Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: UD4P boot problem?




  1. #1

    Default X58-UD4P boot problem?

    is that a normal behavior? only happen after shutdown and power on

    when I power on my PC, I could hear like 3 resets happen (the blue led behind the ram which show your OC level turn off and on like 3 times) it doesn't shutdown and power on again, it just doing like 3 reset in the row without any shutdown, I entered the bios after, but it doesn't say anything about reverting from bad OC, and every stress test passed fine.

    I found this info in other site:
    FYI, something that Munch pointed out to me is that the Gigabyte MB "double boots" when it is overclocked. I looked and sure enough mine does it too. When you first hit the on button the system does a quick on, off, and then on again cycle. Adds ~5 seconds to the boot time. It hadn't really connected with me until Munch mentioned it and I intend to see if the latest BIOS fix stops the behavior. Machine runs great otherwise.


    EX58-UD4P F8
    i7 920 @ 3.82
    Corsair 6GB 1600
    Last edited by aquax; 06-16-2009 at 06:00 PM.

  2. #2

    Default Re: X58-UD4P boot problem?

    Cold booting is definitely slow on the X58 boards for some reason. Not sure if its really a problem or just an annoyance. It was mentioned earlier in this thread: http://forums.tweaktown.com/f69/mino...d4p-x58-32558/
    i7 920 C0/C1 3841A
    24/7 OC: 21x183Mhz = 3.84Ghz @ stock Vcore/QPI voltages
    Thermalright Ultra-120 Extreme 1366
    3x2GB OCZ DDR1600 OCZ3P1600LV6GK
    EX58-UD4P BIOS F11
    EVGA GTX 260 Core 216 SC 55nm 896-P3-1257-AR
    Antec NEO HE 550 Power Supply

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •