Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 10 of 10

Thread: how do you post bios settings




  1. #1

    Default how do you post bios settings

    OK i've seen posts with bios settings that you can scroll tru. HOW?
    i've got a gigabyte GA-EP45-UD3P mobo, gskill 2X2Gig ram, using vista32 home premium and having issues, so i need to let one of the experts take a look at my settings.
    thanks

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: how do you post bios settings

    Assuming you have your settings in a text file, in notepad (or any of your favorite text editor) select all text and copy, in the post editor click the # icon, the cursor will be placed between the code tags, press ctrl+v to paste, you're done.
    Type all other text outside the code tags.

  3. #3
    Join Date
    Mar 2009
    Posts
    22

    Default Re: how do you post bios settings

    Just like this. Be sure to add the code in brackets at the beginning and end of you post. [code] [ /code ] only don't have any spaces between the brackets and words. i had to do it this way or it would not show


    [code] **** MB Intelligent Tweaker(M.I.T.) ****
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [9x]
    Fine CPU Clock Ratio ..................: This is not there
    CPU Frequency .........................: 3.4GHz (378x9) both are shaded out


    *******Clock Chip Control********
    >>>>>Standard Clock Control
    CPU Host Clock Control ................: [Enabled]
    CPU Host Frequency (Mhz) ..............: [ 378]
    PCI Express Frequency (Mhz) ...........: [100]
    C.I.A.2 ...............................: [Disabled]

    >>>>Advanced Clock Control
    Advanced Clock Control ................: [Press Enter]
    CPU Clock Drive .......................: [800mV]
    PCI Express Clock Drive ...............: [900mV]
    CPU Clock Skew (ps) ...................: [0ps]
    MCH Clock Skew (ps) ...................: [0ps]


    [B]******DRAM Performance Control********
    Performance Enhance ...................: [STANDARD]
    Extreme Memory Profile (X.M.P.) .......: [auto]
    (G)MCH Frequency Latch.................: [Auto]
    System Memory Multiplier ..............: [3.00A]
    Memory Frequency (Mhz) .......... 1066 : [1134] both are shaded out
    DRAM Timing Selectable ................: [Manual]

    >>>>>Standard Timing Control
    CAS Latency Time .................. 5 .: 5
    tRCD .............................. 5 .: 5
    tRP'............................... 5 .: 5
    tRAS ............................. 15 .: 15

    >>>>>Advanced Timing Control
    Advanced Timing Control ...............: [Press Enter]
    tRRD .............................. 4 .: 4

    tWTR .............................. 4 .: 6
    tWR .............................. 13 .: 8
    tRFC ............................. 68 .: 62
    tRTP .............................. 4 .: 6
    Command Rate (CMD) ................ 0 .: 2

    >>>>> Channel A
    Channel A Timing Setting ..............: [Press Enter]
    Static tRead Value ............... 10 .: 10
    tRD Phase0 Adjustment ............. 0 .: Auto - Both shaded out)
    tRD Phase1 Adjustment ............. 0..: Auto - Both shaded out)
    tRD Phase2 Adjustment ............. 0..: Auto - Both shaded out)
    tRD Phase3 Adjustment ............. 0..: Auto - Both shaded out)

    Trd2rd(Different Rank) ............ 8 .: Auto - both are shaded out)
    Twr2wr(Different Rank) ............ 8 .: Auto - both are shaded out)
    Twr2rd(Different Rank) ............ 7 .: Auto - both are shaded out)
    Trd2wr(Same/Diff Rank) ............ 9 .: Auto - both are shaded out)

    Dimm1 Clock Skew Control ..............: Auto - shaded out
    Dimm2 Clock Skew Control ..............: Auto - shaded out
    DDR Write Training ....................: Auto - shaded out

    >>>>>> Channel A
    Channel A Driving Settings ............: [Press Enter]
    Driving Strength Profile ..............: 1066
    Data Driving Pull-up Level ............: Auto - shaded out
    Cmd Driving Pull-up Level .............: Auto - shaded out
    Ctrl Driving Pull-up Level ............: Auto - shaded out
    Clk Driving Pull-up Level .............: Auto - shaded out

    Data Driving Pull-Down Level ..........: Auto - shaded out
    Cmd Driving Pull-Down Level ...........: Auto - shaded out
    Ctrl Driving Pull-Down Level ..........: Auto - shaded out
    Clk Driving Pull-Down Level ...........: Auto - shaded out

    **** Channel B Timing Setting ****
    Static tRead Value ............... 10 .: 10
    tRD Phase0 Adjustment ............. 0 .: Auto - shaded out
    tRD Phase1 Adjustment ............. 0 .: Auto - shaded out
    tRD Phase2 Adjustment ............. 0 .: Auto - shaded out
    tRD Phase3 Adjustment ............. 0 .: Auto - shaded out

    Trd2rd(Different Rank) ............ 8 .: Auto - both are shaded out
    Twr2wr(Different Rank) ............ 8 .: Auto - both are shaded out
    Twr2rd(Different Rank) ............ 7 .: Auto - both are shaded out
    Trd2wr(Same/Diff Rank) ............ 9 .: Auto - both are shaded out

    Dimm1 Clock Skew Control ..............: Auto - shaded out
    Dimm2 Clock Skew Control ..............: Auto - shaded out
    DDR Write Training ....................: Auto - shaded out

    >>>>> Channel B
    Channel B Driving Settings ............: [Press Enter]
    Driving Strength Profile ..............: 1066

    Data Driving Pull-up Level ............: Auto - shaded out
    Cmd Driving Pull-up Level .............: Auto - shaded out
    Ctrl Driving Pull-up Level ............: Auto - shaded out
    Clk Driving Pull-up Level .............: Auto - shaded out

    Data Driving Pull-Down Level ..........: Auto - shaded out
    Cmd Driving Pull-Down Level ...........: Auto - shaded out
    Ctrl Driving Pull-Down Level ..........: Auto - shaded out
    Clk Driving Pull-Down Level ...........: Auto - shaded out

    *****Motherboard Voltage Control*****
    Voltage Type.............Normal .......: [Current]

    >>>CPU
    Load-Line Calibration .................: [Enabled]
    CPU Vcore ............. 1.32500V ......: [1.42500V]
    CPU Termination ....... 1.200V ........: [1.260V]
    CPU PLL ............... 1.500V ........: [1.570V]
    CPU Reference ......... 0.760V ........: [Auto]

    >>> MCH/ICH
    MCH Core .............. 1.100V ........: [1.340V]
    MCH Reference ......... 0.760V ........: [Auto]
    MCH/DRAM Ref .......... 0.900V ........: [Auto]
    ICH I/O ............... 1.500V ........: [1.570V]
    ICH Core .............. 1.100V ........: [1.200V]

    >>> DRAM
    DRAM Voltage .......... 1.800V ........: [2.120V]
    DRAM Termination ...... 0.900V ........: [Auto]
    Channel A Reference ... 0.900V ........: [Auto]
    Channel B Reference ... 0.900V ........: [Auto]

    Advanced Settings
    Password check.........................: [setup]
    HD S.M.A.R.T. Capability...............: [Enabled]
    CPU Multi-Threading....................: [Enabled]
    Limit CPUID Max. to 3 .................: [Disabled]
    No-Execute Memory Protect .............: [Enabled]
    CPU Enhanced Halt (C1E) ...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]
    Delay For HDD (Secs)...................: [0]
    Full screan Logo Show..................: [Enabled]
    Init Display First.....................: [PEG]

    Integradted Peripherals
    Sata Raid/ACHI Mode....................: [Disabled]
    Sata Port0-3 Native Mode...............: [Disabled]
    Azalia Codec...........................: [Auto]
    Onboard H/W 1394.......................: [Enabled]
    Onboard H/W Lan1.......................: [Enabled]
    Onboard H/W Lan2.......................: [Enabled]
    Green Lan..............................: [Disabled]
    Smart Lan1.............................:
    Smart Lan2.............................:
    Onboard Lan1 Boot Rom..................: [Disableed]
    Onboard Lan2 Boot Rom..................: [Disableed]
    Onboard Sata/Ide Device................: [Enabled]
    Onboard Sata/Ide CTRL Mode.............: [AHCI]
    Onboard Serial Port 1..................: [3F8/IRQ4]
    Onboard Serial Port....................: [378/IRQ7]
    Parallel Port Mode.....................: [SPP]
    USB 1.0 Controller.....................: [Enabled]
    USB 2.0 Controller.....................: [Enabled]
    USB Keyboard Function..................: [Enabled]
    USB Mouse Function.....................: [Enabled]
    USB Storage Function...................: [Enabled]

    Power Managment Setup
    ACPI Suspend Type......................: [S3(STR)]
    Soft-Off by PWR-BTTN...................: [Instant-Off]
    PME Event Wake Up......................: [Enabled]
    Power On by Ring.......................: [Enabled]
    Resume by Alarm........................: [Disabled]
    HPET Support...........................: [Enabled]
    HPET Mode..............................: [32-Bit Mode]
    Power On by Mouse......................: [Disabled]
    Power On by Keyboard...................: [Disabled]
    AC Back Function.......................: [Soft-Off]

    PnP/PCI Configurations
    PCI! IRQ Assignment....................: [Auto]
    PCI@ IRQ Assignment....................: [Auto]

    PC Health Status
    CPU Warning Temperature................: [Disabled]
    CPU Fan Fail Warning...................: [Disabled]
    System Fan2 Fail Warning...............: [Disabled]
    Power Fan Fail Wrning..................: [Disabled]
    System Fan1 Fail Warning...............: [Disabled]
    CPU Smart Fan Control..................: [Disabled]
    CPU Smart Fan Mode.....................: [Auto][ /code ] no spaces
    Last edited by dido41; 08-06-2009 at 07:25 AM.
    CPU: i7 920 - Lapped - @ 4.0ghz
    Board: Asus P6X58D bios 703
    RAM: Mushkin redline 6.7.6.18 6GB
    Graphics: EVGA GTX 275 896MB 448-Bit DDR3
    LCD: HannSpree 25" HF257
    PSU: CORSAIR 650W ATX12V 80 PLUS Certified
    CPU Cooler: CORSAIR H50- Lapped
    HDD1: WD Caviar Black WD6402AAEX 640GB 64MB SATA 6.0Gb
    HDD2: WD Caviar Black WD6402AAEX 640GB 64MB SATA 6.0Gb
    DVD:LG Black DVD Burner With LightScribe
    Case: Antec Nine Hundred
    OS: Windows 7 64 bit




    EVGA GTX 275 896MB
    CORSAIR 650W

    WD Caviar Black 500GB
    LG Black DVD
    Antec 900
    Win 7 64



  4. #4
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: how do you post bios settings

    Or you can click the # icon when writing your post and past it in between the code brackets.

    Here's a template for your convenience.

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio.............................: 8 x
    Fine CPU Clock Ratio.....................:.+0.5
    CPU Frequency ...........................: 2.83GHz
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (MHz) ............: Auto
    PCI Express Frequency (MHz) .........:Auto 
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 
    PCI Express Clock Drive.................: 
    CPU Clock Skew (ps)....................: 
    MCH Clock Skew (ps)...................: 
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Auto]
    Memory Frequency (MHz) ..............: 1066
    
    DRAM Timing Selectable ................: [Auto]
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18
    Advanced Timing Control
    tRRD...........................................Auto
    tWTR..........................................Auto
    tWR............................................Auto
    tRFC...........................................Auto
    tRTP...........................................Auto
    Command Rate (CMD) ....................:Auto
    
    Channel A
    Static tRead Value.........................:Auto
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................:Auto
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    CPU
    CPU Vcore….……….........................:Auto <<<WHATEVER p in put is default your here<> 
    CPU Termination…..... 1.200V ...........:Auto
    CPU Reference.…………....0.820V*.......:Auto
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.100V 
    MCH/DRAM Ref.…......0.750V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto
    DRAM
    DRAM Voltage ……....1.800V............:  Set to what's listed on side of ram
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
    Last edited by Conners; 08-06-2009 at 07:23 AM.

  5. #5

    Default Re: how do you post bios settings

    Quote Originally Posted by Chike View Post
    Assuming you have your settings in a text file, in notepad (or any of your favorite text editor) select all text and copy, in the post editor click the # icon, the cursor will be placed between the code tags, press ctrl+v to paste, you're done.
    Type all other text outside the code tags.
    Well... lets assume that I don't have a clue how to how to get the settings in a text file, Lol (I guess you can tell I'm not very computer literate) could I use prt scrn while in the bios? Be patient i,ll get there!

  6. #6
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: how do you post bios settings

    You know how to copy and paste don't you.

  7. #7
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: how do you post bios settings

    Quote Originally Posted by groundpounder View Post
    Well... lets assume that I don't have a clue how to how to get the settings in a text file, Lol (I guess you can tell I'm not very computer literate) could I use prt scrn while in the bios? Be patient i,ll get there!
    LOL well you asked how to post not how to copy.
    No printscreen won't work in BIOS but you can take pictures of the BIOS settings.
    Find a matching tamplate for your board, left-click inside the template before the 1st letter and drag the cursor down untill the whole text inside the template is selected, press ctrl+c, or right-click the hilited text and select copy from the popup menu, open notepad, press ctrl+v, raplace the values with your own and save.
    Go to post #2.

  8. #8

    Default Re: how do you post bios settings

    Quote Originally Posted by Chike View Post
    LOL well you asked how to post not how to copy.
    No printscreen won't work in BIOS but you can take pictures of the BIOS settings.
    Find a matching tamplate for your board, left-click inside the template before the 1st letter and drag the cursor down untill the whole text inside the template is selected, press ctrl+c, or right-click the hilited text and select copy from the popup menu, open notepad, press ctrl+v, raplace the values with your own and save.
    Go to post #2.
    OK... everythings clear now I was under the impression that you could actually do it from the bios. Thanks for the help!

  9. #9
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: how do you post bios settings

    No but I wish? hundreds and hundreds of dollars on your computer and you still gotta use a pencil and paper. LOL
    Last edited by artdrivers; 08-07-2009 at 11:38 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  10. #10
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: how do you post bios settings

    Actually you can take a picture and convert it to text with OCR software.
    There are software that read BIOS settings, like EasyTune and MemSet, so in principle it is possible.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •