Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: help needed on meory timing




  1. #11
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    i tryed what you said i can boot to windows but when i run orthos it stoppes

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 401Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66d
    Memory Frequency (Mhz) ........800....1069
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: 3-auto
    tWTR...................................: 3-auto
    tWR....................................: 6-auto
    tRFC...................................: 52-auto
    tRTP...................................: 3-auto
    Command Rate (CMD) ....................: 0-auto

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.30000V.......: 1.30000V
    CPU Termination.........1.200V.........: 1.240V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.220V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V

    DRAM
    DRAM Voltage............1.800V.........: 2.200V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: help needed on meory timing

    Try this and see how it goes. And can you please post an image of Memset so we can see if maybe one of those Auto settings are set to low for your memory.

    What BIOS are you using, and what do you see in the PC Health section for ram voltage when you set 2.2v after a reboot?

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 401Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66d
    Memory Frequency (Mhz) ........800....1069
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: 3-auto
    tWTR...................................: 3-auto << Set 4 (Leave on Auto for Memset Image)
    tWR....................................: 6-auto << Set 6-8 (Leave on Auto for Memset Image)
    tRFC...................................: 52-auto << Set 58
    tRTP...................................: 3-auto
    Command Rate (CMD) ....................: 0-auto << Set 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.30000V.......: 1.32500V
    CPU Termination.........1.200V.........: 1.280V
    CPU PLL.................1.500V.........: 1.540V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.240V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.550V
    ICH Core................1.100V.........: 1.140V

    DRAM
    DRAM Voltage............1.800V.........: 2.200V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

  3. #13
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    ok bios is f8

    when i goto pc health aftersetting ram voltage to 2.2 i see

    vcore 1.316v
    ddr18v 2.24v

    orthos ran this time for 7 seconds other times only 1 second

    heres memtest


  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: help needed on meory timing

    K, try setting tWR and tWTR yourself and see if it helps.

    If not, try less MCH like maybe less than stock (1.05) as sometimes this helps.

    Orthos failing that quick is most often incorrect CPU Voltages, you do have all your "Ref" voltages in Auto and not manually set correct? If not, set them all to Auto

    Your chip may just need more voltages than others, some are like that. Try more and see if orthos will run or not. Also go ahead and try 2.40B multi and see if that helps

  5. #15
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    tryed all you said most i can orthos to run is 32 seconds ive bumped vcore to 13500 all ref setting are on auto tryed 2.4b strap still no go

  6. #16
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    ok orthos got past 5 mins lol hope it lasts how cum my fan on full speed now

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: help needed on meory timing

    You may just need to adjust your MCH Ref, see the link in my signature on how to set this setting

  8. #18
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing


    hi this is my settings now seems ok but will test with orthos for 24 hrs just would like you to look over if anything is wrong cheers

    my fans running fast with these changes full speed noisy can anything be done

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 401Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66d
    Memory Frequency (Mhz) ........800....1069
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: 3-auto
    tWTR...................................: 3-auto
    tWR....................................: 6-auto
    Memset Image)
    tRFC...................................: 52-auto
    tRTP...................................: 3-auto
    Command Rate (CMD) ....................: 0-auto

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 9
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.30000V.......: 1.35000V
    CPU Termination.........1.200V.........: 1.280V
    CPU PLL.................1.500V.........: 1.540V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.000V-----under stock
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.540V
    ICH Core................1.100V.........: 1.140V

    DRAM
    DRAM Voltage............1.800V.........: 2.200V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]
    Last edited by peterg60; 06-29-2009 at 03:11 AM.

  9. #19
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    orthos stopped after 1hr gutted

  10. #20
    Join Date
    Jun 2009
    Posts
    23

    Default Re: help needed on meory timing

    just done a intelburn test on maxuium passed but orthos will still fail at 1 hr do you think more vcore is needed

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •