Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11

Thread: GA-EP45T-UD3R (rev. 1.0) with Corsair TW3X4G1600C9DHX not work properly




  1. #11

    Default Re: GA-EP45T-UD3R (rev. 1.0) with Corsair TW3X4G1600C9DHX not work properly

    Your settings should let you boot normally. Just try two more things.
    First change FSB to 402~405 just to avoid being on the strap frequency.
    If this doesn't help move your ddr3 to the pink slots and try again.
    If successful try to lower MCH voltage (you don't need much for 2xGB) and check again. From my experience with ddr3 running at 1600Mhz 10-11-11-30 is not a good idea - you can always test at 1333MHz 9-9-9-24 with lower Static tRead value to check if your memory bandwidth is increased.
    Last edited by Comers; 05-25-2009 at 07:46 PM.
    GA-X48T-DQ6 [rev: 1.3], Bios F6e (replacement of GA-EP45T-UD3P [rev: 1.0])
    Q9550 (E0), Zalman CNPS9500 Cooler
    2x2GB Kingston HyperX [KHX13000D3LLK2/2G] 1.7V DDR3-1333 @7-7-7-20
    Gainward Bliss 8800GT, 2x1TB HDD Samsung SATA-2, CoolerMaster Real Power Pro 850W PSU

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •