Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: EP45-UD3R Memory Issues




  1. #1
    Join Date
    Jun 2009
    Posts
    1

    Default EP45-UD3R Memory Issues

    I have gotten the new board and imported the 4 sticks of 1 ghz 667 mhz i had in my old rig over.

    However, it is only able to run on slot 1 and 2. I inserted 4 slots and the system won't start. Thereafter i change over to slot 1 and 3 and it fail to load too.

    The rams are all working i can confirm that. Is there any options i need to turn on before it detects and utilize slot 3 and 4?

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3R Memory Issues

    Follow the suggestions in this post for basic bios settings, making sure that you first load optimized defaults.

    We need more info about your hardware. Follow the instructions below the bios settings for adding your hardware list to your forum signature.
    This will help eliminate errors. Be sure to include a link to your memory's specifications.

    With 4x1GB of 667MHz memory, MCH Core voltage should work with Auto, 1.05, or 1.16 settings.

    Post your current bios settings using this generic bios template:
    Code:
    Motherboard: Model:   Rev#:   Bios version:
    Cpu: Model
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Brand, Model#, Wattage
    ============
    Default settings for new setups that are not overclocked.
    
    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto] <--- FAST is OK
    CPU Clock Ratio ---------------------- : [##]
    Fine CPU Clock Ratio ----------------- : [0.0] < ignore if not available
    CPU Frequency ---------------------: ####
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [Mhz]
    PCI Express Frequency (Mhz) ---------- : [Auto] <--- Set to 100, never leave this on Auto
    
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    
    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo] <--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [Auto]
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking
    
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [Auto]
    tRCD  ------------------- ?? ---------- : [Auto]
    tRP --------------------- ?? ---------- : [Auto]
    tRAS  ------------------- ?? ---------- : [Auto]
    
    Advanced Timing Control
    tRRD  ------------------- ?? ---------- : [Auto]
    tWTR  ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC  ------------------- ?? ---------- : [Auto]
    tRTP  ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
    
    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
    
    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
    
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.?????  ---- : [Auto] <--- set to the 1.????? value
    
    CPU Termination --------- 1.200V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU PLL ----------------- 1.500V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    
    CPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    CPU Reference2 ---------- 0.800V* ----- : [Auto] <--- Auto Will set this correctly
    
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto] <--- set to 1.20 for 2x2GB ram (1.24 - 1.26, or 1.05 might be needed)
    MCH Reference ----------- 0.800V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [Auto] <--- set to the value to the left
    ICH Core ---------------- 1.100V ------- : [Auto] <--- set to the value to the left
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto] <--- set to the max rated ram voltage (for most memory)
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled] <--- Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect  ------------- : [Enabled] <--- set to Disabled when overclocking (this must be enabled to flash or boot from a USB drive)
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •