Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37

Thread: Paged Fault in Non Paged Are BSOD EP45-UD3p




  1. #21
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    You must use Memtest86+ 2.11 >>
    Memtest86+ - Advanced Memory Diagnostic Tool

    Please use that, test each stick one by one for 5-10 passes then if all is well put all your memory back in and check back here for settings to use/try.

    If you do need settings given to you, please let me know what FSB and ram speed you want to run

  2. #22
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    I would be happy at what ever would stabilize the machine. I bought the 1066 RAM because I thought it would be a good performance boost for the machine.

    I really am not looking to overclock the machine, so I would be looking for a good recommendation for solid performance and decent speed.

    Thanks!

    Frank

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Well please test your ram as mentioned above one by one so we can be sure you do not have faulty ram modules before going any further

  4. #24
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Working on that.

    Frank

  5. #25
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Ok I have checked out all sticks individual using Memtest and have gotten no errors.

    I am going to re-install all modules and then I will re-post where my settings in the BIOS are.

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #27
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Just an after thought, not only should you check out each stick but each memory slot also. Forgive me if this has already been done or mentioned.

  8. #28
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Here are current settings:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..............: Auto
    CPU Clock Ratio ......................: 8X
    Fine CPU Clock Ratio..................: .5
    CPU Frequency ........................: 2.83Ghz (333x8.5)
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control................: [Disabled] 
    CPU Host Frequency (Mhz) .............: 333
    PCI Express Frequency (Mhz) ..........: 100
    
    C.I.A.2 ..............................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive.......................: 800
    PCI Express Clock Drive...............: 900
    CPU Clock Skew (ps)...................: 0ps
    MCH Clock Skew (ps)...................: 0ps
    
    
    DRAM Performance Control
    Performance Enhance...................: Standard
    Extreme Memory Profile (X.M.P.).......: Auto
    (G)MCH Frequency Latch................: Auto
    System Memory Multiplier .............: Auto
    Memory Frequency (Mhz) ...............: 1066
    DRAM Timing Selectable ...............: Manual
    
    Standard Timing Control
    CAS Latency Time.......................: 5 
    tRCD ..................................: 6
    tRP'...................................: 6
    tRAS...................................: 18
    
    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................: 4 Auto
    tWTR...........................................: 4 Auto
    tWR............................................: 8 Auto
    tRFC...........................................: 68 Auto
    tRTP...........................................: 4 Auto
    Command Rate (CMD) ............................: 0 Auto
    
    Driving Strength Profiles
    Driving Strength ............................: 1066
    
    Channel A
    Static tRead Value.....................: Auto
    tRD Phase0 Adjustment..................: Auto <<< Leave for all below as well
    tRD Phase1 Adjustment..................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank).................: Auto 
    Twr2wr(Different Rank).................: Auto 
    Twr2rd(Different Rank).................: Auto 
    Trd2wr(Same/Diff Rank).................: Auto 
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps
    
    Channel B
    Static tRead Value.....................: Auto
    tRD Phase0 Adjustment..................: Auto <<< Leave for all below as well
    tRD Phase1 Adjustment..................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank).................: Auto 
    Twr2wr(Different Rank).................: Auto 
    Twr2rd(Different Rank).................: Auto 
    Trd2wr(Same/Diff Rank).................: Auto 
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….………........1.18750v......: Auto 
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*...........: Auto
    CPU Referen.…………....0.760V*.........: Auto
    
    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V.........: Auto
    ICH I/O……………….....1.500V...........: Auto
    ICH Core…………...……1.100V............: Auto
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.1V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V...........: Auto
    Channel B Reference 0.900V...........: Auto
    
    Advanced Settings
    Limit CPUID Max. to 3................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)..............: [Enabled]
    C2/C2E State Support.................: [Disabled]
    x C4/C4E State Support...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ..........: [Enabled]
    CPU EIST Function....................: [Enabled]
    Virtualization Technology............: [Enabled]
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  9. #29
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    BSOD immediately on re-boot with all modules in

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    MCH Voltage must be set with 4-8GB, as well as possibly Vtt

    Is that where you plan to keep your CPU? If so I can post back a full set of suggested settings for the Auto ones you listed

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •