Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 69

Thread: Q9400 and EP45-UD3R OC Settings




  1. #31
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: Q9400 and EP45-UD3R OC Settings

    Thx lsdmeasap :) later i will try to test with tRFC 52 (in forum xtremesystems they advice to set tRFC value at 52 just like u said lsdmeasap, i think this is right)
    o yea should i test with IBT again? i think if my procie is stabil then i just need test myram with memtest....am i correct lsdmeasap??? plz enlighten me ^_^ and last do you think my psu is not enough for my rig?? and is it ok set driving strength to OC-1200 with 1080mhz? do you have basic for setting driving strength?? i mean if i raise myram to 1150mhz then i must set driving strength to OC-1200.... correct me plz :)
    note: iam sorry to many questions for newbie like me.
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9400 and EP45-UD3R OC Settings

    Yeah with 4GB 52-62 is normally easy to use @ 800-10xxMhz.

    I would test the memory first, then if all is good run IBT

    PSU is probably fine, I don't know much about Nvidia cards, but if you think it is good enough for your cards and everything is running fine than I am sure it is probably ok.

    Yes, I always use Driving strength one step above ram speed, so 1200 for 10xx is fine to use as long as it is stable for you.

  3. #33
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: Q9400 and EP45-UD3R OC Settings

    Thx "guru' lsdmeasap :) i like this forum, its really helpfully me. btw whre is scaby?? does he manage to reach 4ghz? hehehe i wonder.... ^_^
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #35
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: Q9400 and EP45-UD3R OC Settings

    Scaby is the who started this thread... just check in page 1 :) i got to off now thx again lsdmeasap.
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

  6. #36
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9400 and EP45-UD3R OC Settings

    Ahh ok, I got ya now!

    Sorry, I thought maybe you meant some other thread.

    Good luck tweaking and testing, see ya soon

  7. #37
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: Q9400 and EP45-UD3R OC Settings

    Hai Lsdmeasap :) its me again...
    sorry i often online but still keep contact with this forum, i tried settings from Kick and its awesome works only not yet stabil, for FSB 500MHz i use :
    Vcore : 1,4625v
    VTT : 1,36v
    PLL : 1,5v
    MCH : 1,32v
    This is the lowest volts in bios, if i change lower i step any of those setting then become unstabil (freeze/hang/bsod) ... i know those volts must be added afew step to reach stabil....but thx again to kick from his setting i manage to desktop with no error with those setting above BUT only when i change "MCH clock skew drive to 50ps" if i let that setting default (MCH clock skew drive---0ps) it freezes in loading screen, never manage to desktop even though i raise all volts especially vcore to 1,5volt...... this is interesting, only change mch clock skew drive to 50ps i can boot to desktop with no error :) but unfortunately my RAM is really bad ... i use setting for myram : 1000mhz, 2.00D, 400mhz latch, vdimm=2 - 2,1volt.
    If i change tRD to 9 as u guys advice, it freeze or bsod, cannot pass loading screen.... so i leave that setting auto.
    I tried superpi 1M and it works with no error.... my problem is my ram i guess :( i even tried to test how high myram with 3,6ghz it only achieved 1118mhz, tried 1150mhz always gives errors in Memtest..... i look again in mymobo compability ram, yup there is no list of my ram :( before this i used to have ram corsair xms2 ddr2 800mhz and it can achieve 950mhz with no error in memtest.
    Do you guys have any suggest or advice for me? :) i'm listening.
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

  8. #38
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9400 and EP45-UD3R OC Settings

    MCH Skew is ok at 50 is you need to use it.

    You can check your tRD to see what auto is giving you with memset, it's called performance level in memset
    Tweakers.fr

  9. #39
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: Q9400 and EP45-UD3R OC Settings

    Ok lsdmeasap i will take alook at my tRD with that tool, btw if i set tRFC 52 memtest gave error then i set to tRFC 58 memtest is ok :) i think i choose tRFC 58 rather than auto (tRFC 70).
    Sorry i cannot report now but afew days, because i dont use internet in myhome ^_^ but in other places like cyber cafe but more compact hehehe.
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

  10. #40
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9400 and EP45-UD3R OC Settings

    Then 52 might be too low, try 53-58 and see what the lowest one you can use is.

    It's cool, update when you can and enjoy your system in the meantime!

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •