According to aquamark3 my cpu isnt performing as well as it was a yr ago(16kcpu score down to 8k). The only addition i have made to my setup is a new gfx card (gtx260). I downloaded cpuz and noticed my multiplier would not exceed 8x and the core speed 2600MHz. I have changed the settings in the bios, but my aquamark score is still far from what it was.
168k with 8800gts 1 yr ago
112k with gtx260
I have a fresh install of winxp sp3 and all latest drivers

Any help would be much appreciated.

Cheers


MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 9
CPU Frequency ...........................: 3.00GHz
Clock Chip Control Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........:100
C.I.A.2 .................................:[Disabled]
[Turbo]
System Memory Multiplier (SPD).........[3.20B]
Memory Frequency(MHz) 800 1066
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
RCD .........................................5
tRP'...........................................5
tRAS..........................................15
Advanced Timing Control
all auto
Clock Driving And Skew Control
CPU/PCIEX Clock Driving Control...........................: 800mv
CPU Clock Skew Control......................................[Normal]
(G)MCH Clock Skew Control..............................[Normal]
*******System Voltage Not Optimized!!!*******
System Voltage Control.....................................[Manual]
DDR2 Overvoltage control..................................[+0.25V]
PCI-E overvoltage Control..................................[Normal]
FSB Overvoltage Control................................[Normal]
(G)MCH Overvoltage Control..........................[Normal]
MCH Reference Voltage Control......................[Normal]
DDR Reference Voltage Control.......................[Normal]
DDR Termination Voltage Control......................[Normal]
CPU GTLREF1 Voltage Ratio..........................[Auto]
CPU GTLREF2 Voltage Ratio..........................[Normal]
Loadline Calibration....................................... ....[Auto]
CPU Voltage Control........................................[Normal]
Normal CPU Vcore......................................1.22500 V