Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 54

Thread: GA-EP35-DS3 memory multiplier problem




  1. #41
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 memory multiplier problem

    You have EP35 board correct? Looks like it, then you would choose EP35 then.

    I recommend for P35 any Mushkin's models, and Crucial 2.0V rated will work as well.

  2. #42
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    any DDR2 800 types of mushkin and crucial ??
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  3. #43
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    sorry in my country is hard to buy crucial and mushkin memory any idea ?? I Looked for corsair and I found that XMS2 TWIN2X1024 are compatible with my mobo
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  4. #44
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 memory multiplier problem

    Ya I thought it may be hard for you to get Crucial or Mushkin. Those are just my personal favorites/suggestions is all

    Crucial Direct website has U.K and EU Sites you can order from, if either of those are close to you.
    http://www.crucial.com/uk/

    http://www.crucial.com/eu/

    Mushkin also lists places that may be close to you
    http://www.mushkin.com/doc/sales/?mv=EU


    Yes those XMS you mention will work in your board
    Last edited by Lsdmeasap; 08-24-2009 at 03:19 AM.

  5. #45
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    But I'm afraid i will get same double boot on cold start problem :-( Do you have the double boot on cold start with your X58 and Ballistix ??
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  6. #46
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 memory multiplier problem

    No I do not, but X58 and P35 are very different. And no on my P35 and P45 I do not have any issues with Crucial memory, see my signature for a review

  7. #47
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    In all ballistix you have 1:1 FSB:DRAM ratio and you haven't double boot on cold start ?? For make myself sure. Anyway thx for helping and some advice.
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  8. #48
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 memory multiplier problem

    Nope not even at 500 FSB

    If you decide to get Crucial make sure it is the 2.0V rated sticks and not the 2.2V ones

    Are you using the right 2.00 multiplier? Just checking, your board may only offer you one though, but I thought I would ask

  9. #49
    Join Date
    Aug 2009
    Posts
    28

    Default Re: GA-EP35-DS3 memory multiplier problem

    no now i use 3.33 multi for 800 for mem and 240 for FSB. Like I said i cannot lower the multi to 3.20 and lower values because then i've got double boot on cold start. Only for this mem i can use 4.0+,4.0~ and 3.33. To get crucial from net it cost too much for transport. So what mem should i take ?? what brand ?? kingston HyperX, OCZ, Corsair or Patriot ??
    Gigabyte GA-EP35-DS3 rev.2.1 BIOS F2
    Inte Pentium DC E5200 SLAY7 Malaysia
    ASUS GeForce 9600GSO 550/1600
    Kingston KVR800D2N5K2/2G
    Fortron Blue Storm II 400/400W

  10. #50
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 memory multiplier problem

    Maybe those XMS's you mentioned, are they XMS2?

    You need to use the multi based on what your FSB is, here is all of them >>



    Kingson is nice and stable ram, it may not overclock very well but should be perfectly fine and stable at stock speeds on your board

Page 5 of 6 FirstFirst ... 3456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •