Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: EP45-UD3P: Help with re-boot issues




  1. #11
    FlyingHorse's Avatar
    FlyingHorse is offline Junior Member
    Join Date
    Jul 2009
    Location
    3359'43.1"N, 8409'03.1"W, 1058FT
    Posts
    41

    Default Re: EP45-UD3P: Help with re-boot issues

    Quote Originally Posted by Conners View Post
    Might give these settings a try!
    ---SNIP---
    Let us know how they work for you.
    Thanks for your input I need all the help I can get. I'll try your suggestions out and report back as soon as I can.
    Best regards,
    FlyingHorse

    GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10
    G.Skill F2-8800CL5Q-8GBPI (2GBx4) DDR2-1100
    EVGA 285GTX SSC Graphics + HP ZR24w + LG 32LH40
    HighPoint 2640x4 4-Port SAS RAID Controller
    Creative X-Fi ExtremeGamer Audio (PCI)
    Hauppauge WinTV-HVR 2250 Dual Digital Tuners
    2 WD 150GB Raptors RAID 0
    1 2TB Caviar Black

    3 1TB Caviar Blacks
    2 WD 500GB, 2 640GB, and 2 1TB Caviars in Icy Dock Mobile Racks
    LG GH22NS30 DVD Burner
    Lite-On iHOS104-08 Blu-ray Reader
    Corsair HX Series 1KW PSU
    Cooler Master ATCS 840 Full Tower
    Windows 8 Pro with Media Center

  2. #12
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: EP45-UD3P: Help with re-boot issues

    Hows it going horsey? Good Bad Ugly?

  3. #13
    FlyingHorse's Avatar
    FlyingHorse is offline Junior Member
    Join Date
    Jul 2009
    Location
    3359'43.1"N, 8409'03.1"W, 1058FT
    Posts
    41

    Default Re: EP45-UD3P: Help with re-boot issues

    Quote Originally Posted by Conners View Post
    Hows it going horsey? Good Bad Ugly?
    Iv'e been rode hard and put up wet

    It may be a couple of days before I go back to playing with the settings. It took me all day just to get SQL 2008 and VS 2008 and all the hotfixes I needed installed. I have about another 40 programs and utilities not including games. On top of all of that I went and flashed the new BIOS and made sure things were still stable. Meanwhile I have 8 or 9 things to get ready to be put on eBay and I still have to put my washer mod back on my TRUE 120 (Although I am seriously considering switching to water so I might not mess with the washer).

    How's that for information overload? I'll probably have to wait till this weekend to do any more testing.
    Best regards,
    FlyingHorse

    GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10
    G.Skill F2-8800CL5Q-8GBPI (2GBx4) DDR2-1100
    EVGA 285GTX SSC Graphics + HP ZR24w + LG 32LH40
    HighPoint 2640x4 4-Port SAS RAID Controller
    Creative X-Fi ExtremeGamer Audio (PCI)
    Hauppauge WinTV-HVR 2250 Dual Digital Tuners
    2 WD 150GB Raptors RAID 0
    1 2TB Caviar Black

    3 1TB Caviar Blacks
    2 WD 500GB, 2 640GB, and 2 1TB Caviars in Icy Dock Mobile Racks
    LG GH22NS30 DVD Burner
    Lite-On iHOS104-08 Blu-ray Reader
    Corsair HX Series 1KW PSU
    Cooler Master ATCS 840 Full Tower
    Windows 8 Pro with Media Center

  4. #14
    FlyingHorse's Avatar
    FlyingHorse is offline Junior Member
    Join Date
    Jul 2009
    Location
    3359'43.1"N, 8409'03.1"W, 1058FT
    Posts
    41

    Default Re: EP45-UD3P: Help with re-boot issues

    Here are the results using 2.40B strap that appear stable (I've only run 12 hours each Prime95 Small and Large FFT's):
    Code:
    Motherboard: EP45-UD3P Rev: 1.1
    BIOS Version: F10e
    CPU: Intel Q9650
    RAM: G.Skill F2-8800CL5Q-8GBPI (4x2GB)
         http://www.gskill.com/products.php?index=165
    PSU: Silverstone, ST75ZF, 750W
    GPU: EVGA 285GTX SSC Stock
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ---------------- : [Turbo]
    CPU Clock Ratio ------------------------ : [ 9x]
    Fine CPU Clock Ratio ------------------- : +0.0
    CPU Frequency ---------------------------: 4.05GHz( 450x9)
    
    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control ----------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------- : [ 450]
    PCI Express Frequency (Mhz) ------------ : [100]
    C.I.A.2 -------------------------------- : [Disabled]
    
    >>>>> Advanced Clock Control
    Advanced Clock Control ----------------- : [Press Enter]
    CPU Clock Drive ------------------------ : [ 800mV]
    PCI Express Clock Drive ---------------- : [ 900mV]
    CPU Clock Skew (ps) -------------------- : [   0ps]
    MCH Clock Skew (ps) -------------------- : [   0ps]
    
    ******** DRAM Performance Control ********
    Performance Enhance -------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) ---- : [Profile1]
    (G)MCH Frequency Latch ----------------- : [Auto]
    System Memory Multiplier (SPD) --------- : [2.40B]
    Memory Frequency (Mhz) ------ 1066 ----- :  1080
    DRAM Timing Selectable ----------------- : [Manual]
    
    >>>>> Standard Timing Control
    CAS Latency Time -------------  5 ------ : [5]
    tRCD  ------------------------  5 ------ : [   5]
    tRP --------------------------  5 ------ : [   5]
    tRAS  ------------------------ 15 ------ : [  15]
    
    >>>>> Advanced Timing Control
    Advanced Timing Control ---------------- : [Press Enter]
    tRRD  ------------------------  4 ------ : [   4]
    tWTR  ------------------------  4 ------ : [   4]
    tWR -------------------------- 13 ------ : [  13]
    tRFC  ------------------------ 68 ------ : [  68]
    tRTP  ------------------------  4 ------ : [   4]
    Command Rate (CMD) -----------  0 ------ : [   2]
    
    >>>>> Channel A and Channel B
    Channel A & B Timing Settings ---------- : [Press Enter]
    Static tRead Value -----------  8 ------ : [   8]
    tRD Phase0 Adjustment --------  0 ------ : [Auto]
    tRD Phase1 Adjustment --------  0 ------ : [Auto]
    tRD Phase2 Adjustment --------  0 ------ : [Auto]
    tRD Phase3 Adjustment --------  0 ------ : [Auto]
    
    Trd2rd(Different Rank) -------  8 ------ : [Auto]
    Twr2wr(Different Rank) -------  8 ------ : [Auto]
    Twr2rd(Different Rank) -------  7 ------ : [Auto]
    Trd2wr(Same/Diff Rank) -------  9 ------ : [Auto]
    
    Dimm1 Clock Skew Control --------------- : [Auto]
    Dimm2 Clock Skew Control --------------- : [Auto]
    DDR Write Training --------------------- : [Auto]
    
    Channel A & B Driving Settings --------- : [Press Enter]
    Driving Strength Profile --------------- : [1066MHz]
    
    Data Driving Pull-Up Level ------------- : [Auto]
    Cmd  Driving Pull-Up Level ------------- : [Auto]
    Ctrl Driving Pull-Up Level ------------- : [Auto]
    Clk  Driving Pull-Up Level ------------- : [Auto]
    
    Data Driving Pull-Down Level ----------- : [Auto]
    Cmd  Driving Pull-Down Level ----------- : [Auto]
    Ctrl Driving Pull-Down Level ----------- : [Auto]
    Clk  Driving Pull-Down Level ----------- : [Auto]
    
    ****** Motherboard Voltage Control ******
    >>> CPU
    Load-Line Calibration ------------------ : [Enabled]
    CPU Vcore -------------- 1.28750V  ----- : [1.38125V]
    CPU Termination ---------- 1.200V ------ : [1.300V]
    CPU PLL ------------------ 1.500V ------ : [1.650V]
    CPU Reference ------------ 0.760V ------ : [0.823V]
    
    >>> MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.240V]
    MCH Reference ----------- 0.760V ------- : [0.863V]
    MCH/DRAM Reference ------ 0.900V  ------ : [0.960V]
    ICH I/O ----------------- 1.500V ------- : [1.500V]
    ICH Core ---------------- 1.100V ------- : [1.100V]
    
    >>> DRAM
    DRAM Voltage ------------ 1.800V ------- : [1.920V]
    DRAM Termination -------- 0.900V ------- : [0.960V]
    Channel A Reference ----- 0.900V ------- : [0.960V]
    Channel B Reference ----- 0.900V ------- : [0.960V]
    
    Advanced BIOS Features
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Enabled]
    C2/C2E State Support ------------------- : [Enabled]
    C4/C4E State Support ------------------- : [Enabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Enabled]
    
    Integrated Peripherals
    USB Storage Function ------------------- : [Enabled]


    What do you guys think? Are there any adjustments I should consider?
    Best regards,
    FlyingHorse

    GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10
    G.Skill F2-8800CL5Q-8GBPI (2GBx4) DDR2-1100
    EVGA 285GTX SSC Graphics + HP ZR24w + LG 32LH40
    HighPoint 2640x4 4-Port SAS RAID Controller
    Creative X-Fi ExtremeGamer Audio (PCI)
    Hauppauge WinTV-HVR 2250 Dual Digital Tuners
    2 WD 150GB Raptors RAID 0
    1 2TB Caviar Black

    3 1TB Caviar Blacks
    2 WD 500GB, 2 640GB, and 2 1TB Caviars in Icy Dock Mobile Racks
    LG GH22NS30 DVD Burner
    Lite-On iHOS104-08 Blu-ray Reader
    Corsair HX Series 1KW PSU
    Cooler Master ATCS 840 Full Tower
    Windows 8 Pro with Media Center

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P: Help with re-boot issues

    Yes XMP = Disabled

    Since you are setting your own settings.....

    You test out Performance Enhance Turbo or Extreme yet? Just wondering

    Can you run tRD 7, I mean did you try at all?

    Your clocks as is could be improved by making these changes >>
    tRRD ------------------------ 4 ------ : [ 4] 3 no go? Just checkin
    tWTR ------------------------ 4 ------ : [ 4] 3 no go? Just checkin
    tWR -------------------------- 13 ------ : [ 13] << Test 6-10
    tRFC ------------------------ 68 ------ : [ 68] << Test 54-58
    tRTP ------------------------ 4 ------ : [ 4] << Set 3

  6. #16
    FlyingHorse's Avatar
    FlyingHorse is offline Junior Member
    Join Date
    Jul 2009
    Location
    3359'43.1"N, 8409'03.1"W, 1058FT
    Posts
    41

    Default Re: EP45-UD3P: Help with re-boot issues

    Quote Originally Posted by Lsdmeasap View Post
    Yes XMP = Disabled

    Since you are setting your own settings.....
    Was running Disabled earlier, looks like I forgot to set it back

    Quote Originally Posted by Lsdmeasap View Post
    You test out Performance Enhance Turbo or Extreme yet? Just wondering
    Both caused errors for me in Windows testing.

    Quote Originally Posted by Lsdmeasap View Post
    Can you run tRD 7, I mean did you try at all?
    tRD=7 is a no go for me. Causes BIOS Boot Loops.

    Quote Originally Posted by Lsdmeasap View Post
    Your clocks as is could be improved by making these changes >>
    tRRD ------------------------ 4 ------ : [ 4] 3 no go? Just checkin
    tWTR ------------------------ 4 ------ : [ 4] 3 no go? Just checkin
    tWR -------------------------- 13 ------ : [ 13] << Test 6-10
    tRFC ------------------------ 68 ------ : [ 68] << Test 54-58
    tRTP ------------------------ 4 ------ : [ 4] << Set 3
    Will try these settings and see how things go.

    My main concern are the voltages especially CPU PLL (1.65). Also I have Load-Line Calibration Enabled and was wondering if this negates the Enhanced Halt States?
    Best regards,
    FlyingHorse

    GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10
    G.Skill F2-8800CL5Q-8GBPI (2GBx4) DDR2-1100
    EVGA 285GTX SSC Graphics + HP ZR24w + LG 32LH40
    HighPoint 2640x4 4-Port SAS RAID Controller
    Creative X-Fi ExtremeGamer Audio (PCI)
    Hauppauge WinTV-HVR 2250 Dual Digital Tuners
    2 WD 150GB Raptors RAID 0
    1 2TB Caviar Black

    3 1TB Caviar Blacks
    2 WD 500GB, 2 640GB, and 2 1TB Caviars in Icy Dock Mobile Racks
    LG GH22NS30 DVD Burner
    Lite-On iHOS104-08 Blu-ray Reader
    Corsair HX Series 1KW PSU
    Cooler Master ATCS 840 Full Tower
    Windows 8 Pro with Media Center

  7. #17
    FlyingHorse's Avatar
    FlyingHorse is offline Junior Member
    Join Date
    Jul 2009
    Location
    3359'43.1"N, 8409'03.1"W, 1058FT
    Posts
    41

    Default Re: EP45-UD3P: Help with re-boot issues

    Updated settings based on your suggestions:
    Code:
    Motherboard: EP45-UD3P Rev: 1.1
    BIOS Version: F10e
    CPU: Intel Q9650
    RAM: G.Skill F2-8800CL5Q-8GBPI (4x2GB)
         http://www.gskill.com/products.php?index=165
    PSU: Silverstone, ST75ZF, 750W
    GPU: EVGA 285GTX SSC Stock
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ---------------- : [Turbo]
    CPU Clock Ratio ------------------------ : [ 9x]
    Fine CPU Clock Ratio ------------------- : +0.0
    CPU Frequency ---------------------------: 4.05GHz( 450x9)
    
    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control ----------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------- : [ 450]
    PCI Express Frequency (Mhz) ------------ : [100]
    C.I.A.2 -------------------------------- : [Disabled]
    
    >>>>> Advanced Clock Control
    Advanced Clock Control ----------------- : [Press Enter]
    CPU Clock Drive ------------------------ : [ 800mV]
    PCI Express Clock Drive ---------------- : [ 900mV]
    CPU Clock Skew (ps) -------------------- : [   0ps]
    MCH Clock Skew (ps) -------------------- : [   0ps]
    
    ******** DRAM Performance Control ********
    Performance Enhance -------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) ---- : [Disabled]
    (G)MCH Frequency Latch ----------------- : [Auto]
    System Memory Multiplier (SPD) --------- : [2.40B]
    Memory Frequency (Mhz) ------ 1066 ----- :  1080
    DRAM Timing Selectable ----------------- : [Manual]
    
    >>>>> Standard Timing Control
    CAS Latency Time -------------  5 ------ : [5]
    tRCD  ------------------------  7 ------ : [   5]
    tRP --------------------------  7 ------ : [   5]
    tRAS  ------------------------ 20 ------ : [  15]
    
    >>>>> Advanced Timing Control
    Advanced Timing Control ---------------- : [Press Enter]
    tRRD  ------------------------  4 ------ : [   3]
    tWTR  ------------------------  4 ------ : [   3]
    tWR --------------------------  8 ------ : [   6]
    tRFC  ------------------------ 68 ------ : [  54]
    tRTP  ------------------------  4 ------ : [   3]
    Command Rate (CMD) -----------  0 ------ : [   2]
    
    >>>>> Channel A and Channel B
    Channel A & B Timing Settings ---------- : [Press Enter]
    Static tRead Value -----------  8 ------ : [   8]
    tRD Phase0 Adjustment --------  0 ------ : [Auto]
    tRD Phase1 Adjustment --------  0 ------ : [Auto]
    tRD Phase2 Adjustment --------  0 ------ : [Auto]
    tRD Phase3 Adjustment --------  0 ------ : [Auto]
    
    Trd2rd(Different Rank) -------  8 ------ : [Auto]
    Twr2wr(Different Rank) -------  8 ------ : [Auto]
    Twr2rd(Different Rank) -------  7 ------ : [Auto]
    Trd2wr(Same/Diff Rank) -------  9 ------ : [Auto]
    
    Dimm1 Clock Skew Control --------------- : [Auto]
    Dimm2 Clock Skew Control --------------- : [Auto]
    DDR Write Training --------------------- : [Auto]
    
    Channel A & B Driving Settings --------- : [Press Enter]
    Driving Strength Profile --------------- : [1066MHz]
    
    Data Driving Pull-Up Level ------------- : [Auto]
    Cmd  Driving Pull-Up Level ------------- : [Auto]
    Ctrl Driving Pull-Up Level ------------- : [Auto]
    Clk  Driving Pull-Up Level ------------- : [Auto]
    
    Data Driving Pull-Down Level ----------- : [Auto]
    Cmd  Driving Pull-Down Level ----------- : [Auto]
    Ctrl Driving Pull-Down Level ----------- : [Auto]
    Clk  Driving Pull-Down Level ----------- : [Auto]
    
    ****** Motherboard Voltage Control ******
    >>> CPU
    Load-Line Calibration ------------------ : [Enabled]
    CPU Vcore -------------- 1.28750V  ----- : [1.38125V]
    CPU Termination ---------- 1.200V ------ : [1.300V]
    CPU PLL ------------------ 1.500V ------ : [1.650V]
    CPU Reference ------------ 0.760V ------ : [0.823V]
    
    >>> MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.240V]
    MCH Reference ----------- 0.760V ------- : [0.863V]
    MCH/DRAM Reference ------ 0.900V  ------ : [0.960V]
    ICH I/O ----------------- 1.500V ------- : [1.500V]
    ICH Core ---------------- 1.100V ------- : [1.100V]
    
    >>> DRAM
    DRAM Voltage ------------ 1.800V ------- : [1.920V]
    DRAM Termination -------- 0.900V ------- : [0.960V]
    Channel A Reference ----- 0.900V ------- : [0.960V]
    Channel B Reference ----- 0.900V ------- : [0.960V]
    
    Advanced BIOS Features
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Enabled]
    C2/C2E State Support ------------------- : [Enabled]
    C4/C4E State Support ------------------- : [Enabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Enabled]
    
    Integrated Peripherals
    USB Storage Function ------------------- : [Enabled]
    Here are the results:


    As for the the improvements:


    Not bad actually. I've yet to run lengthy stability tests but hopefully these settings will hold. Thanks for the feedback.
    Best regards,
    FlyingHorse

    GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10
    G.Skill F2-8800CL5Q-8GBPI (2GBx4) DDR2-1100
    EVGA 285GTX SSC Graphics + HP ZR24w + LG 32LH40
    HighPoint 2640x4 4-Port SAS RAID Controller
    Creative X-Fi ExtremeGamer Audio (PCI)
    Hauppauge WinTV-HVR 2250 Dual Digital Tuners
    2 WD 150GB Raptors RAID 0
    1 2TB Caviar Black

    3 1TB Caviar Blacks
    2 WD 500GB, 2 640GB, and 2 1TB Caviars in Icy Dock Mobile Racks
    LG GH22NS30 DVD Burner
    Lite-On iHOS104-08 Blu-ray Reader
    Corsair HX Series 1KW PSU
    Cooler Master ATCS 840 Full Tower
    Windows 8 Pro with Media Center

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P: Help with re-boot issues

    Ahh sorry to have missed your PLL, yes you should be using less if you can.

    LLC will not affect the Halt states, and will be fine to use as long as you are not using insane voltages... which you aren't

    Looks good

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •