Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Issues booting on x58-UD5 (OC)




  1. #31
    Join Date
    Jul 2009
    Posts
    43

    Default Re: Issues booting on x58-UD5 (OC)

    Ok found this on another forum and here I go will be testing my dimms at 1.7V cause i need it to be 100 % 20 loops Intel burn test stable!

    QPI/DRAM Voltage - 1.35V: This is poorly worded by Asus - it should read uncore or QPI/memory
    controller voltage so not to confuse it with the actual memory voltage. Increasing this is
    also necessary as it helps overclock the base frequency as the uncore area overclocks increase
    in relation to the CPU core overclocks. This voltage is tied to actual DRAM voltage - the two
    are directly connected on the motherboard. You'll need to increase this to keep the CPU safe.
    While Asus and Intel (rightly) scare everyone (read: uneducated) into thinking that 1.65V
    on the DRAM voltage should be the absolute limit before you reach for the fire-blanket, all
    that's really needed it to obey this: keep the CPU uncore voltage within 0.5V difference of
    the DRAM voltage and there's no problem. Over this potential difference and you’ll greatly
    increase the chance of CPU death, but it certainly won't happen instantly in a big ball of
    fail fire if you make a mistake.
    We found that enabling the HPET (High Performance Event Timer), or as Asus label it, APCI 2,
    is critical for keeping the clocks on Core i7 CPUs accurate. Without it turned on, the
    multiplier jumps around crazily if we watch CPU-Z, but with it on, the multiplier reading is
    solid and the clock frequency only jitters very slightly according to fractional variations
    in the base clock.
    Intel Core7 920. C0 stepping @ 3.2 GHz
    Gigabyte GA-X58-extreme (BIOS v.F8e)
    Cooler Master HAF 932
    PSU: Tagan 700 watts
    Cooler Master V8 CPU cooler
    RAM: OCZ3P1600LV6G - 6GB Triple Channel - 1600 Mhz @ 7,7,7,21
    GPU:Zotac GTX275
    HDD:1TB Segate 7200.12 & 1TB WD caviar Black edition
    Os: 64bit Windows 7 , OSX Leopard 10.5.7 & Vista 32 Bit SP2
    Mon : Asus 26inch @ 1920 x 1200

  2. #32
    Join Date
    Jul 2009
    Posts
    43

    Default Re: Issues booting on x58-UD5 (OC)

    have a look at what corsair sets :
    Dominator Qualifications and Testing! - The Corsair Support Forums


    DDR3 TRI XM3S Dominator & DHX & "GT"

    Testing parameters for TR3X3G1333C9 /TR3X6G1333C9
    TR3X3G1333C9 Data Sheet
    TR3X6G1333C9 Data Sheet

    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1333 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________9
    RAS# to CAS# Delay:______9
    RAS# Precharge:__________9
    RAS# Activate to Precharge:24
    DRAM Voltage:_________1.50V
    QPI Voltage: __________1.25 V
    XMP Disabled
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts

    Testing parameters for TR3X3G1600C9/TR3X6G1600C9
    TR3X3G1600C9 Data Sheet
    TR3X6G1600C9 Data Sheet

    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1600 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________9
    RAS# to CAS# Delay:______9
    RAS# Precharge:__________9
    RAS# Activate to Precharge:24
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.35 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts


    Testing parameters for TR3X3G1600C8D/TR3X6G1600C8D
    TR3X3G1600C8D Data Sheet
    TR3X6G1600C8D Data Sheet

    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1600 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________8
    RAS# to CAS# Delay:______8
    RAS# Precharge:__________8
    RAS# Activate to Precharge:24
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.35 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts



    Testing parameters for TR3X3GB/XMS3-1866C9DF:
    Testing parameters for TR3X6GB/XMS3-1866C9DF:
    TR3X3G1866C9DF Data Sheet
    TR3X6G1866C9DF Data Sheet

    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1866 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________9
    RAS# to CAS# Delay:______9
    RAS# Precharge:__________9
    RAS# Activate to Precharge:24
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.60 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts

    Testing parameters for The TR3X6G1866C7GTF: TR3X6G1866C7GTF Data Sheet


    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1866 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________7
    RAS# to CAS# Delay:______8
    RAS# Precharge:__________7
    RAS# Activate to Precharge:20
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.60 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts

    Testing parameters for The TR3X6G2000C8GTF: TR3X6G2000C8GTF Data Sheet


    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1866 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________8
    RAS# to CAS# Delay:______8
    RAS# Precharge:__________8
    RAS# Activate to Precharge:20
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.60 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts


    Testing parameters for The TR3X3G2000C7GTF: TR3X3G2000C7GTF Data Sheet
    Testing parameters for The TR3X6G2000C7GTF: TR3X6G2000C7GTF Data Sheet


    Motherboard make and model: ASUS P6T Premium/Deluxe !
    Each set is tested and packaged together using the following settings:
    Advanced
    Jumper Free
    CPU Ratio Control:Depends on CPU
    FSB Frequency: AUTO
    PCIE Frequency: 100
    DRAM Frequency: DDR3-1866 MHz
    DRAM Timings Control: Manual
    CAS# Latency:___________7
    RAS# to CAS# Delay:______8
    RAS# Precharge:__________7
    RAS# Activate to Precharge:20
    DRAM Voltage:_________1.65V
    QPI Voltage:___________1.60 V
    XMP1.2 settings
    All settings not listed should be left at AUTO or BIOS Default
    Maximum DDR3 recommended VDIMM: 2.00 Volts
    Intel Core7 920. C0 stepping @ 3.2 GHz
    Gigabyte GA-X58-extreme (BIOS v.F8e)
    Cooler Master HAF 932
    PSU: Tagan 700 watts
    Cooler Master V8 CPU cooler
    RAM: OCZ3P1600LV6G - 6GB Triple Channel - 1600 Mhz @ 7,7,7,21
    GPU:Zotac GTX275
    HDD:1TB Segate 7200.12 & 1TB WD caviar Black edition
    Os: 64bit Windows 7 , OSX Leopard 10.5.7 & Vista 32 Bit SP2
    Mon : Asus 26inch @ 1920 x 1200

  3. #33
    Join Date
    Mar 2009
    Posts
    18

    Default Re: Issues booting on x58-UD5 (OC)

    I'm starting to lose track of all of these settings that are being posted here. What are all of these ram testing perameters?

  4. #34
    Join Date
    Jul 2009
    Posts
    43

    Default Re: Issues booting on x58-UD5 (OC)

    these are the settings which Corsair uses to Qualify their XMP Dimms at
    Intel Core7 920. C0 stepping @ 3.2 GHz
    Gigabyte GA-X58-extreme (BIOS v.F8e)
    Cooler Master HAF 932
    PSU: Tagan 700 watts
    Cooler Master V8 CPU cooler
    RAM: OCZ3P1600LV6G - 6GB Triple Channel - 1600 Mhz @ 7,7,7,21
    GPU:Zotac GTX275
    HDD:1TB Segate 7200.12 & 1TB WD caviar Black edition
    Os: 64bit Windows 7 , OSX Leopard 10.5.7 & Vista 32 Bit SP2
    Mon : Asus 26inch @ 1920 x 1200

  5. #35
    Join Date
    Mar 2009
    Posts
    18

    Default Re: Issues booting on x58-UD5 (OC)

    Any more tips, LSD? the booting issue is gone now.

  6. #36

    Default Re: Issues booting on x58-UD5 (OC)

    Quote Originally Posted by eclipseone View Post
    Any more tips, LSD? the booting issue is gone now.
    Good to hear that its stable. Have you tried overclocking some more?

    You will need to change memory multiplier because I think you will hit a wall at around 1600 MHz RAM speed.

    Did you try BCLK 200 with same settings - did it boot?

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •