Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: DDR3 1600 on GA-EP45T-UD3LR




  1. #1
    Join Date
    Jun 2009
    Posts
    2

    Default DDR3 1600 on GA-EP45T-UD3LR

    I have been able to get a 4 GB OCZ DDR3 1600 kit (OCZ3RPR16004GK) to pass memtest in dual channel with the following settings:

    FSB: 400 (Multipler 8)
    PCI-E: Auto
    Performance Enhance: Standard
    G(MCH) Freq: 400
    Mem Multiplier: 3.33D (1333 Mhz)
    CAS: 7
    tRCD: 7
    tRP:7
    tRAS: 24
    tRFC: 60
    Vcore: Auto
    DRAM: 1.7v

    However, going beyond this starts failing memtest, no matter what settings I play vith (dram voltage, MCH voltage, etc). Specifically, nothing I do seems to make the memory stable using the 4.00D multiplier (for 1600 Mhz). However, I have been able to get the memory up to 1460 stable by leaving everything as is and taking the CPU FSB up to 438, but I can't get the same memory speed stable using the 4.00D divider.

    I can run at 1600 (4.00D) with 1.9v and 8-8-8-26 timings in single channel mode with 4 GB's, but I still can't get it to dual channel stablely at 1600. Any ideas?<!-- / message --><!-- edit note -->

  2. #2
    Join Date
    Jun 2009
    Posts
    2

    Default Re: DDR3 1600 on GA-EP45T-UD3LR

    Anyone?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •