Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: need help to OC E8500 on EP45-EXTREME




  1. #1
    Join Date
    Dec 2008
    Posts
    16

    Post need help to OC E8500 on EP45-EXTREME pls...

    hi...can anyone help me to oc my E8500 to 4.5GHz?I'm running at 4.3Ghz nw(453x9.5)but I wish to push it more higher...=)I can get into window with 4.5GHz (473x9.5) but my pc restart 2hrs later when I run the ORTHOS..
    my pc spec:
    E8500 + EP45-EXTREME
    OCZ FLEX II 4gb (2x2Gb) DDR2-1150
    Coolermaster Aquagate Max cooling
    Cosmos S case
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound card
    Sapphire HD4850 512MB 256-Bit GDDR3 Graphic card on crossfire
    480GB Harddisk
    Corsair HX620W PSU

    my current bios setting is below:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..................: [Fast]
    CPU Clock Ratio ..............................: 9
    Fine CPU Clock Ratio.........................: 0.5 Frequency ...............................: 4.73Ghz (473 FSB x 9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...................: [Enabled]
    CPU Host Frequency (Mhz) .............: [473]
    PCI Express Frequency (Mhz) ..........: [100]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: auto
    MCH Clock Skew (ps)....................: auto


    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: Disabled
    (G)MCH Frequency Latch.................: [400]
    System Memory Multiplier ..............: [2.00D]
    Memory Frequency (Mhz) ................: [946]
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time..........................:5
    tRCD ...........................................:5
    tRP'.............................................: 5
    tRAS............................................:1 5

    Advanced Timing Control
    tRRD............................................:4
    tWTR.......................................... :6
    tWR.............................................:8
    tRFC............................................:6 4

    tRTP...........................................:5
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................12
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:12
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Driving Strenght Profile 1066 MHZ
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.30v (default 1.15v)
    CPU Termination…..... 1.200V*.......: 1.32
    CPU PLL…………………....1.500V*.......: 1.58
    CPU Referen.…………....0.755V*.......: <<< Auto
    CPU Reference2………,,0.800V*.......:<<< Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.28
    MCH Reference….…….0.800V...........; << Auto
    MCH/DRAM Ref.…......0.900V...........: << Auto
    ICH I/O……………….....1.550V............: << Auto
    ICH Core…………...……1.100V............: 1.24

    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: 1.0
    Channel A Reference 0.900V............: 1.0
    Channel B Reference 0.900V............: 1.0

    Advanced Settings
    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: disabled
    CPU Enhanced Halt (C1E)................: disabled
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: disabled
    Virtualization Technology................: enabled


    pls let me know if need to change anything...thx...
    very appreciated...
    Last edited by tIm0210; 06-11-2009 at 01:50 PM. Reason: because no one reply n help me...=(

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •