Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: E8600 on X48-DQ6




  1. #11
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: E8600 on X48-DQ6

    Yhea pretty tight timings, tRD 6 is nice, what are memory performance?

  2. #12
    Join Date
    Jun 2009
    Posts
    20

    Default Re: E8600 on X48-DQ6

    Here

    400fsb




    and 425fsb




    I know i can push further like 450 fsb 1080 ddr same settings (adding a little more vDimm) but i'm happy as it is...
    Bare in mind that results came with GMCH stock voltage , i just put +0.050 for the little extra.


  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  4. #14
    Join Date
    Jun 2009
    Posts
    20

    Default Re: E8600 on X48-DQ6

    Probably ... plus that i didn't count correctly motherboard's vDrop/Vdroop for E8600 and i had put little vcore (per your suggestion) for the needs of 3.8-4 Ghz.
    Also as i mentioned earlier i don't know what changes came with F8e (besides newer AHCI) but surely it's a stable one......

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: E8600 on X48-DQ6

    Well I am glad you like the BIOS, newer is good I think! I always run the latest beta and never the finals

    So I suggested not enough Vcore? If so, sorry about that, I musta overlooked something and not told you that you may have needed more.

  6. #16
    Join Date
    Jun 2009
    Posts
    20

    Default Re: E8600 on X48-DQ6

    Thats ok . You have already mentioned and you had right..

    You may just need more Vcore, I'd bump it up a little bit just to be sure that is not the issue. Then if it still crashes you know that was not it, and you can lower it back down some.
    I have read so much info from others posts including your guide that is more then enough to get the idea....

    Q.
    Is there any way to flash my backup bios (Alt +F12 does not apply to my board)
    Last edited by Rivenson; 08-23-2009 at 09:39 AM.

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: E8600 on X48-DQ6

    Nice to see I did mention it, and you have been reading up on things!

    Well that applies, but only with certain BIOS Versions. What version are you using? Did you try older ones?

    There is no need to update that anyway, and it can void your warranty really as they want that to remain how it was shipped. If it is really bothering you let me know and I can advise somethings to you via PM, but again keep your warranty in mind

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •