Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 50

Thread: Computer Freezes!




  1. #31
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Computer Freezes!

    Quote Originally Posted by friendlyphil View Post
    I was advised to increase the DRAM voltage to 1.98. I did. But I am not sure what it has done to my temperatures. Since I've never monitored them before, I don't know if what I have now is normal or not. Can you help me out?
    System: 46 C
    CPU: 38C
    They are quite higher than the normal, but they depend on many other factors such as your ambiant temperature, air flow around the computer, your case fan(s) or CPU heatsink, not just voltage.
    Could you post a screen grab of HWMonitor and MemSet (both channels and SPD)?

  2. #32
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Computer Freezes!

    As chike stated earlier please fill out this template with your bios settings. Also If it were me I would do this for grins and giggles. I would reset the CMOS, load optimized defaults, set up your bios as far as regular stuff, reboot. Input you rams specs as on the side of your ram reboot into windows. Oh and What your processor? A Q9550? Your Bios is?

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
     
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
     
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
     
    Driving Strength Profiles
    Driving Strength ............................
     
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
     
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
     
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
     
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
     
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
     
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    then we'll go from there.

  3. #33
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Computer Freezes!

    Here's the first. I still don't know how to do both at once. Also, I don't know how to make that cute settings chart work and how to add it. Please help me out. As you might have guessed, I'm stupid.
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  4. #34
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Computer Freezes!

    Here's the second..............
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  5. #35
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Computer Freezes!

    Don't worry about screen shots just copy and past the whats inside of the gray box with your changes into your reply.

    encapsulate that with a bracket [ then type code then another bracket] at the end of the text type a beacket [ a backslash / then type code then type another bracket ]

    Code:
     [ code ]text here[ /code ]
    but remove the spaces between the brackets ..make sence?

  6. #36
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Computer Freezes!

    The spd of memset too please.
    To grab the front/active window only, press Alt+PrScr, then paste it in Paint and save as type PNG.

    Yes it's a good practice to set all memory timings manuakky, that's how I stabiliized my computer at 266MHz FSB. I learned qucik not to trust the autos.

    I'm going to sleep so Conners will take you from here :)

    Yor Static tRead Value is 6, it needs to be 7 or more, and don't forget +0.1 MCH Voltage. I would also set strength level to 1066.
    Your ram may need even more voltage look at it's spec.

    BTW your CPU temps are lower than mine, system is a little hige, the case fan is probably too weak.

  7. #37
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Computer Freezes!

    Below are my settings. But can you tell me exactly how to set +0.1 MCH? I have an MCH Core, MCH Reference and MCH/DRAM Ref. To which do you refer?



    MB Intelligent Tweaker(M.I.T.)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    </PRE>

    Robust Graphics Booster ..: Auto
    CPU Clock Ratio ...............: 9x
    Fine CPU Clock Ratio.........:.0
    CPU Frequency .................:3.00 GHz (333x9)<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Clock Chip Control <o:p></o:p>
    </PRE>

    Standard Clock Control<o:p></o:p>
    </PRE>

    CPU Host Clock Control........: [Disabled]
    CPU Host Frequency (Mhz) ..: 333Mhz<o:p></o:p>
    </PRE>

    PCI Express Frequency (Mhz) .........:Auto<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    C.I.A.2 ...................:[Disabled]<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Clock Control [Press Enter]<o:p></o:p>
    </PRE>

    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street><st1:address>CPU Clock Drive</st1:address></st1:Street>.............: 700
    PCI Express Clock Drive..:700
    CPU Clock Skew (ps)......: 0
    <st1:stockticker>MCH</st1:stockticker> Clock Skew (ps).....: 0<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker> Performance Control<o:p></o:p>
    </PRE>

    Performance Enhance............: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Auto
    (G)<st1:stockticker>MCH</st1:stockticker> Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 1066
    <st1:stockticker>DRAM</st1:stockticker> Timing Selectable ................: [Manual]<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Standard Timing Control<o:p></o:p>
    </PRE>

    <st1:stockticker>CAS</st1:stockticker> Latency Time.....5 Auto
    tRCD .......................5 Auto
    tRP'..........................5 Auto
    tRAS........................15 Auto<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Timing Control<o:p></o:p>
    </PRE>

    tRRD..........................4 Auto
    tWTR..........................4 Auto
    tWR............................8 Auto
    tRFC............................68 Auto
    tRTP.............................4 Auto
    Command Rate (CMD) ..:0<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Driving Strength Profiles<o:p></o:p>
    </PRE>

    Driving Strength ............................<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Channel A<o:p></o:p>
    </PRE>

    Static tRead Value...............:7
    tRD Phase0 Adjustment.......:0 Auto
    tRD Phase1 Adjustment.......:0 Auto
    tRD Phase2 Adjustment ......: 0 Auto
    tRD Phase3 Adjustment.......: 0 Auto
    Trd2rd(Different Rank).........: 8 Auto
    Twr2wr(Different Rank)........:8 Auto
    Twr2rd(Different Rank).........:7 Auto
    Trd2wr(Same/Diff Rank).......:9 Auto
    Dimm1 Clock Skew Control....:Auto ps
    Dimm2 Clock Skew Control....:Auto ps<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Channel B<o:p></o:p>
    </PRE>

    Static tRead Value................: 7
    tRD Phase0 Adjustment........: 0 Auto
    tRD Phase1 Adjustment........: 0 Auto
    tRD Phase2 Adjustment .......: 0 Auto
    tRD Phase3 Adjustment........: 0 Auto
    Trd2rd(Different Rank).........: 8 Auto
    Twr2wr(Different Rank)........: 8 Auto
    Twr2rd(Different Rank).........: 7 Auto
    Trd2wr(Same/Diff Rank).......: 9 Auto
    Dimm1 Clock Skew Control...: Auto ps
    Dimm2 Clock Skew Control...: Auto ps<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Motherboard Voltage Control<o:p></o:p>
    </PRE>

    Voltage Type.………... Manual<o:p></o:p>
    </PRE>

    CPU<o:p></o:p>
    </PRE>

    CPU Vcore….………....: 1.250
    CPU Termination…...: 1.20
    CPU <st1:stockticker>PLL</st1:stockticker>………………….: 1.50
    CPU Referen.……….: 7.60
    CPU Reference2…...:N/A
    <st1:stockticker>MCH</st1:stockticker>/<st1:stockticker>ICH</st1:stockticker><o:p></o:p>
    </PRE>

    <st1:stockticker>MCH</st1:stockticker> Core……………...:1.10
    <st1:stockticker>MCH</st1:stockticker> Reference….….;.760
    <st1:stockticker>MCH</st1:stockticker>/<st1:stockticker>DRAM</st1:stockticker> Ref.…...:.90
    <st1:stockticker>ICH</st1:stockticker> I/O………………...:1.50
    <st1:stockticker>ICH</st1:stockticker> Core…………...….:1.10<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker><o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker> Voltage …….......: 1.980
    <st1:stockticker>DRAM</st1:stockticker> Termination .…..:.990
    Channel A Reference ...:.990
    Channel B Reference ...:.990<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Settings<o:p></o:p>
    </PRE>

    Limit CPUID Max. to 3............: [Disabled]
    No-Execute Memory Protect....: [Enabled]
    CPU Enhanced Halt (C1E).......: [Enabled]
    C2/C2E State Support............: [Disabled]
    x C4/C4E State Support.........:[Disabled]
    CPU Thermal Monitor 2(TM2) .: [Enabled]
    CPU EIST Function................: [Enabled]
    Virtualization Technology.......: [Enabled] <o:p></o:p>
    </PRE>

    Integrated Peripherals<o:p></o:p>
    </PRE>

    Legacy USB Storage Detect ...[Enabled]
    </PRE>
    <?xml:namespace prefix = v ns = "urn:schemas-microsoft-com:vml" /><v:shape id=_x0000_i1025 style="WIDTH: 45pt; HEIGHT: 30pt" alt="" type="#_x0000_t75"><v:imagedata o:href="http://forums.tweaktown.com/images/smilies/beerchug.gif" src="file:///C:\Users\FRIEND~1\AppData\Local\Temp\msohtml1\01\c lip_image001.gif"></v:imagedata></v:shape><o:p></o:p><o:p></o:p>
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  8. #38
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Computer Freezes!

    O.K.

    set
    Code:
     
    Extreme Memory Profile (X.M.P.).....: Disabled
    System Memory Multiplier ..............: 3.2
    set below settings manually, don't leave them on auto, just copy what you see on the left
    Code:
     
    Standard Timing Control
    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:stockticker itxtvisited="1">CAS</st1:stockticker> Latency Time.....5 Auto
    tRCD .......................5 Auto
    tRP'..........................5 Auto
    tRAS........................15 Auto<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p itxtvisited="1"></o:p>
     
    Advanced Timing Control<o:p itxtvisited="1"></o:p>
    tRRD..........................4 Auto
    tWTR..........................4 Auto
    tWR............................8 Auto
    tRFC............................68 Auto
    tRTP.............................4 Auto
    set both channels Driving Strength to 1066 and Static tRead Value to 8 or even 9.

    set
    Code:
    MCH Core……………...:1.20
    Your memory may require more voltage for 1066, look at it's specs or at the EPP profile in spd of CPU-Z/MemSet.

  9. #39
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Computer Freezes!

    Code:
    Advanced Clock Control [Press Enter]
    
    
    CPU Clock Drive.............: 700
    PCI Express Clock Drive..:700
    CPU Clock Skew (ps)......: 0
    MCH Clock Skew (ps).....: 0
    If this section is correct to your BIOS, then you have set ||Failsafe Defaults. It would be a good idea to load optimized defaults, then re-enter settings manually (not from a saved profile) before continuing.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  10. #40
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Computer Freezes!

    These latest tweaks seem to have made things worse. Now, the computer seems to "stutter" ever 5-10 seconds or so. For instance, playing music via WMP the music stutters a lot.
    Here are my latest settings and temps:



    MB Intelligent Tweaker(M.I.T.)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    </PRE>

    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.00 GHz (333x9)<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Clock Chip Control <o:p></o:p>
    </PRE>

    Standard Clock Control<o:p></o:p>
    </PRE>

    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz<o:p></o:p>
    </PRE>

    PCI Express Frequency (Mhz) .........:Auto<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    C.I.A.2 .................................:[Disabled]<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Clock Control [Press Enter]<o:p></o:p>
    </PRE>

    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street><st1:address>CPU Clock Drive</st1:address></st1:Street>...........................: 700
    PCI Express Clock Drive.................: 700
    CPU Clock Skew (ps)....................: 0
    <st1:stockticker>MCH</st1:stockticker> Clock Skew (ps)...................: 0<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker> Performance Control<o:p></o:p>
    </PRE>

    Performance Enhance...................: [STANDARD]<o:p></o:p>
    </PRE>

    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)<st1:stockticker>MCH</st1:stockticker> Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.2
    Memory Frequency (Mhz) ..............: 1066
    <st1:stockticker>DRAM</st1:stockticker> Timing Selectable ................: [Manual]<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Standard Timing Control<o:p></o:p>
    </PRE>

    <st1:stockticker>CAS</st1:stockticker> Latency Time........................5 Auto
    tRCD .........................................5 Auto
    tRP'...........................................5 Auto
    tRAS..........................................15 Auto<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Timing Control<o:p></o:p>
    </PRE>

    tRRD...........................................4 Auto
    tWTR..........................................4 Auto
    tWR............................................8 Auto
    tRFC...........................................68 Auto
    tRTP...........................................4 Auto
    Command Rate (CMD) ....................:0<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Driving Strength Profiles<o:p></o:p>
    </PRE>

    Driving Strength ............................<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Channel A<o:p></o:p>
    </PRE>

    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Channel B<o:p></o:p>
    </PRE>

    Static tRead Value.........................: 7
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)..................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Motherboard Voltage Control<o:p></o:p>
    </PRE>

    Voltage Type.………... Manual<o:p></o:p>
    </PRE>

    CPU<o:p></o:p>
    </PRE>

    CPU Vcore….……….........................: 1.250
    CPU Termination…..... 1.200V*.......: 1.20
    CPU <st1:stockticker>PLL</st1:stockticker>…………………....1.500V*.......: 1.50
    CPU Referen.…………....0.755V*.......: 7.60
    CPU Reference2………,,0.800V*.......: N/A<o:p></o:p>
    </PRE>

    <st1:stockticker>MCH</st1:stockticker>/<st1:stockticker>ICH</st1:stockticker><o:p></o:p>
    </PRE>

    <st1:stockticker>MCH</st1:stockticker> Core…………….....1.100V...........: 1.20
    <st1:stockticker>MCH</st1:stockticker> Reference….…….0.800V...........; .760
    <st1:stockticker>MCH</st1:stockticker>/<st1:stockticker>DRAM</st1:stockticker> Ref.…......0.900V...........: .90
    I<st1:stockticker>CH</st1:stockticker> I/O……………….....1.500V............: 1.0
    <st1:stockticker>ICH</st1:stockticker> Core…………...……1.100V............: 1.10<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker><o:p></o:p>
    </PRE>

    <st1:stockticker>DRAM</st1:stockticker> Voltage ……....1.800V............: 1.980
    <st1:stockticker>DRAM</st1:stockticker> Termination .…0.900V............: .990
    Channel A Reference 0.900V............: .990
    Channel B Reference 0.900V............: .990<o:p></o:p>
    </PRE>

    <o:p></o:p>
    </PRE>

    Advanced Settings<o:p></o:p>
    </PRE>

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled] <o:p></o:p>
    </PRE>

    Integrated Peripherals<o:p></o:p>
    </PRE>

    Legacy USB Storage Detect ..............[Enabled] *Note* Must be enabled to flash from USB<o:p></o:p>
    </PRE>

    System temp: 47 C
    CPU temp: 35 C

    Any suggestions?
    <o:p></o:p>
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

Page 4 of 5 FirstFirst ... 2345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •