Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 54

Thread: GA-EP35-DS3 memory multiplier problem




  1. #11
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    Yes now i have 3.6GHz for testing orthos for 1h and it's stable but it's still doing double boot
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP35-DS3 memory multiplier problem

    Could you post your settings for 3.6GHz with a screen capture of EasyTune advanced voltage and MemSet main and spd(predd spd) windows?

  3. #13
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    OK I know my CPU can go 3.6GHz but I want only 3.4GHz and you will ask:
    are you sure ?? So I say yes for 100% I want only 3.4GHz.
    I cannot put the screen of EasyTune, because it crashes on every start, i don't know why... but here is the screen of memset and my 3.4GHz config

    Screenie:

    or link if you don't see the image
    Imageshack - ramlnj

    and full spec in M.i.T
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [10]
    Fine Clock Ratio ____________[0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [340]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Auto]

    Performance Enhance = [Turbo]

    CAS Latency Time________________ Auto
    Dram RAS# to CAS# Delay_________ Auto
    Dram RAS# Precharge Delay_______ Auto
    Precharge Delay (tRAS)__________ Auto

    ACT to ACT Delay (tRRD)_________ Auto
    Rank Write to READ Delay________ Auto
    Write to Precharge Delay_________ Auto
    Refresh to ACT Delay______________ Auto
    Read to Precharge Delay__________ Auto
    Static tRead Value_______________ Auto
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.200V]
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [+0.1]
    (G)MCH OverVoltage Control [+0.1]
    CPU Voltage Control_______ [1.25]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enable]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled]

    And thing I've enable memory performance enhance to Turbo, because it boost all timings in memory. I changed also set all timings to auto. I did not tested it has double boot.
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  4. #14
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP35-DS3 memory multiplier problem

    Quote Originally Posted by tomekggxx View Post
    I changed also set all timings to auto. I did not tested it has double boot.
    I don't understand, does it double boot or you not tested yet? When do you have double boot, just when you cold start or every time you save BIOS changes?

    You can try the latest EasyTune version from
    GIGABYTE - Support&Download - Motherboard - Utility
    Note that there are several versions there, d/l the one that supports your board.

  5. #15
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP35-DS3 memory multiplier problem

    Oh and don't use turbo, for now you can set turbo when you done overclocking.
    With 340FSB you should be able to use 2.40B memory multiplier, it's only a small memory overclock.

  6. #16
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    I have set timings to auto and set performance enhance to turbo and save the changes, then pc turned off and turned on and booted to windows succesfully, but i've not tested from cold start if it has a double boot. I will reply in few minutes if it has.
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  7. #17
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    F*** it has a double boot on cold start.
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  8. #18
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP35-DS3 memory multiplier problem

    What is the default CPU Voltage? maybe it needs more?

  9. #19
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    It has a Vid of 1.15 (1.16250 in BIOS) now I have 1.25V and it's tested and work fully stable. screen of ET6 advanced voltage but there isn't a lot of things in the tab
    Imageshack - 40625309
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  10. #20
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP35-DS3 memory multiplier problem

    Fully stable is only when it boots from cold with no multi boots. I hade multi boots when I wasn't 100% stable even though tests passed with no error.
    Did you have double boots when running stock?
    You watching over the temps I hope.

Page 2 of 6 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •