Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: need to tweak ep45ds3l




  1. #31
    Join Date
    Sep 2008
    Posts
    990

    Default Re: need to tweak ep45ds3l

    (G)MCH Frequency Latch...............:266
    System Memory Multiplier (SPD)..............:2.0a
    Try 400 and 2.0D for those.

    Also, I'm not sure your chip can do 4GHz, not al E7x00 overclock that well, so maybe your CPU just can't do 4GHz.
    I'd also lower CPU termination a bit, that much shouldn't be necessary and can actually damage the CPU.


  2. #32
    Join Date
    Jul 2009
    Posts
    22

    Default Re: need to tweak ep45ds3l

    the cpu you think hmm
    i get the feeling its the board but im pobably wrong 4.0ghz is a long hall for a 2.6
    Im no closer after tweaking for hours so mabey ill just live with 3.6ghz
    Its funny 4.0 at the post get to windows splash screen pc reboots I get a quick blue screen to fast to read the error is tha the video error ive read about
    caused by the pcie bus
    Gigabyte EP45 DS3L F10 Bios E7300 Zalman cnp9700 cooler 2G Kit Patriot Memory Viper pc2 9600 1200mhz 2.3v XFX 9800GTX+ LG W2253TQ 1920x1080 LCD Antec neo hd 550watt power supply

  3. #33
    Join Date
    Jul 2009
    Posts
    22

    Default Re: need to tweak ep45ds3l

    check out these settings
    this boots up fine
    can anyone tell me why i cant boot
    at 400 x10



    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................:8x
    Fine CPU Clock Ratio.....................:0
    CPU Frequency ...........................:4.66(466x8)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................:enabled
    CPU Host Frequency (Mhz) ............:mhz 466
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:disabled

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 800
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0

    DRAM Performance Control
    Performance Enhance...................:standard
    Extreme Memory Profile (X.M.P.).....:auto
    (options are auto,profile 2,disabled)
    (G)MCH Frequency Latch...............:400
    System Memory Multiplier (SPD)..............:2.00d
    Memory Frequency (Mhz) ..............: 1066 932
    DRAM Timing Selectable ................:auto
    Standard Timing Control
    CAS Latency Time..............................:5 auto
    tRCD .........................................:5 auto
    tRP'..........................................:5 auto
    tRAS..........................................:11 auto

    Advanced Timing Control
    tRRD...........................................aut o
    tWTR...........................................aut o
    tWR............................................aut o
    tRFC...........................................aut o
    tRTP...........................................aut o
    Command Rate (CMD) ....................:auto
    Driving Strength Profiles
    Driving Strength ............................auto
    Channel A
    Static tRead Value.........................: auto
    tRD Phase0 Adjustment...................: auto
    tRD Phase1 Adjustment...................: auto
    tRD Phase2 Adjustment .................: auto
    tRD Phase3 Adjustment..................: auto
    Trd2rd(Different Rank)....................: auto
    Twr2wr(Different Rank)...................: auto
    Twr2rd(Different Rank)...................: auto
    Trd2wr(Same/Diff Rank)..................: auto
    Dimm1 Clock Skew Control...............:auto
    Dimm2 Clock Skew Control...............:auto
    ddr write training......................:auto
    Channel B
    Channel BStatic tRead Value.........................: auto
    tRD Phase0 Adjustment...................: auto
    tRD Phase1 Adjustment...................: auto
    tRD Phase2 Adjustment .................: auto
    tRD Phase3 Adjustment..................: auto
    Trd2rd(Different Rank)....................: auto
    Twr2wr(Different Rank)...................: auto
    Twr2rd(Different Rank)...................: auto
    Trd2wr(Same/Diff Rank)..................: auto
    Dimm1 Clock Skew Control...............:auto
    Dimm2 Clock Skew Control...............:auto
    ddr write training......................:auto

    Motherboard Voltage Control
    Voltage Type normal current
    CPU
    CPU Vcore….………........1.2125......: 1.425
    CPU Termination…..... 1.200V*.......: 1.3
    CPU PLL…………………....1.550V*.......: 1.65
    CPU Referen.…………....0.805V*.......:.868

    MCH/ICH
    MCH Core…………….....1.100V...........:1.28
    MCH Reference….…….0.800V...........;.803

    ICH I/O……………….....1.55V............: auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.5
    DRAM Termination .…0.900V............:auto


    Advanced Settings
    Limit CPUID Max. to 3.....................:disabled
    No-Execute Memory Protect............:enabled
    CPU Enhanced Halt (C1E)................:disabled
    C2/C2E State Support....................:disabled
    x C4/C4E State Support..................:disabled
    CPU Thermal Monitor 2(TM2) ...........:enabled
    CPU EIST Function.........................:disabled
    Gigabyte EP45 DS3L F10 Bios E7300 Zalman cnp9700 cooler 2G Kit Patriot Memory Viper pc2 9600 1200mhz 2.3v XFX 9800GTX+ LG W2253TQ 1920x1080 LCD Antec neo hd 550watt power supply

  4. #34
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: need to tweak ep45ds3l

    Quote Originally Posted by tweakn View Post
    check out these settings
    this boots up fine
    can anyone tell me why i cant boot
    at 400 x10
    Can't boot with the same settings?
    Maybe see what memset show for perfomence level with these settings and set Static tRead to that value and try 400x10.
    Why 2.5v DIMM voltage, your memory is underclocked?

  5. #35
    Join Date
    Jul 2009
    Posts
    22

    Default Re: need to tweak ep45ds3l

    performance level is blank in memset
    just tweakn things thought ram may need a little back at 2.3 now
    mch core voltage is that the nortbridge voltage and is my system temp in bios refer to that chip
    also 1:1 vs all other ratios my testing shows not much difference (tiny bandwidth difference) in performance when not overclocking i can use every strap and multi same thing with timmings loose (5-7-7-20)or tight(5-4-4-9)
    i guess i dont get this part running 1:1 dram fsb mch freq latch=xxx mhz sytem memory multi=2.0 min that dont add up 2 x any of the latches = more than 1:1
    Gigabyte EP45 DS3L F10 Bios E7300 Zalman cnp9700 cooler 2G Kit Patriot Memory Viper pc2 9600 1200mhz 2.3v XFX 9800GTX+ LG W2253TQ 1920x1080 LCD Antec neo hd 550watt power supply

  6. #36
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: need to tweak ep45ds3l

    Quote Originally Posted by tweakn View Post
    performance level is blank in memset
    I've seen that too, I think when it is over 15 memset shows blank, it only has 15 max. Try setting it on something reasonable 8-9 with multiplier 2.00D and try the 400x10.

    Quote Originally Posted by tweakn
    just tweakn things thought ram may need a little back at 2.3 now

    mch core voltage is that the nortbridge voltage and is my system temp in bios refer to that chip
    MCH Cire is NB I think, or part of the NB, not sure, but have no idea where the system temp is taken I don't think it's the NB temp.

    Quote Originally Posted by tweakn;
    also 1:1 vs all other ratios my testing shows not much difference (tiny bandwidth difference) in performance when not overclocking i can use every strap and multi same thing with timmings loose (5-7-7-20)or tight(5-4-4-9)

    i guess i dont get this part running 1:1 dram fsb mch freq latch=xxx mhz sytem memory multi=2.0 min that dont add up 2 x any of the latches = more than 1:1
    Leave the memory till you finish overclocking not worth playing with it till you finish, maybe not even then.

    EDIT: I read around the forum 400 is sometimes problematic, try 401.

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •