Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: X58-ud5, ocz 1600 & corei7 920




  1. #1
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    25

    Default X58-ud5, ocz 1600 & corei7 920

    This was my original topic without answers:

    -----------------------------------------------------------------------------------
    "Well, as it is described below I assembled everything and started to test my new pc and as I am not that familiar with this kind of chip I decided to ask for some help and then I found this forum. My main problem is that my pc is not stable as yours, @ default too.
    Intel burn test indicates that my system is stable, but only if I launch the standard test. If I try to test it using max memory available or 4096Mb it locks up during the third cycle, telling me that the results are inaccurate.
    I tried those things but nothing happens:

    -flash bios using the latest beta version, load optimal settings, launch windows 7 x64, launch ibt max ram… error

    -flash bios using latest stable version, load optimal settings, launch windows 7 x64, launch ibt max ram… error

    -flash bios using extreme bios, load optimal settings, launch windows 7 x64, launch ibt max ram… error

    -set ram @ 8-8-8-24-1T / 1.66V / 1600MHz, launch windows 7 x64, launch ibt max ram… error

    -set ram @ 9-9-9-30-2T / 1.66V / 1600MHz, launch windows 7 x64, launch ibt max ram… error

    -set ram @ 9-9-9-30-2T / 1.66V / 1066MHz, launch windows 7 x64, launch ibt max ram… error

    -set ram @ 9-9-9-30-2T / 1.66V / 1066MHz, cpu 1.40V, qpi 1.40V, launch ibt max ram… error

    using Vista x64: same problem
    no overheating here
    Cpu? Mobo? Ram? Me?
    "
    -----------------------------------------------------------------------------------

    The same day I did this things:
    - use only one memory stick and launch ibt max ram... ok
    - change memory stick and relaunch ibt max ram... ok
    - ...
    - put two memory sticks and launch ibt max ram... ok
    - put all three memory sticks and launch ibt max ram... ok

    I used Extreme bios, but now my UD5 is on UD5 bios and the same thing re-happen

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  3200 (3333 is the same)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [Auto]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 24
    CR .......................................... 1N
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... [Auto]
    QPI/VTT Voltage............ [Auto]
    CPU PLL  ....................... [Auto]
    
    MCH/ICH
    PCIE  ........................... [Auto]
    QPI PLL  ....................... [Auto]
    IOH Core ..................... [Auto]
    ICH I/O  ....................... [Auto]
    ICH Core ........................ [Auto]
    
    DRAM
    DRAM Voltage  .............. 1.66V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by gasse; 07-17-2009 at 06:56 PM.
    Home: Corei7 920 C0 watercooled, Gigabyte X58A-UD??, 3x2Gb OCZ GOLD 1600 DDR3 (OCZ3G1600LV6GK), 2xHdd WD 250Gb RE3 raid0, 1xHdd WD 1Tb Caviar Green, Pioneer DVR-216D, Gainward 4870 1Gb GS, Enermax Liberty 620W, monitor CRT Hyundai 19" Q910, case Antec Skeleton, keyboard Logitech G15, mouse Logitech G9
    Car: Sempron2600+, Asrock K8NF6G-VSTA, 1x512Mb DDR Geil, 1xHdd Maxtor Momentus 320Gb, Pioneer DVR-110D, M4-ATX, monitor touch screen 7" lcd Panasonic

  2. #2
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    25

    Default Re: X58-ud5, ocz 1600 & corei7 920

    A bump for me.
    Home: Corei7 920 C0 watercooled, Gigabyte X58A-UD??, 3x2Gb OCZ GOLD 1600 DDR3 (OCZ3G1600LV6GK), 2xHdd WD 250Gb RE3 raid0, 1xHdd WD 1Tb Caviar Green, Pioneer DVR-216D, Gainward 4870 1Gb GS, Enermax Liberty 620W, monitor CRT Hyundai 19" Q910, case Antec Skeleton, keyboard Logitech G15, mouse Logitech G9
    Car: Sempron2600+, Asrock K8NF6G-VSTA, 1x512Mb DDR Geil, 1xHdd Maxtor Momentus 320Gb, Pioneer DVR-110D, M4-ATX, monitor touch screen 7" lcd Panasonic

  3. #3

    Default Re: X58-ud5, ocz 1600 & corei7 920

    are you sure you are choosing "16 Threads" in IBT? leaving it @ Auto will give you error

  4. #4
    Join Date
    Feb 2009
    Posts
    77

    Default Re: X58-ud5, ocz 1600 & corei7 920

    Hi. Try setting yout qpi/vtt on the first mit screen from auto to 1.20

  5. #5
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    25

    Default Re: X58-ud5, ocz 1600 & corei7 920

    Quote Originally Posted by aquax View Post
    are you sure you are choosing "16 Threads" in IBT? leaving it @ Auto will give you error
    8 threads (4 phisical cores + 4 virtual cores)

    Quote Originally Posted by killersjp View Post
    Hi. Try setting yout qpi/vtt on the first mit screen from auto to 1.20
    autoquoting me

    Quote Originally Posted by gasse from Gigabyte Latest BIOS topic:
    @default is not stable testing using maximum stress <nobr style="font-weight: normal; font-size: 100%;" id="itxt_nobr_15_0">test</nobr> on Intel burn test (I don't know if it's stable using standard test EDIT:on standard test it's ok). I receive a warning on the second test session:
    "Your system was found to be unstable... check cooling... lower overclock". Is it a memory related issue? Cooling is ok (liquid@acceptable temp) and no overclock. I tried to overvolt ram, increase ram timings, increase QPI/VTT (1.5V), no go.
    I'll try using 1.2V but I thing it's a bit lower than needed. On auto it's at 1.42V (EasyTune say this).

    EDIT

    QPI/VTT : 1.20V = no boot
    Last edited by gasse; 07-18-2009 at 03:59 PM.
    Home: Corei7 920 C0 watercooled, Gigabyte X58A-UD??, 3x2Gb OCZ GOLD 1600 DDR3 (OCZ3G1600LV6GK), 2xHdd WD 250Gb RE3 raid0, 1xHdd WD 1Tb Caviar Green, Pioneer DVR-216D, Gainward 4870 1Gb GS, Enermax Liberty 620W, monitor CRT Hyundai 19" Q910, case Antec Skeleton, keyboard Logitech G15, mouse Logitech G9
    Car: Sempron2600+, Asrock K8NF6G-VSTA, 1x512Mb DDR Geil, 1xHdd Maxtor Momentus 320Gb, Pioneer DVR-110D, M4-ATX, monitor touch screen 7" lcd Panasonic

  6. #6
    Join Date
    Feb 2009
    Posts
    77

    Default Re: X58-ud5, ocz 1600 & corei7 920

    Here are my settings for ud5 3gb corsair dominator (1600) but running at 1520, i920 co at 3.8 Ghz, with a noctura heatsink: bios at optimised values with these alterations, QPi link speed x36, unicore freq x16, bclk control enabled, bclk freq= 190, performance=turbo xmp=disabled, sys memory multiplyer=8=1520mhz, dramtiming=set your memory config for you ocz, load line calibration= enabled, cpu vcore=1.2875, qpi/vtt=1.28 ioh=auto, dram=1.66. I know memory is at 1520 and not 1600 but you would not notice difference. You would need a better heatsink than the one provided with the cpu to have coll temperature, with the noctura my overclocked temps are cooler than running at 2.6. Hope this helps. Ps the system is stable with these settings.
    Last edited by killersjp; 07-18-2009 at 04:35 PM.

  7. #7

    Default Re: X58-ud5, ocz 1600 & corei7 920

    @gasse
    IBT is bugged if you don't use "16 Threads" with i7 processor or just use LinX instead

  8. #8
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    25

    Default Re: X58-ud5, ocz 1600 & corei7 920

    It seems to work running 16 threads (I'll try on the next days other tests).
    Thanks man
    Home: Corei7 920 C0 watercooled, Gigabyte X58A-UD??, 3x2Gb OCZ GOLD 1600 DDR3 (OCZ3G1600LV6GK), 2xHdd WD 250Gb RE3 raid0, 1xHdd WD 1Tb Caviar Green, Pioneer DVR-216D, Gainward 4870 1Gb GS, Enermax Liberty 620W, monitor CRT Hyundai 19" Q910, case Antec Skeleton, keyboard Logitech G15, mouse Logitech G9
    Car: Sempron2600+, Asrock K8NF6G-VSTA, 1x512Mb DDR Geil, 1xHdd Maxtor Momentus 320Gb, Pioneer DVR-110D, M4-ATX, monitor touch screen 7" lcd Panasonic

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •