Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ




  1. #21
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    200Mhz X 12 cpu clock ratio = 2400Mhz OC 267Mhz x 12 cpu clock ratio = 3204Mhz
    200Mhz FSB memory clock x3.33=667DDR OC 267Mhz FSB memory clock x3.33=890DDR
    http://www.youtube.com/watch?v=bBGf3k2ANFw

    You are pushing OC to high for CPU or to much FSB for memory. Please check your cpu-z.
    You should loosen timings more.
    What is your cpu-z 1.5?
    Mine is 534.5Mhz X2 = 1069DDR click memory tab post here.----> CPUID

    By artdrivers at 2009-07-07
    click cpu tab post here.---->

    By artdrivers at 2009-07-07
    Run Memset 4.0 Post here-----> http://www.tweakers.fr/download/MemSet40.zip

    By artdrivers at 2009-06-28

    By artdrivers at 2009-06-29
    Last edited by artdrivers; 07-31-2009 at 09:55 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  2. #22
    Join Date
    Jul 2009
    Posts
    14

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    at me it after turning up on 267 fsb

  3. #23
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    memset4.0 shows 666Mhz ??? Problem Timmings 5-5-5-10 tRAS(10)problem
    DRAM auto values in bios are not any good for OC. DRAM 1.9v= problem
    FSB 267Mhz may be a little to ambitious.
    Memory QVL for GA-MA790X-DS4----->
    http://www.gigabyte.us/FileList/Memo...ma790x-ds4.pdf
    Last edited by artdrivers; 07-31-2009 at 08:05 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  4. #24
    Join Date
    Jul 2009
    Posts
    14

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    You can easily describe what and how do I set the BIOS?

  5. #25
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    Boot into bios delete key after you boot into bios the next 2 keys to hit are Ctrl+F1 at the same time or together. disable sb 600 spread spectrum & Northbridge control In the Main Menu, press CTRL+F1
    to access more advanced options. Then navigate to MB Intelligent Tweaker(M.I.T.) Then change the System Voltage Control change from auto to manual leave this on manual. Now select DDR voltage control. Increases memory voltage to +0.300V Hit F11 to Save CMOS to BIOS Set Memory Clock Now navigate to Set Memory clock change from Auto to Manual leave this on manual Set this at DDR800 You should try reducing the FSB 250Mhz Now Hit Esc. Save & Exit Setup
    Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup.
    Reboot enter bios navigate to DRAM Configuration DDRII Timing Items Change DDR timming items from Auto to manual. Now the only numbers to change will appear on the left the SPD and Auto values are for reference only.
    Try these---->
    x CAS# latency 5T
    x 1T/2T Command Timing 2T
    x TwTr Command Delay 3T
    x Write Recovery Time 5T
    x Precharge Time 3T
    x Row Cycle Time 20T
    x RAS to CAS R/W Delay 5T
    x RAS to RAS Delay 3T
    x Row Precharge Time 5T
    x Minimum RAS Active Time 15T
    Now Hit Esc. Save & Exit Setup Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup.
    (Pressing F10 can also carry out this task.)
    Now enter Bios again and see if these settings are still set. The only timing numbers that should change are the ones on the left the others are for reference only. Now run a memory tester. Memtest86+ V2.11 (22/12/2008)
    Download link----> Memtest86+ - Advanced Memory Diagnostic Tool
    When this has been performed with no errors you then should go into bios and Hit F11 to Save CMOS to BIOS.
    Last edited by artdrivers; 08-01-2009 at 01:09 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  6. #26
    Join Date
    Jul 2009
    Posts
    14

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    It on these settings is well and has not mistakes in memtest. What to make now in order to on larger fsb it was well ??

  7. #27
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Problem GA-MA790X-DS4 and PATRIOT VIPER 2x2GB 800 MHZ

    Good Job! Turn up FSB a little at a time until errors then set back a little when you reach the limit.
    Keep an I on heat. Post pictures.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •