Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: Help: set OCZ reaper to 1066 with EP45-UD3R




  1. #1
    Join Date
    Jun 2009
    Posts
    5

    Default Help: set OCZ reaper to 1066 with EP45-UD3R

    I've purchased some OCZ reaper 8500 2*1 GB

    but i can't get them to work at 1066mhz as stock

    these are CPUz results

    DRAM voltage is set to: 2.1
    timmings are not set


  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    We need the following information to help you:
    1) List your system components in your signature.
    --> User CP tab (upper left corner of web page)
    --> select Edit Signature
    --> preview
    --> Save when complete
    --> Bios version
    2) Link to your ram's full specifications.
    3) Fill in the generic bios template with your bios settings and post your current settings.
    --> Fill in Auto where appropriate.

    Code:
    Motherboard: Model:  Rev#:  Bios Version:
    Cpu: Model
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Brand, Model#, Wattage
    
    Default settings for new setups that are not overclocked.
    
    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto] <--- FAST is OK
    CPU Clock Ratio ---------------------- : [##]
    Fine CPU Clock Ratio ----------------- : [0.0] < ignore if not available
    CPU Frequency ---------------------: ####
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [Mhz]
    PCI Express Frequency (Mhz) ---------- : [Auto] <--- Set to 100, never leave this on Auto
    
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    
    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo] <--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [Auto]
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking
    
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [Auto]
    tRCD  ------------------- ?? ---------- : [Auto]
    tRP --------------------- ?? ---------- : [Auto]
    tRAS  ------------------- ?? ---------- : [Auto]
    
    Advanced Timing Control
    tRRD  ------------------- ?? ---------- : [Auto]
    tWTR  ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC  ------------------- ?? ---------- : [Auto]
    tRTP  ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
    
    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
    
    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
    
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.?????  ---- : [Auto] <--- set to the 1.????? value
    
    CPU Termination --------- 1.200V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU PLL ----------------- 1.500V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    
    CPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    CPU Reference2 ---------- 0.800V* ----- : [Auto] <--- Auto Will set this correctly
    
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto] <--- set to 1.20 for 2x2GB ram (1.24 - 1.26, or 1.05 might be needed)
    MCH Reference ----------- 0.800V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [Auto] <--- set to the value to the left
    ICH Core ---------------- 1.100V ------- : [Auto] <--- set to the value to the left
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto] <--- set to the max rated ram voltage (for most memory)
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled] <--- Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect  ------------- : [Enabled] <--- set to Disabled when overclocking (this must be enabled to flash or boot from a USB drive)
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    Join Date
    Jun 2009
    Posts
    5

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    I've updated my signature

    those are ram specifications!
    OCZ Technology | Products | Memory | OCZ DDR2 PC2-8500 Reaper HPC Edition

    I don't want to overclock CPU this time, just to set RAM to 1060 Mhz
    MoBo: Gigabyte EP45-UD3R (rev 1.1-bios f9)
    CPU: e8400 @ 3.0
    RAM: OCZ REAPER 8500
    HDD: Hitachi 320gb
    GPU: xfx gtx 275
    PSU: CM 550w
    Case: HP Virtus

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    Here is stock settings for your hardware w/ ram at 1066

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................38-42
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................1066
    
    Channel A
    Static tRead Value.........................:6-10
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6-10
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1V
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #5
    Join Date
    Jun 2009
    Posts
    5

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    I still having the same results with these values
    MoBo: Gigabyte EP45-UD3R (rev 1.1-bios f9)
    CPU: e8400 @ 3.0
    RAM: OCZ REAPER 8500
    HDD: Hitachi 320gb
    GPU: xfx gtx 275
    PSU: CM 550w
    Case: HP Virtus

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    Quote Originally Posted by Vercetti View Post
    I still having the same results with these values
    What are the results exactly?
    The first picture you posted is the specs and SPD values of your RAM what do you see in the Memory tab?

  7. #7
    Join Date
    Jun 2009
    Posts
    5

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    tab memory:

    DDR2: dual channel
    2048 Mbytes
    DC MODE: Symmetric

    Dram Frequency (533.3 Mhz)
    FSB:DRAM 5:8
    CL: 5 clocks
    tRCD: 5 clocks
    tRP: 5 clocks
    tRAS: 15 clocks
    CR: 2T
    MoBo: Gigabyte EP45-UD3R (rev 1.1-bios f9)
    CPU: e8400 @ 3.0
    RAM: OCZ REAPER 8500
    HDD: Hitachi 320gb
    GPU: xfx gtx 275
    PSU: CM 550w
    Case: HP Virtus

  8. #8
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Help: set OCZ reaper to 1066 with EP45-UD3R

    If you're not experiencing any stability issues, then everything is fine. You do not have 1066MHz RAM. There's no such thing. You have DDR-1066 RAM. DDR RAM of this spec runs at 533MHz. DDR means it's able to transfer data twice per clock cycle, hence its 1066 rating (533*2 = 1066).
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •