Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37

Thread: Paged Fault in Non Paged Are BSOD EP45-UD3p




  1. #31
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Change extreme profile to Disabled
    Set System Memory Multiplier to 3.20B
    Set CAS Latency Time to 5
    Set tRCD to 5
    Set tRP' to 5
    Set tRAS to 15
    Set Command Rate (CMD) to 2
    Set Static tRead Value 9 or 8
    Set vcore to 1.18750v + 1 or 2 clicks testing
    Set MCH Core to 1.100V + 1 or 2 clicks testing
    CPU Enhanced Halt (C1E) to Disabled

    or is your timings 5-6-6-18?
    Last edited by Conners; 08-24-2009 at 03:57 AM.

  2. #32
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    What MCH Core settings have you tried so far with what results?
    If you had your system specs with the link to your ram web page or at least model number it would make things more clear.

  3. #33
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Yes planning on keeping CPU there.

    Thanks!

  4. #34
    Join Date
    Aug 2009
    Posts
    21

  5. #35
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    K, I would advise this then for now. You can try a bit higher ram speed later on if you like, but it may be more headaches then it is worth

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..............: Auto or Fast
    CPU Clock Ratio ......................: 8X
    Fine CPU Clock Ratio..................: .5
    CPU Frequency ........................: 2.83Ghz (333x8.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control................: [Disabled]
    CPU Host Frequency (Mhz) .............: 333
    PCI Express Frequency (Mhz) ..........: 100

    C.I.A.2 ..............................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive.......................: 800
    PCI Express Clock Drive...............: 900
    CPU Clock Skew (ps)...................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: Standard
    Extreme Memory Profile (X.M.P.).......: Auto << Disabled
    (G)MCH Frequency Latch................: Auto
    System Memory Multiplier .............: Auto << 2.40B
    Memory Frequency (Mhz) ...............: 800
    DRAM Timing Selectable ...............: Manual

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 6
    tRP'...................................: 6
    tRAS...................................: 18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................:3-4
    tWTR...........................................:4-8
    tWR............................................: 6-10
    tRFC...........................................: 54-72
    tRTP...........................................: 3/4-5
    Command Rate (CMD) ............................: 2
    Driving Strength Profiles
    Driving Strength ............................: 1066 << leave, this often is best even at 800. If things fail then you can set 800 though

    Channel A
    Static tRead Value.....................: 7-9
    tRD Phase0 Adjustment..................: Auto <<< Leave for all below as well
    tRD Phase1 Adjustment..................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank).................: Auto
    Twr2wr(Different Rank).................: Auto
    Twr2rd(Different Rank).................: Auto
    Trd2wr(Same/Diff Rank).................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Channel B
    Static tRead Value.....................: 7-9
    tRD Phase0 Adjustment..................: Auto <<< Leave for all below as well
    tRD Phase1 Adjustment..................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank).................: Auto
    Twr2wr(Different Rank).................: Auto
    Twr2rd(Different Rank).................: Auto
    Trd2wr(Same/Diff Rank).................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….………........1.18750v......: Auto
    CPU Termination…..... 1.200V*.......: Set 1.225-1.25
    CPU PLL…………………....1.500V*...........: Auto
    CPU Referen.…………....0.760V*.........: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: Test 1.20-1.28
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V.........: Auto
    ICH I/O……………….....1.500V...........: 1.5-1.58
    ICH Core…………...……1.100V............: 1.14-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V...........: Auto
    Channel B Reference 0.900V...........: Auto

    Advanced Settings
    Limit CPUID Max. to 3................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)..............: [Enabled]
    C2/C2E State Support.................: [Disabled]
    x C4/C4E State Support...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ..........: [Enabled]
    CPU EIST Function....................: [Enabled]
    Virtualization Technology............: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #36
    Join Date
    Aug 2009
    Posts
    21

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    So far so good....machine rebooted and came up with no BSOD.

    I also was able to start World of Warcraft with no error. Let me run it in this configuration for a bit and see if WOW throws any errors.

    Crossing my fingers...hopefully this is it!!! I really appreciate your assistance so far.

    Frank

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Paged Fault in Non Paged Are BSOD EP45-UD3p

    Nice to see you are making some progress!

    Since I did give you ranges on several things, please do some stability testing and such, and if you still have issues post back the exact settings you choose to use and I will advise back

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •