Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 10 of 24 FirstFirst ... 8910111220 ... LastLast
Results 91 to 100 of 231

Thread: POST i7 CORE TEMPS HERE!!!




  1. #91

    Default Re: POST i7 CORE TEMPS HERE!!!

    hey all, just loaded F8a, its not power cycling, but just rebooting to bios . This is with my settings all updated in bios, just defaulted them again and its up now.

    Any idea why it would do this?
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  2. #92
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: POST i7 CORE TEMPS HERE!!!

    So you can't get in the BIOS or what? Sorry, you did not give enough info I think.

  3. #93

    Default Re: POST i7 CORE TEMPS HERE!!!

    Good Morning all, LsD, Its all working 100 % after a reboot at default , then did all my settings back to my sig now.

    Yea that QPI voltage, its still in increments of 1.48,1.5,1.48,1.5 . Weird huh? This is with the F8a bios so must be a board thing i guess , no big deal.

    I think i found the Lowest vcore, 1.29 in bios gives me a blue screen error- 124. Thats a QPI voltage error , not a vcore error.

    I upped vcore back to 1.3 in bios, gives me like 1.28 in windows. Nice n solid, just above stock voltage. I guess my chip isn't so bad afterall....

    LSD, what do u think of the QPI error it gives me when it should actually be "not enough vcore aka 101" ?
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  4. #94

    Default Re: POST i7 CORE TEMPS HERE!!!

    Oh yeah, i dunno if its me, but it does seem to post and boot up much faster. Before it was a drag, really slow, like i've heard from other gigabyte boards. Ill test it against my bro's computer with the F6 bios tonite
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  5. #95
    Join Date
    Jul 2009
    Location
    River Rouge, MI
    Posts
    57

    Default Re: POST i7 CORE TEMPS HERE!!!

    I've been doing some testing with a 21 multi and I can get the same OC with Slightly lower voltage. What options do I need to disable in bios to prevent cpu throttling? Are they CPU EIST function, CPU Enhanced Halt (C1E) and C3/C6/C7 state support?

  6. #96

    Default Re: POST i7 CORE TEMPS HERE!!!

    CPU EIST is Enhanced Intel Speed Throttling, disable this and your multi shall remain at the 21x constantly without adjusting the multiplier based on load.

    However i have a read somewhere that disabling this will also disable turboboost which gives you that 21x multi. I pretty much have everything disabled in the advanced bios except for the EIST. disabling should increase overclocking stability from what i know.

    Try it and see what happens, LSD should chime in anytime with some more experienced help.

    I have found that using the 19x multi with Turbo off gives me much more stability that using 21x, i used to use 1.45vcore and 1.4qpi to get 3.990 ghz ( 190x21) , but this was not stable

    With the 19x multi and 190blck, im at in bios - 1.3vcore 1.36qpi 1.64vdimm . This is 3.705 ghz and is the cleanest ill get. Temps Dont go over 62 with HT off. I dont video edit, i dont need it.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  7. #97

    Default Re: POST i7 CORE TEMPS HERE!!!

    hey all, just decided to try and go up and over 4ghz. Changed the blck 190x21, mem multi to 6 ,uncore to 12, qpi same at 36x. Upped my voltages to start and here we go again, constant power cycling. Fans spin up and lights come on for 3 seconds . Its cycled about 20+ times now, usually by now it would have loaded the secondary bios. I also loosened the mem timings to 9 9 9 28. Ima sit here and wait til it comes on.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  8. #98

    Default Re: POST i7 CORE TEMPS HERE!!!

    somebody tell me something!!! its never gotten this bad before! half hour ago my machine was just how i wanted it and now i decide to be a hero and play around a bit only to get this. bahumbug.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  9. #99

    Default Re: POST i7 CORE TEMPS HERE!!!

    nevermind fellas, just needed to short the jumper.... all is well.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  10. #100
    Join Date
    Jul 2009
    Location
    River Rouge, MI
    Posts
    57

    Default Re: POST i7 CORE TEMPS HERE!!!

    I almost RMA'd my MOBO because of a reboot cycling problem. A member on this forum (can't remember his name Gene something) told me it was indicative of a PSU problem. Sure enough switching PSU's solved the issue I was having. What type of PSU are you using?

    As for CPU throttling with turbo boost and a 21 multiplier, I ran i7 Turbo 6.5 alongside OCCT for 2 hours without any throttling. I'd like to thank unclewebb the author of i7 turbo as well as Real Temp for this very usefull program.



Page 10 of 24 FirstFirst ... 8910111220 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •