Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 16 of 18 FirstFirst ... 61415161718 LastLast
Results 151 to 160 of 179

Thread: Overclocking the Gigabyte X58 UD4P




  1. #151
    Join Date
    Feb 2011
    Location
    Lima
    Posts
    18

    Default Re: Overclocking the Gigabyte X58 UD4P

    Quote Originally Posted by Lsdmeasap View Post
    Those aren't high voltages at all, it just shows you need a better cooler is all, or you do not have it fully installed (Loose or too much paste)
    Quote Originally Posted by wazza300 View Post
    I just though you might be able to lower voltages and temps a little,you want a top quality cooler like the. Prolimatech megahalems or the true 120,and two fans in push/pull,I use two fans on my cooler,you want to use top quality thermal paste like mx and tx 2 or 3,it will all help to lower CPU temps

    The thermal paste I have is the Tuniq TX2 which is not bad I think it is among one of the best as I said
    Now it's true I have only installed a fan on the cooler so it would have that tomorrow or tonight you esoty installing another fan to the famous push / pull
    Another thing I have not always had high temperatures that I have to consider factors such as temperature against ambient summer now in round 20 at 25c and above all in the room that is the pc is very hot so no air power is part of the pc is stuck in a wooden desk
    Mmmm otherwise thermal paste and apply it 2 years ago do not know if has something to do
    Well what I describe is what I have right now on the pc
    And what I do is change the fans that I came from stock in the case for a best to help remove hot air and the extra fan for the cooler unless you have another idea to help me I hope your answers
    Last edited by Lsdmeasap; 02-05-2011 at 05:51 PM.

  2. #152
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Overclocking the Gigabyte X58 UD4P

    Yes summer temperatures will affect things,tx doesn't need any cure time so it should be fine,you can leave a window slightly open I find it helps in summer and leave side panel off on really hot days,noctua make powerful silent fans and scythe but you might need fan controller with the scythe as they can be loud
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #153
    Join Date
    Feb 2011
    Location
    Lima
    Posts
    18

    Default Re: Overclocking the Gigabyte X58 UD4P

    Quote Originally Posted by wazza300 View Post
    Yes summer temperatures will affect things,tx doesn't need any cure time so it should be fine,you can leave a window slightly open I find it helps in summer and leave side panel off on really hot days,noctua make powerful silent fans and scythe but you might need fan controller with the scythe as they can be loud
    I forgot to mention that I have installed on the pc the NZXT Sentry 2, which controls all of the pc fans I have it 100%
    Last edited by Lsdmeasap; 02-05-2011 at 05:51 PM.

  4. #154
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking the Gigabyte X58 UD4P

    Please do not put flash codes in your replies, thanks :)

    TX-2 is good paste, I refer it over all others!

    I just think you need a larger cooler for your system, especially since it's warmer where you live.

  5. #155
    Join Date
    Feb 2011
    Location
    Lima
    Posts
    18

    Default Re: Overclocking the Gigabyte X58 UD4P

    if good was thinking about buying a new one as the Tuniq TX4
    For now not within my plans to buy a new cooler fans perhaps best buy for the cooler and the case
    now I've put a fan over the cooler fan to be dual check the temperature and if you really like about 5 degrees down

  6. #156
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #157
    Join Date
    Feb 2011
    Location
    Lima
    Posts
    18

    Default Re: Overclocking the Gigabyte X58 UD4P

    I rather do the oc intenet but in small amounts until you purchase a new thermal paste as the Tuniq TX4 and I have a small doubt about voltages for the oc to 3.0 ghz and so on for the vcore as not to start

    Escuchar
    Last edited by Lsdmeasap; 02-08-2011 at 02:58 PM.

  8. #158
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking the Gigabyte X58 UD4P

    What did I say about flash codes? Why do you keep putting them in your posts? If it's by accident some how that is fine, but please explain if so. If not, then stop it :)

    Code:
    < / OBJECT id=tts_flash codeBase=http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0 height=18 width=18 classid=clsid:D27CDB6E-AE6D-11cf-96B8-444553540000 > < / OBJECT / >

  9. #159
    Join Date
    Feb 2011
    Location
    Lima
    Posts
    18

    Default Re: Overclocking the Gigabyte X58 UD4P

    If by accident sorry was something else and put it there by mistake
    My only question is with which voltages for 3.0 and start going up and testing so far as it can reach temperatures kill me
    Another thing seeing maybe a possible replacement to my cooler
    what is the opinon for corsair h50?
    Last edited by k@non; 02-08-2011 at 08:11 PM.

  10. #160
    Join Date
    Jan 2011
    Location
    Toronto
    Posts
    4

    Default Re: Overclocking the Gigabyte X58 UD4P

    I have applied your settings below last night and have begun stress testing to see if im stable now. Thanks for your suggestions and Ill report back soon.

    Quote Originally Posted by Lsdmeasap View Post
    Yeap, 124 BSOD is QPI/Vtt, often too low.

    Try these and see how you get along.

    Note my mention of Fail Safe, you are using that so it's probably part of your issues.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Auto]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... (x17)  x16-18
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 190
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]  << You are using Fail Safe, please load optimized defaults, and save/apply/reboot BACK TO THE BIOS.   Once in the BIOS set your SATA/Disk settings again, then come set all the overclock settings you need.
    
    PCI Express Clock Drive ................... [700mV]  << You are using Fail Safe, please load optimized defaults, and save/apply/reboot BACK TO THE BIOS.   Once in the BIOS set your SATA/Disk settings again, then come set all the overclock settings you need.
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  << Extreme may be best
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ 27 Auto(Should be = tRAS + tRP or above for stability)
    tRRD .......................................4 Auto
    tWTR ...................................... 4 Auto(Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................8 Auto
    tWTP ....................................... 19 Auto (tWTP Must = tWR + tWL + 4)
    tWL ........................................ 7 Auto (tWL Must be CAS Latency -1)
    tRFC ....................................... 60 Auto
    tRTP ....................................... 4 Auto
    tFAW ...................................... 16 Auto
    Command Rate (CMD) ................ 1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 60 Auto
    
    B2B CAS Delay .......................... - Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore ............................... 1.425
    QPI/VTT Voltage 1.150v ............ 1.5 (have tried 1.36 to 1.5)  Ideal would be 1.25-1.45
    CPU PLL 1.800v .......................1.880
    
    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... 1.360  << 1.2 should be ok
    IOH Core 1.100v ..................... 1.260
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.1v ........................ 1.280  << 1.14-1.2 should be plenty
    
    DRAM
    DRAM Voltage 1.500v .............. 1.660
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

Page 16 of 18 FirstFirst ... 61415161718 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •