Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39

Thread: Picked up another UD3P and an E8400




  1. #11
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Picked up another UD3P and an E8400

    Temps are max 61c with case temps at 27c. I was a little rushed in applying the TIM so I suspect the TRUE isn't making the best contact with the heat spreader. Truth is I did a half-ass job of the TIM this time around. .

    Yeah, the only reason I am still using win2K on this work computer is that there are some proprietary software on it and I don't want to purchase another install if I were to do a clean install with a more up to date OS. I know it isn't the best way to do it, but I just imaged the hd from the old rdx200 board and migrated it to the ud3p and updated necessary drivers. Couldn't do a repair re-install because it reboots. I suspect it is because the original win2K disk is old. I might try it again after I get my my OC fill and create another install disk and slip stream sp-4 on it.

    I have the win7 rc on another box and it isn't too bad. I tried to do an update with win7rc on this computer just for $hits and giggles but it didn't work. I didn't want to do a clean install of win7rc when it only will last till March with the work computer because of other software reinstall costs. When the official release of win 7 arrives this fall, I probably will do a clean install with this computer and have to eat the cost of reinstalling some other proprietary software which I was trying to avoid
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  2. #12
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Picked up another UD3P and an E8400

    Phase 1 passed 24hr blend prime. 445 x 9 @ vcore 1.2375v bios.




    Will move on to phase 2, 500x8.5
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  3. #13
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Picked up another UD3P and an E8400

    sorry forgot the et6 image.

    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  4. #14
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Picked up another UD3P and an E8400

    I'd lower MCH ref to 0.740-0.720 now rather than have a failiure and need to adjust it later. Other than that, it's looking nice.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  5. #15

    Default Re: Picked up another UD3P and an E8400

    Holy cow... 1.2375v!!! Man did I get the unlucky draw on chips... I think I had to go 1.35v to get stable....

    Good Job Boombastic
    Quote Originally Posted by Alex St. John
    Consider for a moment that what we think of as “intelligence” is the byproduct of a computing architecture that depends on massive parallelism to interact with the world in real time without stalling for progress bars. If our ancestors’ brains had depended on running Vista on current dual-core processors for their survival, they would have been eaten by bears.

    Best Quote Ever...
    Quote Originally Posted by Psycho101
    Obey the one and only rule without question when you overclock.... don't cause a fire. Fires are hot and burny... not good.
    Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066

  6. #16
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Picked up another UD3P and an E8400

    Psycho: I certainly won't object to lowering voltages because that is what I will ultimately do anyway, but the 445x9 bios settings was just a stepping stone. Kept everything loose as a goose just to move on to the next phase.

    Grishka: Yeah, I was pleasantly surprised. I originally wanted to try one step lower even, but then I figured after vdroop, I would already below my vid, so left it at 1.2375v.

    Currently, priming with 1.2625v bios at 500x8.5. Hope it works out.
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  7. #17
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Picked up another UD3P and an E8400

    Aye, I understand. The suggestion to lower MCH ref was a stability thing. I don't know of anyone running a Dual Core that is stable at the default MCH Ref over 4-4.2GHz, and lowering it doesn't hinder stock stability. Thought lowering it to 0.740 now might save you the hassle of getting a prime failure, then having to do it. MCH ref is purely a stability thing as it likely won't boot at dangerously high levels, and doesn't contribute towards heat.

    I'd be willing to bet you'd be stable at stock speeds with 1.0V or less. Seems you have a perfect overclocker. I kinda want to buy an E8xxx myself now, but knowing my luck I'll get a Huge VID, a C1 or both.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  8. #18
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Picked up another UD3P and an E8400

    I certainly will keep that in mind as I tinker with it, as your words of wisdom are always appreciated. Much thanks.
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  9. #19

    Default Re: Picked up another UD3P and an E8400

    but knowing my luck I'll get a Huge VID
    ME....apparently.
    Quote Originally Posted by Alex St. John
    Consider for a moment that what we think of as “intelligence” is the byproduct of a computing architecture that depends on massive parallelism to interact with the world in real time without stalling for progress bars. If our ancestors’ brains had depended on running Vista on current dual-core processors for their survival, they would have been eaten by bears.

    Best Quote Ever...
    Quote Originally Posted by Psycho101
    Obey the one and only rule without question when you overclock.... don't cause a fire. Fires are hot and burny... not good.
    Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066

  10. #20
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Picked up another UD3P and an E8400

    Me too with my E7400. Loads of people around with ones that have VIDs as low as 1.135V, and I get one with 1.2625V.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •