Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Too Mnay characters error




  1. #1
    Join Date
    Aug 2009
    Posts
    17

    Default Too Mnay characters error

    i got this error

    The text that you have entered is too long (42188 characters). Please shorten it to 10000 characters long.

    when i tried to reply to a post with my bios template info... even after i chopped it down... no way i was anywhere near that many... any ideas?
    My Rig:
    CPU: Intel E8400 Wolfdale
    Mobo: Gigabyte EP45-UD3P Rev. A3
    Bios: F8
    Power: OCZ 600 Stealth ExtremeRAM: OCZ DDR2 PC-8500 2x2Gig
    Gfx: Xfx 9800 GTX+
    Heatsink:
    Tuniq Tower 120

  2. #2
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Too Mnay characters error

    That just means that you have more spaces, dots, letters numbers, and so on that exceeds TT max of 10,000.

    Use this template and replace with your settings.

    BTW you don't need to post multiple times on the same thing....

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:  0.5
    CPU Frequency ...........................: MHz
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............:  Mhz
    PCI Express Frequency (Mhz) .........: 100
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 0ps 
    MCH Clock Skew (ps)...................: 0ps 
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 1000
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15
     
    Advanced Timing Control
    tRRD........................................... 4
    tWTR.......................................... 4
    tWR............................................ 8
    tRFC........................................... 52
    tRTP........................................... 4
    Command Rate (CMD) ....................: 2
     
    Driving Strength Profiles
    Driving Strength ............................: Auto
     
    Channel A
    Static tRead Value.........................: 9
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................: 9
     tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….......1.25000V.......: 
    CPU Termination…..... 1.200V*.......: 
    CPU PLL…………………....1.500V*.......: 
    CPU Referen.…………....0.755V*.......: 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: 
    MCH Reference….…….0.800V...........: 
    MCH/DRAM Ref.…......0.900V...........: 
    ICH I/O……………….....1.500V............: 
    ICH Core…………...……1.100V............: 
     
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: 
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] 
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]
    Last edited by Conners; 08-09-2009 at 10:46 AM.

  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Too Mnay characters error

    If you copy the text from word or wordpad thre post editor may insert control characters for font and styles that you don't see. Save the settings in a plain text file, open it with notepad select all text (ctrl+a) copy (ctrl+c), then click the # icon in post editor and paste (ctrl+v) it between the code tags.

  4. #4
    Join Date
    Aug 2009
    Posts
    17

    Default Re: Too Mnay characters error

    thanks... and didn't mean to double post
    My Rig:
    CPU: Intel E8400 Wolfdale
    Mobo: Gigabyte EP45-UD3P Rev. A3
    Bios: F8
    Power: OCZ 600 Stealth ExtremeRAM: OCZ DDR2 PC-8500 2x2Gig
    Gfx: Xfx 9800 GTX+
    Heatsink:
    Tuniq Tower 120

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •