Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 18 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 179

Thread: Overclocking the Gigabyte X58 UD4P




  1. #31
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking the Gigabyte X58 UD4P

    Ahh, now that sounds more familiar

    My 920 is ES and has even Values only, but the W3520 I have is D0 but it also has only even values. I have the same board, so that is why 1.39 sounded odd to me, plus you left off the .005 I have not used a Retail 920 C0 or D0, maybe they are all like that though, just this ES and Xeon is limited to the even values as the 965 I have is not it has odd values and .005 increments.

    I think Gigabyte just has not added the smaller increments in yet for Xeon D0's as I would suspect them to also be able to use them since they are the same as 920 D0

  2. #32
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking the Gigabyte X58 UD4P

    Well, now then, can we approach 4.4Ghz to 4.6Ghz?? If so, how? Step up BCLK by 10Mhz and bump the vcore and QPI by .5v increments???

    Geez, I thought Skt. 775 was a learning curve.....




  3. #33
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking the Gigabyte X58 UD4P

    Well is your cooler up for it?

    YA 775 was easy, then came P45! HAHAHA

    Ahh, X58 is a breeze man, you just got to get the hang of it is all. You see my overclocks in the X58 overclock thread, all of them are on water unless otherwise stated, got 231 Bclk on water posted, and 5Ghz but that is on Dry Ice though, also 239 Blck Here is the thread >>
    http://forums.tweaktown.com/f69/post...0/index11.html

    More voltages is not always the answer, and can often hinder progress if you are not careful

    You at 4.2 now? If so give me your settings and I will advise back.

    You can play around easier in windows using Easytune and SetFSB, to better get an idea of what may be able to be set in the BIOS. Use Clock Generator ICS9LPRS916JGLF in set FSB
    Last edited by Lsdmeasap; 08-28-2009 at 04:32 PM.

  4. #34
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking the Gigabyte X58 UD4P

    Quote Originally Posted by Lsdmeasap View Post
    Well is your cooler up for it?
    You at 4.2 now? If so give me your settings and I will advise back.
    Got a nice water kit running on it, I can make it "chilly" pretty quick......triple 120MM fan rad setup...
    Running at those last settings you gave me, gives me 4.2 with CPU-Z in Windows.



  5. #35
    Join Date
    Jun 2009
    Posts
    91

    Default Re: Overclocking the Gigabyte X58 UD4P

    Lsd,
    I have my i7 920 DO overclocked to 4305 stable.
    Here are my settings:
    Multi 20 Turbo enabled
    bclk 205
    vCore 1.44
    Qpi/vtt 1.455
    CPU pll 1.84
    PCIE auto
    QPI pll 1.26
    IOH Core 1.24
    ICH i/o auto
    ICH Core auto
    vDimm 1.66

    I would like to get to 4400 but the vcore is already about as much as I want to try. It seems to me that I have too much vcore for a DO.
    I would appreciate any suggestions to get to 4400 at about the same vcore as I am at now. Am I where this chip is going to go or are there settings that I am missing that will get me higher without cooking something? My load temps are ~80c now. I am upgrading to a heatkiller which should give me a couple of degrees.
    I will appreciate any help.
    Thanks,
    Gene
    i7 920 DO @ 4410 210*21 Watercooled
    Gigabyte GA-Ex58 ud4p
    3X2gb Mushkin DDR3 1600
    2x4870 1GB Ati Crossfire.
    Intel X-25M SSD OS drive
    G.Skill Titan 128gb SSD X2 RAID 0 Data
    Corsair HX850 PSU
    Windows 7 x64 7600

  6. #36
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking the Gigabyte X58 UD4P

    Quote Originally Posted by Lsdmeasap View Post
    Don't even look on the left in the BIOS, it is irrelevant and incorrect

    Your BIOS recovered from the backup chip because your settings failed badly and corrupted the Main chip.

    You had 4.2 in windows due to Turbo being enabled.

    So have you flashed back to F10a yet? If not please do so and try these changes this time after your normal flash procedures

    QPI Link Speed .............................. x36
    Uncore Frequency .......................... X18 = 3600Mhz << Set x16 for now
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................200
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive .............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8.0]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................20


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore ...............................1.37500v
    QPI/VTT Voltage 1.150v ............1.355v << Set 1.38 to be sure this is not an issue
    CPU PLL 1.800v .......................Auto

    MCH/ICH
    PCIE 1.500v ...........................Auto
    QPI PLL 1.100v .......................Auto << Set 1.24-1.3
    IOH Core 1.100v .....................1.16v << Set 1.22-1.24
    ICH I/O 1.500v .......................Auto
    ICH Core 1.1v ........................Auto

    DRAM
    DRAM Voltage 1.500v ..............1.64 < Set 1.66
    Currently running at these settings.....water kit is tight, let's go!!


  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking the Gigabyte X58 UD4P

    Try these guys for 4.4

    QPI Link Speed .............................. x36
    Uncore Frequency .......................... X17-18
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................210
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive .............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8.0]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................20

    ^ if your ram can't hang with1680 at CAS 8, which it should be ok I would think, then set 9 for now until you can get it figured out

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore ...............................1.37500v << MORE :) (1.35-1.5+
    QPI/VTT Voltage 1.150v ............1.355v << Set 1.38-1.54+
    CPU PLL 1.800v .......................Auto << 1.84-1.88

    MCH/ICH
    PCIE 1.500v ...........................Auto << Set 1.54-1.58
    QPI PLL 1.100v .......................Auto << Set 1.24-1.36
    IOH Core 1.100v .....................1.16v << Set 1.24-1.32
    ICH I/O 1.500v .......................Auto <<< Set 1.5-1.58
    ICH Core 1.1v ........................Auto << Set 1.14-1.2

    DRAM
    DRAM Voltage 1.500v ..............1.64 < Set 1.66 << May need 1.68-1.72

  8. #38
    Join Date
    Jun 2009
    Posts
    91

    Default Re: Overclocking the Gigabyte X58 UD4P

    Thanks, I am stable at 4.4 albeit with ht off. I can get stable at 4.4 ht on but the vcore and temps are more than I like for 24/7.
    I relaxed timings per your recommendation at first but once everything seemed stable I went back to Mushkin's rated 6,7,6,18,1t and it is rock solid at 1680mhz. Mushkin rules!
    i7 920 DO @ 4410 210*21 Watercooled
    Gigabyte GA-Ex58 ud4p
    3X2gb Mushkin DDR3 1600
    2x4870 1GB Ati Crossfire.
    Intel X-25M SSD OS drive
    G.Skill Titan 128gb SSD X2 RAID 0 Data
    Corsair HX850 PSU
    Windows 7 x64 7600

  9. #39
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking the Gigabyte X58 UD4P

    Well, I'm trying and having no luck..... Tried many settings starting with these:

    Code:
    Gigabyte X58 UD4P
    BIOS F10a
    i7 920 D0 stepping
    3Gb Corsair Dominator TR3XG1600C8D G
    
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Disabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  (x18)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................210
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Expert]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................20
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  Auto = 27
    tRRD .......................................Auto = 4
    tWTR ...................................... Auto = 4
    tWR ........................................Auto = 8
    tWTP ....................................... Auto = 19
    tWL ........................................ Auto = 7
    tRFC .......................................80
    tRTP .......................................Auto = 4
    tFAW ......................................Auto = 20
    Command Rate (CMD) ................1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................Auto = 55
    
    Channels B & C same as above...
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore ...............................1.45
    QPI/VTT Voltage 1.150v ............1.455
    CPU PLL 1.800v .......................1.86
    
    MCH/ICH
    PCIE 1.500v ...........................1.56
    QPI PLL 1.100v .......................1.3
    IOH Core 1.100v .....................1.3
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v ........................1.16
    
    DRAM
    DRAM Voltage 1.500v ..............1.68
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by caintry_boy; 09-02-2009 at 06:56 AM.

  10. #40
    Join Date
    Jun 2009
    Posts
    91

    Default Re: Overclocking the Gigabyte X58 UD4P

    You might try disabling CPU multi-threading. Without it I am stable at 4.4 and 1.44v. With it on I would most likely need to run vcore well up past 1.5 and I really don't do anything that can benefit from HT.
    The only other answer I can see for you is more vCore.
    i7 920 DO @ 4410 210*21 Watercooled
    Gigabyte GA-Ex58 ud4p
    3X2gb Mushkin DDR3 1600
    2x4870 1GB Ati Crossfire.
    Intel X-25M SSD OS drive
    G.Skill Titan 128gb SSD X2 RAID 0 Data
    Corsair HX850 PSU
    Windows 7 x64 7600

Page 4 of 18 FirstFirst ... 2345614 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •