Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Gigabyte P45 UD3P + Q9550 "E0"




  1. #1
    Join Date
    Aug 2009
    Posts
    5

    Default Gigabyte P45 UD3P + Q9550 "E0"

    Hi,

    I have the folowing system:

    - Gigabyte P45 UD3P
    - Q6600 (sold)
    - Gskill 2x2gb PC8500 PK
    - 2x 4890 @ CrossfireX


    Tomorrow Im getting a Q9550 "E0" and I would like you to post some bios configuration files so I can achieve the 4ghz mark .

    Ive searched through the web but find almost anything.

    Thanks in advance!!

  2. #2
    Join Date
    Aug 2009
    Posts
    5

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    No one?!

  3. #3
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"



    People arent just hanging around waiting to reply to x fire 9550 posts but hey check thru this for lots of Q9550 settings:

    http://forums.tweaktown.com/f69/q955...500-fsb-32809/
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  4. #4
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    There are literally half a dozen posts in this very forum of various people with Q9550/Q9650 E0 CPU's hitting 4GHz +. As they're virtually identical CPU's the same basic principle applies with regards to possible max clocks and general trends in what settings effect stability etc.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #6
    Join Date
    Aug 2009
    Posts
    5

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    Ive already made it to 4ghz.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #8
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    Keep looking here and elsewhere and you'll find loads of possible profiles for up to ~4.35GHz to use as a base. Only use them for ideas based on what you found you needed for 4GHz though as every CPU is different.

    IMO there's nearly always a bit more to be pushed out of things, but weigh up the benefits vs the drawbacks. 4GHz is plenty enough CPU horsepower for things like gaming, but more for video encoding/transcoding would give you some visible benefit in completion time, even if it's only 5 minutes on a 4 hour encoding job etc.

    I'd say your twin 4890's are more than pleased with the amount of attention they're getting ie a good throughput of data.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  9. #9
    Join Date
    Aug 2009
    Posts
    5

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    For now, 4GHz is more than enough. Its summer and the temps arent really that good to OC.

    Still, 4GHz, is good I think.

    This is the settings that I used:

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte P45 UD3P + Q9550 "E0"

    I agree, 4Ghz is plenty for your CPU!! Many members here struggle to get 3.6 on those so you are doing just fine

    You left off your settings? Just a reminder, in case you wanted to post them to help others later on and forgot

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •