Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: EP45T-DS3 with Transcend TX1800KLU-2GK, 4x1 Gb




  1. #1
    Join Date
    Oct 2008
    Posts
    15

    Default EP45T-DS3 with Transcend TX1800KLU-2GK, 4x1 Gb

    Hi, guys!<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Need your help with this rig:<o:p></o:p>
    GA-EP45T-DS3,F3<o:p></o:p>
    DDR3 1800Transcend TX1800KLU-2GK, 4x1 Gb<o:p></o:p>
    Q9300
    The problem is that I unable to start machine with cpu working on stock FSB (333) with memory on 1333.<o:p></o:p>
    MB Intelligent Tweaker (M.I.T.)
    Robust Graphics Booster..................: [Auto]
    CPU Clock Ratio............................: [7x]
    Fine CPU Clock Ratio......................: [+0.5]
    CPU Frequency.............................: 2.5GHz (333*7.5)
    Clock Chip Control
    Standart Clock Control
    CPU Host Clock Control...................: [Enabled]
    CPU Host Frequency (Mhz)...............: 333
    PCI Express Frequency (MHz)............: [100]
    C.I.A. 2.....................................: [Disabled]
    Advanced Clock Control
    CPU Clock Drive...........................: [800 mV]
    PCI Express Clock Drive..................: [900 mV]
    CPU Clock Skew (ps)......................: [0 ps]
    MCH Clock Skew (ps).....................: [0 ps]
    DRAM Performance Control
    Performance Enhance.....................: [Standard]
    Extreme Memory Profile (XMP)..........: [Disabled]
    (G)MCH Frequency Latch.................: [333]
    System memory Multiplier................: [4.00B]
    Memory Frequency (MHz).........1066..: 1333
    DRAM Timing Selectable..................: [Auto]
    Standart Timing Control
    CAS Latency Time..........................: 7 [Auto]
    tRCD.........................................: 7 [Auto]
    tRP...........................................: 7 [Auto]
    tRAS.........................................: 20 [Auto]
    Advanced Timig Control
    tRRD.........................................: 4 [Auto]
    tWTR........................................: 4 [Auto]
    tWR..........................................: 8 [Auto]
    tRFC.........................................: 60 [Auto]
    tRTP.........................................: 4 [Auto]
    Command Rate (CMD).....................: 0 [Auto]
    Channel A
    Static tRead Value.........................:7 [Auto]
    tRD Phase0 Adjustment...................:0 [Auto]
    tRD Phase1 Adjustment...................:0 [Auto]
    tRD Phase2 Adjustment...................:0 [Auto]
    tRD Phase3 Adjustment...................:0 [Auto]
    Trd2rd(Different Rank)....................:9 [Auto]
    Twr2wr(Different Rank)...................:7 [Auto]
    Twr2rd(Different Rank)...................:7 [Auto]
    Trd2wr(Same/Diff Rank).................:10 [Auto]
    Channel B
    Static tRead Value........................: 7 [Auto]
    tRD Phase0 Adjustment..................:0 [Auto]
    tRD Phase1 Adjustment..................:0 [Auto]
    tRD Phase2 Adjustment..................:0 [Auto]
    tRD Phase3 Adjustment..................:0 [Auto]
    Trd2rd(Different Rank)...................:9 [Auto]
    Twr2wr(Different Rank)..................:7 [Auto]
    Twr2rd(Different Rank)...................:7 [Auto]
    Trd2wr(Same/Diff Rank).................:10 [Auto]<o:p></o:p>
    Driving Strength Profile
    Driving Strength……………………….: 1333 for А and В<o:p></o:p>

    Motherboard Voltage Control
    CPU Vcore..................................: 1.22500V [Auto]
    CPU Termination..........................: 1.200V [Auto]
    CPU PLL....................................: 1.5V [Auto]
    CPU Reference............................: 0.76V [Auto]

    MCH/ICH
    MCH Core.................................: 1.100V [1,260V]
    MCH Reference...........................: 0.76V [Auto]
    MCH/DRAM Ref...........................: 0.75V [Auto]
    ICH I/O....................................: 1.5V [Auto]
    DRAM
    DRAM Voltage............................:1.5000V [1.500V]
    DRAM Termination......................:0.75V [Auto]
    Ch-A Data V Ref.........................:0.75V [Auto]
    Ch-B Data V Ref.........................:0.75V [Auto]
    Ch-A Address V Ref.....................:0.75V [Auto]
    Ch-A Address V Ref.....................:0.75V [Auto]<o:p></o:p>
    <o:p></o:p>
    SPD for this RAM<o:p></o:p>
    JEDEC1 457 6-6-6-18-24 1.5V<o:p></o:p>
    JEDEC2 533 7-7-7-20-27 1.5V<o:p></o:p>
    JEDEC3 610 8-9-9-23-31 1.5V<o:p></o:p>
    XMP1800 900 8-8-8-24-33 1.8V

    When save to CMOS-> reboot and after 3-5 sec (without loading Windows) PC restarts again with clearing all BIOS settings.<o:p></o:p>
    Please, give an advice how to start this RAM on 1333!!

  2. #2
    Join Date
    Oct 2008
    Posts
    15

    Default Re: EP45T-DS3 with Transcend TX1800KLU-2GK, 4x1 Gb

    Bump...
    Any solution!?

  3. #3
    Join Date
    Oct 2008
    Posts
    15

    Default Re: EP45T-DS3 with Transcend TX1800KLU-2GK, 4x1 Gb

    Attempt to start with
    MCH Frequency Latch.................: [333]
    System memory Multiplier................: [4.00B]
    Memory Frequency (MHz).........1066..: 1333
    DRAM Timing Selectable..................: [Manual]
    Standart Timing Control
    CAS Latency Time..........................: 7 [8]
    tRCD.........................................: 7 [8]
    tRP...........................................: 7 [8]
    tRAS.........................................: 20 [24]
    Channel A
    Static tRead Value.........................:7 [11]
    ....без изменений
    Channel B
    Static tRead Value........................: 7 [11]
    ....без изменений
    DRAM Voltage............................:1.5000V [Auto]
    failed. Passing POST machine just froze before loading Win. Changing Static tRead Value to 8, 9 gave no results.

  4. #4
    Join Date
    Oct 2008
    Posts
    15

    Default Re: EP45T-DS3 with Transcend TX1800KLU-2GK, 4x1 Gb

    Well. After loading Optimized Defaults I was able to start cpu at 2.5 (333). I confused why it was problem before to start with these settings. Changing multi to 4B ram started at 1333. Now I trying to oc up to FSB 400.
    Last edited by Yevgen; 06-07-2009 at 04:45 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •