Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: EP45-UDP3 Assistance




  1. #1
    Join Date
    Jun 2009
    Posts
    3

    Default EP45-UDP3 Assistance

    Hello all,

    I recently built a new rig and it was my first time building a computer. Hardware seems to be fine, but I didn't know how to do BIOS settings.

    Motherboard: EP45-UDP3

    CPU: Intel Core 2 Duo 8400

    Processor 1 (ID = 0)
    Number of cores 2 (max 2)
    Number of threads 2 (max 2)
    Name Intel Core 2 Duo E8400
    Codename Wolfdale
    Specification Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
    Package Socket 775 LGA (platform ID = 0h)
    CPUID 6.7.A
    Extended CPUID 6.17
    Core Stepping E0
    Technology 45 nm
    Core Speed 2999.7 MHz (9.0 x 333.3 MHz)
    Rated Bus speed 1333.2 MHz
    Stock frequency 3000 MHz
    Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
    L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
    FID/VID Control yes
    FID range 6.0x - 9.0x
    max VID 1.250 V
    Features XD, VT


    Memory: G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 900(PC2 7200) Dual Channel Kit Desktop Memory

    Memory SPD
    ------------------------------------------------------------------------------
    DIMM #1
    General
    Memory type DDR2
    Module format Regular UDIMM
    Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
    Size 2048 MBytes
    Max bandwidth PC2-6400 (400 MHz)
    Part number F2-7200CL4-2GBPI-B
    Attributes
    Number of banks 2
    Data width 64 bits
    Correction None
    Nominal Voltage 1.80 Volts
    EPP yes (1 profiles)
    XMP no
    Timings table
    Frequency (MHz) 200 266 400
    CAS# 3.0 4.0 5.0
    RAS# to CAS# delay 3 4 5
    RAS# Precharge 3 4 5
    TRAS 8 10 15
    TRC 12 16 23
    EPP profile 1 (full)
    Voltage level 2.100 Volts
    Address Command Rate 2T
    Cycle time 2.200 ns (454.5 MHz)
    tCL 4.0 clocks
    tRCD 4 clocks (8.50 ns)
    tRP 4 clocks (8.50 ns)
    tRAS 12 clocks (26.00 ns)
    tRC 41 clocks (90.00 ns)
    tWR 11 clocks (24.00 ns)

    DIMM #2
    General
    Memory type DDR2
    Module format Regular UDIMM
    Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
    Size 2048 MBytes
    Max bandwidth PC2-6400 (400 MHz)
    Part number F2-7200CL4-2GBPI-B
    Attributes
    Number of banks 2
    Data width 64 bits
    Correction None
    Nominal Voltage 1.80 Volts
    EPP yes (1 profiles)
    XMP no
    Timings table
    Frequency (MHz) 200 266 400
    CAS# 3.0 4.0 5.0
    RAS# to CAS# delay 3 4 5
    RAS# Precharge 3 4 5
    TRAS 8 10 15
    TRC 12 16 23
    EPP profile 1 (full)
    Voltage level 2.100 Volts
    Address Command Rate 2T
    Cycle time 2.200 ns (454.5 MHz)
    tCL 4.0 clocks
    tRCD 4 clocks (8.50 ns)
    tRP 4 clocks (8.50 ns)
    tRAS 12 clocks (26.00 ns)
    tRC 41 clocks (90.00 ns)
    tWR 11 clocks (24.00 ns)


    The MEMORY speed should be:

    <TABLE class=specification cellSpacing=0 cellPadding=0><TBODY><TR><TD class=name>Capacity</TD><TD class=desc>4GB (2 x 2GB)</TD></TR><TR><TD class=name>Speed</TD><TD class=desc>DDR2 900(PC2 7200)</TD></TR><TR><TD class=name>Cas Latency</TD><TD class=desc>4</TD></TR><TR><TD class=name>Timing</TD><TD class=desc>4-4-4-12</TD></TR><TR><TD class=name>Voltage</TD><TD class=desc>2.0V - 2.1V</TD></TR></TBODY></TABLE>


    I do not know how to do this. When I intially booted, I accepted the auto configures. It booted fine and runs fine except when I gaming. When gaming I will get random BSOD's.

    Thanks for any help and if you need more informatiom, I'll gladly provide it.

  2. #2
    Join Date
    Jun 2009
    Posts
    7

    Default Re: EP45-UDP3 Assistance

    what's your graphics card model?

  3. #3

    Default Re: EP45-UDP3 Assistance

    These settings should be fine for a default setup (Assuming you don't have a floppy installed), can customise from there on...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 3.00GHz( 333x9)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Disabled]
    x CPU Host Frequency(Mhz).............:   333
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 800
    DRAM Timing Selectable (SPD)..........: [Auto]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [4]
    x tRCD ...........................5...: [   4]
    x tRP.............................5...: [   4]
    x tRAS...........................18...: [  12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: Auto
    x tWTR............................3...: Auto
    x tWR.............................6...: Auto
    x tRFC...........................52...: Auto
    x tRTP............................3...: Auto
    x Command Rate (CMD) .............0...: Auto
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..............8...: Auto
    x tRD Phase0 Adjustment...........1...: Auto
    x tRD Phase1 Adjustment...........1...: Auto
    x tRD Phase2 Adjustment ..........1...: Auto
    x tRD Phase3 Adjustment...........1...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..............8...: Auto
    x tRD Phase0 Adjustment...........1...: Auto
    x tRD Phase1 Adjustment...........1...: Auto
    x tRD Phase2 Adjustment ..........1...: Auto
    x tRD Phase3 Adjustment...........1...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.27500V]
    CPU Termination........1.200V.........: [1.200V]
    CPU PLL................1.500V.........: [1.500V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.100V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.100V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.000V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  4. #4
    Join Date
    Jun 2009
    Posts
    3

    Default Re: EP45-UDP3 Assistance

    Quote Originally Posted by hoganrock View Post
    what's your graphics card model?

    Sapphire HD 4850

  5. #5
    Join Date
    Jun 2009
    Posts
    3

    Default Re: EP45-UDP3 Assistance

    OK I set those settings except I don't know how to do this part.

    x CAS Latency Time................5...: [4]
    x tRCD ...........................5...: [ 4]
    x tRP.............................5...: [ 4]
    x tRAS...........................18...: [ 12]


    Mine currently looks like this:

    x CAS Latency Time................4...: [4]
    x tRCD ...........................4...: [ 4]
    x tRP.............................4...: [ 4]
    x tRAS...........................11...: [ 12]

  6. #6

    Default Re: EP45-UDP3 Assistance

    Don't worry about the numbers on the left.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •