Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Ex58-ud4p

  1. #1
    Join Date
    Dec 2008

    Default Ex58-ud4p

    Does the plate on bottom of board (for waterblock) stay on if just using fan? My fan bracket in on but not exactly flat?

  2. #2
    Join Date
    Jun 2009

    Default Re: Ex58-ud4p

    I am not aware that it is for a waterblock. I have water cooling and the bracket I use for the block is the same as I would use for a fan/heatsink. Your bracket should fit neatly over that plate.
    i7 920 DO @ 4410 210*21 Watercooled
    Gigabyte GA-Ex58 ud4p
    3X2gb Mushkin DDR3 1600
    2x4870 1GB Ati Crossfire.
    Intel X-25M SSD OS drive
    G.Skill Titan 128gb SSD X2 RAID 0 Data
    Corsair HX850 PSU
    Windows 7 x64 7600

  3. #3
    Join Date
    Apr 2009

    Default Re: Ex58-ud4p

    I would clean all the thermal lubricant off of that cpu and waterblock with some 91% rubbing alcohol and run a piece of sandpaper over the flat side of the waterblock. Clean again with rubbing alcohol and add new thermal lubricant. Then check it for a flush seat again.
    Last edited by artdrivers; 08-09-2009 at 11:26 PM.
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts