Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: Question for other EP45-UD3P owners who hit 500FSB and above




  1. #1
    Join Date
    Aug 2008
    Posts
    615

    Default Question for other EP45-UD3P owners who hit 500FSB and above

    I just wanted to check what kind of voltages are you using for stable 500FSB configuration (anything above is welcome too).
    Could you post your templates? Just the last part from bottom of M.I.T. section if possible. I am also interested in memory straps you use.
    Thanks!
    Last edited by Octopuss; 08-10-2009 at 01:30 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    Did you do a search for UD3P yet? If not I would suggest that, do an advanced search, then choose by titles only and then enter UD3P and or *-UD3P and you should have plenty of posts with settings used.

    500 FSB is often of course in the upper ranges of voltages, so you may need to turn your CPU fan up a bit Just kidding around cause I see you have "Slow" in your signature on it

  3. #3
    Join Date
    Aug 2008
    Posts
    615

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    There's LOADS of UD3P threads around here! :) I saw several, but it is loads of text. It's not laziness, I just find it better this way rather than browsing throught maybe hundreds of posts :P

  4. #4
    Join Date
    May 2009
    Location
    Canada
    Posts
    178

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    Code:
    E8400 500 X 8.5 = 4250 MHz F9 BIOS
    
    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ 0.5 ]
    CPU Frequency 4.25GHz............................[500 x 8.5]
    
    ******Clock Chip Control******
    
    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 500 ]
    PCI Express Frequency (Mhz).....................[ 100 ] 
    C.I.A 2 ........................................[Disabled]
    
    ******Advanced Clock Control******
    
    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]
    
    ******DRAM Performance Control******
    
    Performance Enhance ............................[Standard]
    Extreme Memory Profile (XMP)....................[ Disabled ]
    (G) MCH Frequency Latch.........................[ auto ] 
    System Memory Multipler.........................[ 2.00D ]
    Memory Frequency 1066...........................[ 1000]
    DRAM Timing Selectable..........................[ Manual ]
    
    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 5 ]
    tRP.............................................[ 5 ]
    tRAS............................................[ 15 ]
    
    ******Advanced Timing Control******
    
    tRRD............................................[Auto]
    tWTR............................................[Auto]
    tWR.............................................[Auto]
    tRFC............................................[Auto] 
    tRTP............................................[Auto]
    Command Rate (cmd)..............................[ 2 ] 
    
    
    **************************************
    
    Driving Strength Profiles
    Driving Strength ...............................[ 1066 ]  
    
    Channel A
    Static tRead Value..............................[ 11 ]  
    tRD Phase0 Adjustment...........................[Auto]
    tRD Phase1 Adjustment...........................[Auto]
    tRD Phase2 Adjustment ..........................[Auto]
    tRD Phase3 Adjustment...........................[Auto]
    
    Trd2rd(Different Rank)..........................[Auto]
    Twr2wr(Different Rank)..........................[Auto]
    Twr2rd(Different Rank)..........................[Auto]
    Trd2wr(Same/Diff Rank)..........................[Auto]
    
    Dimm1 Clock Skew Control........................[Auto]
    Dimm2 Clock Skew Control........................[Auto]
    DDR Write Training..............................[Auto]
    
    Channel B
    Static tRead Value..............................[ 11 ]  
    tRD Phase0 Adjustment...........................[Auto]
    tRD Phase1 Adjustment...........................[Auto]
    tRD Phase2 Adjustment ..........................[Auto]
    tRD Phase3 Adjustment...........................[Auto]
    
    Trd2rd(Different Rank)..........................[Auto]
    Twr2wr(Different Rank)..........................[Auto]
    Twr2rd(Different Rank)..........................[Auto]
    Trd2wr(Same/Diff Rank)..........................[Auto]
    
    Dimm1 Clock Skew Control........................[Auto]
    Dimm2 Clock Skew Control........................[Auto]
    DDR Write Training..............................[Auto]
    
    ******Motherboard Voltage Control******
    
    Load-Line Calibration ..........................[Disabled]
    CPU Vcore [ 1.175 ].............................[ 1.2875 ]
    CPU Termination [ 1.20 ]........................[ 1.240 ] 
    CPU PLL [ 1.50 ]................................[ 1.50 ] 
    CPU Reference [ 0.760 ].........................[ 0.770 ] 
    
    MCH Core [1.1 ].................................[ 1.220]
    MCH Reference [0.760 ]..........................[ 0.745 ]
    MCH/DRAM Refernce [0.900 ]......................[ 1.00 ] 
    ICH I/O [1.500 ]................................[ 1.50 ]
    ICH Core [1.100 ]...............................[ 1.10 ]
    
    DRAM Voltage [1.800 ]...........................[ 2.00 ] 
    DRAM Termination [0.900 ].......................[ 1.00 ] 
    Channel A Ref [0.900 ]..........................[ 1.00 ] 
    Channel B Ref [0.900 ]..........................[ 1.00 ] 
    
    ******Advanced BIOS Features******
    
    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Enabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Enabled ] 
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Disabled ]
    
    *******************************************
    1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @445x9@1.2625v bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
    2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @500x8.5@1.2875v bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
    3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @190x20@1.30625v bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
    4) Asus P8Z68-V Pro (bios 0801), i5-2500K @44x100@1.248v cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.


  5. #5

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    I have benched upto 550FSB so far, plenty of info in my "Wont boot above 450FSB" thread (Will post the link when I get home if you like)..
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  6. #6
    Join Date
    Aug 2008
    Posts
    615

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    That one I actively check every day :D
    You are mad (and probably lick toads :D)

  7. #7

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    You been watching Eleventh Hour?

    I am currently testing 485x8.5 (I have upto 510x8 fully stable) and will see how high I can go with that multiplier before moving onto x9. I can boot and use 500x9 but it isn't Prime stable (yet).
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  8. #8
    Join Date
    Aug 2008
    Posts
    615

    Default Re: Question for other EP45-UD3P owners who hit 500FSB and above

    Quote Originally Posted by D-an-W View Post
    You been watching Eleventh Hour?
    nope, just read too many of Lsdme's posts lately :D

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •