Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 40

Thread: Problem with EX58-UD4P F9 Bios




  1. #11
    Join Date
    Aug 2009
    Posts
    23

    Default Re: Problem with EX58-UD4P F9 Bios

    Not stable. Even with 8-8-8-25. Freeze or restart.

    I've made a test with auto (10-11-11-25) sets and it was Prime stabil 5.5h long. It seems to be it's ram problem.

    Tried QPI V:1.395 with 7-7-7-24 means worker stopped with error after 30sec.

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem with EX58-UD4P F9 Bios

    QPI may need to be higher for your CPU then. Please post me those settings you tried that failed with 888-24/25 and 777-24 and I will advise back

  3. #13
    Join Date
    Aug 2009
    Posts
    23

    Default Re: Problem with EX58-UD4P F9 Bios

    Thanks Your patience!

    7-7-7-24-2 ; tRFC:94 ; QPI:1.395 ; QPIPLL:1.18 ; IOH Core:1.18 ; ICH Core:1.16
    Worker stopped by error after 3min 30sec.

    7-7-7-24-2 ; tRFC:94 ; QPI:1.435 ; QPIPLL:1.18 ; IOH Core:1.18 ; ICH Core:1.16
    Worker stopped by error after 4min

    8-8-8-24-2 ; tRFC:94 ; QPI:1.435 ; QPIPLL:1.18 ; IOH Core:1.18 ; ICH Core:1.16
    Freeze after 4min

    7-7-7-24-2 ; tRFC:94 ; QPI:1.435 ; QPIPLL:1.18 ; IOH Core:1.18 ; ICH Core:1.16 + tFAW:26
    Worker stopped by error after 12min
    Last edited by Kiki73; 08-20-2009 at 12:14 AM.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem with EX58-UD4P F9 Bios

    Try 777-24 with QPI/Vtt at 1.4-1.45, IOH 1.24 and QPI PLL 1.2-1.24 and see if that helps.

    If not, try uncore 2x+1 and 2x+2

  5. #15
    Join Date
    Aug 2009
    Posts
    23

    Default Re: Problem with EX58-UD4P F9 Bios

    7-7-7-24-2 ; QPI:1.455 ; QPIPLL:1.24 ; IOH Core:1.24 ; ICH Core:1.16
    Uncore 2x+1 (my standard setting)

    Freeze after 5min

    7-7-7-24-2 ; QPI:1.455 ; QPIPLL:1.24 ; IOH Core:1.24 ; ICH Core:1.16
    Uncore 2x+2

    Freeze after 5min (exactly when with +1)
    Last edited by Kiki73; 08-20-2009 at 01:32 AM.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem with EX58-UD4P F9 Bios

    Try Uncore normal 2x and 2x+2? Normal 2x may be best but I really need to see all your settings to advise, and know what ram you are using

  7. #17
    Join Date
    Aug 2009
    Posts
    23

    Default Re: Problem with EX58-UD4P F9 Bios

    For now tried with normal Uncore(16x=3200MHz), Uncore+1(17x=3400MHz), Uncore+2(18x=3600MHz) with 7-7-7-24-2 ; QPI:1.455 ; QPIPLL:1.24 ; IOH Core:1.24 ; ICH Core:1.16
    In every case it freeze after 5min

    My Rams link:
    http://www.ocztechnology.com/product...triple_channel

    I have the 3GB kit
    Last edited by Kiki73; 08-20-2009 at 01:54 AM.

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #19
    Join Date
    Aug 2009
    Posts
    23

    Default Re: Problem with EX58-UD4P F9 Bios

    Advanced CPU Features:
    CPU Clock Ratio ................................ [19x]
    Intel(R) Turbo Boost Tech .................. Disabled
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x17
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 200
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x8.0]
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:

    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 7
    tRCD ....................................... 7
    tRP ......................................... 7
    tRAS ....................................... 24

    ##Channel A Advanced Timing Control##
    tRC ........................................ Auto
    tRRD ....................................... Auto (6)
    tWTR ...................................... Auto
    tWR ........................................ Auto (12)
    tWTP ....................................... Auto (23)
    tWL ........................................ Auto
    tRFC ....................................... Auto (88)
    tRTP ....................................... Auto (6)
    tFAW ....................................... Auto (24)
    Command Rate (CMD) ................ 2

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................Auto (A51 B53 C53)



    Advanced Voltage Control:

    CPU

    Load Line Calibration ................. Enabled
    CPU Vcore ............................... 1.24375
    QPI/VTT Voltage 1.150v ............ 1.455
    CPU PLL 1.800v .......................1.8

    MCH/ICH
    PCIE 1.500v ...........................1.5
    QPI PLL 1.100v .......................1.24
    IOH Core 1.100v .....................1.24
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v ........................1.16

    DRAM
    DRAM Voltage 1.500v ..............1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]</pre>


    I don't know the [tRC] [tWTR] [tWL], because of these aren't in the Cpu-tweaker, and what is the Bios says simply false information about memory settings.
    Last edited by Kiki73; 08-20-2009 at 02:13 AM.

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem with EX58-UD4P F9 Bios

    So are you sure you don't just need more Vcore? Go ahead and see by setting the ram to 6x and uncore to 12-14x

    That is the only thing that looks like it may be off to me.

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •