Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Sleep problems and I'm not talking nightmares




  1. #1
    Join Date
    Jun 2009
    Location
    TN, USA
    Posts
    135

    Default Sleep problems and I'm not talking nightmares

    At stock sleep works great however with the overclock below it will not go out of sleep. Using Vista 64 SP2 and the F8 BIOS that shipped with the ex58-ud4p. I have tested the setup below thoroughly, two 15 pass sessions with memtest+, 10 hours each with prime95 in blend and small-fft and 2 hours of intel burn test, no errors no freezing and no bsods. In the stress tests no core temps passed 68C according to realtemp.

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed ................................. x36/6.48 GHz
    Uncore Frequency ............................. x16/2880 MHz
    Isonchronous Frequency ..................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control .................. [Enabled]
    BCLK Frequency (MHz) ...................... [180]
    PCI Express Frequency (MHz) ............. [100]
    C.I.A.2 ........................................... [Disabled]

    Advanced Clock Control:
    CPU Clock Drive .............................. [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew .............................. [0ps]
    IOH Clock Skew .............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ..................... [Standard]
    System Memory Multiplier (SPD) ....... [8.0] = 1440 Mhz
    DRAM Timing Selectable (SPD) ......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time .......................... 9
    tRCD ............................................ 9
    tRP .............................................. 9
    tRAS ............................................ 24

    ##Channel A Advanced Timing Control##
    tRC ............................................. [AUTO: 27]
    tRRD ........................................... [AUTO: 4]
    tWTR .......................................... [AUTO: 4]
    tWR ............................................ [AUTO: 8]
    tRFC ........................................... [AUTO: 60]
    tRTP ........................................... [AUTO: 4]
    tFAW .......................................... [AUTO: 16]
    Command Rate (CMD) .................... [AUTO: 1]

    ##Channel A Misc Timing Control##
    Round Trip Latency ........................ [AUTO: 72]

    Advanced Voltage Control:

    Load Line Calibration ...................... [Disabled]
    CPU Vcore ................................... 1.25 Normal
    QPI/VTT Voltage 1.150v ................. 1.175 Normal
    CPU PLL 1.800v ............................. 1.800 Normal

    >>>MCH/ICH
    PCIE 1.500v ................................. Auto
    QPI PLL 1.100v ............................. Auto
    IOH Core 1.100v ........................... Normal
    ICH I/O 1.500v ............................. Auto
    ICH Core 1.1v ............................... 1.100 Auto

    >>>DRAM
    DRAM Voltage 1.500v .................... 1.50V
    DRAM Termination 0.750v ............... [AUTO: 0.75v]
    Ch-A Data VRef. 0.750v ................. [AUTO: 0.75v]
    Ch-B Data VRef. 0.750v ................. [AUTO: 0.75v]
    Ch-C Data VRef. 0.750v ................. [AUTO: 0.75v]
    Ch-A Address VRef. 0.750v ............. [AUTO: 0.75v]
    Ch-B Address VRef. 0.750v ............. [AUTO: 0.75v]
    Ch-C Address VRef. 0.750v ............. [AUTO: 0.75v]

    I have played with upping the qpi/vtt, dram, ioh and qpi voltages a little but it still does the same thing. Any help will be greatly appreciated.
    Gigabyte GA-EX58-UD4P F10d
    Intel i7 920 D0 3.8Ghz 181x21 1.24375Vcore 1.195QPI/Vtt
    Noctua NH-U12P SE1366 push-pull, vertically mounted
    3x2GB G.Skill DD3 1600 F3-12800CL9T-6GBNQ 8-8-8-21-1T 1.54v
    2x EVGA GeForce GTX 260 Core 216 SLI 700-1500-1200
    CORSAIR CMPSU-850TX 850W PSU
    2x WD Caviar Black 640GB in Raid 0, 64KB stripes, 250GB short stroke
    WD Caviar Black 1TB
    Antec 1200 Gamer Case
    Windows 7 Ultimate x64

  2. #2
    Join Date
    Jun 2009
    Posts
    91

    Default Re: Sleep problems and I'm not talking nightmares

    Try the F9a bios.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •