Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: GA-EX58-UD3R Problem




  1. #1
    Join Date
    Jul 2009
    Posts
    14

    Default GA-EX58-UD3R Problem

    Hi! Heres some crucial info about my machine:

    i7 920 boxed CPU
    Gigabyte GA-EX58-UD3R Mobo
    3 x 2 GB OCZ Platinum XTC Triple Channel 6GB Kit 3x2GB DDR3 PC3-12800 1600MHz
    Sapphire RadeonHD 4890 1GB
    Antec Basiq 500w Power


    I'v had this new rig for about 1,5 weeks now and I keep getting bluescreens when I play games like CSS and GTA4 (mostly GTA4 crashes) + some random crashes when I do something else. Error is usually:

    PAGE_FAULT_IN_NONPAGED_AREA

    I'v been asking around and googling and so far I think my memory causes these crashes. I raised the DRAM voltages to 1.64v (because that memory is low voltage and i7 will fry if I set it higher, right) and tried to find a setting to disable memory cache (someone told to look for this, it could help), but no luck. Also, the mem frequency is at 1066Mhz, but these modules should be running at 1600. Whats up with that?

    I have done some things in BIOS (c1e + EIST off at CPU settings, someone told it could resolve this, but no luck so far)

    I'm not mr Einstein with computers so could someone give me a hand here and tell what I should tweak? Never had this problem I'm kinda lost. Thanks in advance.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EX58-UD3R Problem

    According to Microsoft this can be either a hardware (usually memory,) or software related problem.
    You can try to run a memory test, but it could be a faulty driver as well, and since you say it happen in games, most likely the video driver.

    Quote Originally Posted by kaLLe View Post
    I raised the DRAM voltages to 1.64v (because that memory is low voltage and i7 will fry if I set it higher, right)
    This is realy memory module specific, you should have a label on the modules or on the box for your modules max voltage.

    Quote Originally Posted by kaLLe View Post
    Also, the mem frequency is at 1066Mhz, but these modules should be running at 1600. Whats up with that?
    This depends on the motherboared, some will default to the EPP profile and others won't where you woud have to set it manually.

  3. #3
    Join Date
    May 2009
    Posts
    16

    Default Re: GA-EX58-UD3R Problem

    Sounds like a memory problem to me. Did you overclock? I suggest you try running Memtest 86+ or Windows Memory Diagnostic for memory checking and OCCT/LinX/Intel Burn Test to test system stability.

  4. #4
    kg4icg is offline Junior Member
    Join Date
    Jul 2009
    Location
    Herndon, Va
    Posts
    21

    Default Re: GA-EX58-UD3R Problem

    Unless you turned on xmp profile#1 which would have set your memory speed automatically, I would turn your mem voltage back to auto. If you enabled C.I.A.2 I would disable it, because that causes system stability problems.

  5. #5
    Join Date
    Jul 2009
    Posts
    14

    Default Re: GA-EX58-UD3R Problem

    I'm still having problems. I flashed BIOS to a newer version, (F2=>F3) didn't really have any effect so I guess the problem is elsewhere. I have tried installing older driver versions to my graphics card, but no effect.

    I dunno much, but I would like to know how much does the memory timings have effect on anything? I read this from the manufacturers site:

    CL 8-8-8-24
    (CAS-TRCD-TRP-TRAS)

    In BIOS it says something around 7-7-7-21 ? Are those wrong? Should I change em?

  6. #6
    kg4icg is offline Junior Member
    Join Date
    Jul 2009
    Location
    Herndon, Va
    Posts
    21

    Default Re: GA-EX58-UD3R Problem

    What rev board do you have 1.0 or 1.6 because I have 1.6 and my bios is FB dated back in May

  7. #7
    Join Date
    Jul 2009
    Posts
    14

    Default Re: GA-EX58-UD3R Problem

    Rev 1.0

  8. #8
    Join Date
    Jul 2009
    Posts
    14

    Default Re: GA-EX58-UD3R Problem

    Does the Windows 7 RC OS have any effect on this? Maybe thats the problem? Should I try with Vista?

  9. #9
    Join Date
    Jul 2009
    Location
    Salisbury
    Posts
    14

    Default Re: GA-EX58-UD3R Problem

    Hi,

    Also make sure that the chipset drivers you have installed are the correct version for your o/s as if you use the 32bit version on a 64 bit o/s (and vice versa) this will cause issues with stability.

    I would also set your BIOS to default. Is best to get your rig stable before you start tweaking anything.

    Kind regards,
    Last edited by Judderman; 07-17-2009 at 03:16 PM. Reason: Grammar
    Antec 1200 Case
    Gigabyte GA-MA790XT UD4P - Bios F4I
    AMD Phenom II 955 Black Edition - Xigamatech HDT S1283
    2 x WD Raptor drives (36gb) RAID0 -(O/S and installed Programs)
    4 x WDCaviar Green(1.5tb) - RAID5 - (Storage)
    ATI HD 4870 (1gb DDR5)
    OCZ Platinum AMD Edition 4GB (2x2GB) DDR3 (OCZ3P1600LVAM4GK)
    OCZ Silent 700w PSU

    MS Windows 7 RC1 64bit O/S

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD3R Problem

    It is memory/memory related settings that are incorrect causing memory failures most likely.

    Can you please give me your settings you are using and I will advise back, and about the memory settings, what you see on the right not left is what is being used.

    If you want, I prefer, also please download this program and take a screenshot of it open so I can see what actual settings are being applied to your memory. Please be sure to press the "Sub Timings" button so we can see all settings.

    http://www.tweakers.fr/download/CPU-Tweaker12b9.zip

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................
    tWTP .......................................
    tWL ........................................   (tWTP Must = tWR + tWL + 4)(tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................
    QPI/VTT Voltage 1.150v ............
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •