Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39

Thread: Gigabyte Ma790FX DQ6 and ram problem




  1. #11
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    I'm Sorry I first gave you settings for a different CPU and Memory
    Please lets start over. Go into Bios and set on Optimized Settings Save and reboot back into bios make your switches turn on RAID
    Integrated Peripherals
    OnChip SATA Controller [Enabled]
    OnChip SATA Type [RAID]
    Save and reboot.
    Now go into Bios again and change
    If you have more than 2 drives and RAID as I do.
    Hard Disk Boot Priority [Press Enter] Set your Boot Disk priority.
    If not go to.
    Advanced BIOS Features
    Make your adjustments to:
    �� Standard CMOS Features
    �� Advanced BIOS Features
    �� Integrated Peripherals
    Now I would like to see your PCHealth
    Please fill out this template and make the changes.
    Please post it.
    Code:
    PC Health Status
    Reset Case Open Status [Disabled]
    Case Opened No
    Vcore 1.376V
    DDR2 1.8V 1.872V
    +3.3V 3.328V
    +12V 12.112V
    Current System Temperature 30oC
    Current CPU Temperature 47oC
    Current CPU FAN Speed 3375 RPM
    Current SYSTEM FAN Speed 0 RPM
    CPU Warning Temperature [Disabled]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled]
    Last edited by artdrivers; 08-29-2009 at 03:05 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  2. #12
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Yes, i have both hard disk on raid 0
    Here following my parameters as you requested..

    PC Health Status
    Reset Case Open Status [Disabled]
    Case Opened ----YES
    Vcore 1.264V
    DDR2 1.8V 1.920V
    +3.3V 3.280V
    +12V 12.112V
    Current System Temperature 42oC
    Current CPU Temperature 40oC
    Current CPU FAN Speed 3370 RPM
    Current SYSTEM FAN Speed 0 RPM
    CPU Warning Temperature [60C\140F]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled]
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  3. #13
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Ok, i'm going to sleep and i'm leaving the pc running memtest in Optimized Settings as you said me. Just to see if give already some error.
    Waiting for other order sir
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  4. #14
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    I am glad we started over and I asked. What type of system cooling do you use? Do you have a system fan? Exhaust Fan This is a case fan and usually is hooked up to the motherboard? If not you should supply one. If you do have one and it is hooked up to a 4pin molex then you may want to do this.
    CPU Smart FAN Control [enabled] If you don't have a case fan. [disabled] install case fan.
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control = [disabled] If you have a case fan and it is on 4 pin molex
    If you don't have a system fan we should wait until you get one before we change your memory clock to 5.33
    Please let me know how that goes.
    Last edited by artdrivers; 08-29-2009 at 10:06 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #15
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Hello, i have in case 2 big fan, one of 12cm in the front and one big of 25 on the side.
    The big fun is connected directly on the power supply
    according to the temperature on the case, is well cooled, consider that where i live in theese day there are 32C.
    Anyway if you want i can install an additional fun on the case or i may try to modify the big fun and connect it on the motherboard.
    Waiting for your info.
    Ps i runnem memtest 2.11 for all night and no error since now.
    Have a good day.
    Pietro
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  6. #16
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    It's good
    From what you said you do not have exhaust fan. The concern is where does heat go without exhaust fan? Through system and out power supply. You have 2 PCIE cards which will raise temperature. A good exhaust fan will benefit your system. Now set memory to.
    Go to bios and first press Ctrl + F1
    Make adjustment and test. Check temps
    Code:
    MB Intelligent Tweaker(M.I.T.)
    CPU Clock Ratio [Auto]
    CPU Host Clock Control [Auto]
    x CPU Frequency (MHz) 200
    HT Link Frequency [Auto]
    PCIE Clock (MHz) [Auto]
    Set Memory Clock [Auto]
    x Memory Clock DDR 533
    �� DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Manual]
    CPU Voltage Control [Normal]
    Normal CPU Vcore 1.3500V
    DDR2 Voltage Control [Normal] manual +0.3
    Chipset Voltage Control [Normal]
    PCIE Voltage Control [Normal]
    HTT Voltage Control [Normal] 
    HTR Voltage Control [Normal] 
    DCTs Mode Ungaged
    Cpu Host Clock Control (auto)
    x CPU Frequency 200
    Set memory clock Manual
    Memory Clock x5.33 1066
    Code:
    DDRII TIMING ITEM Manual 
    CAS# latency 5T 
    Ras to CAS R\W Delay 5T 
    Row Precharge Time 6T 
    Minimun RAS Active time 18T 
    1T\2T Command Timing 2T -- --
    TwTr Command delay 4T  
    Trfc0 for DIMM1 195ns
    Trfc2 for DIMM2 195ns
    Trfc1 for DIMM1 75ns -- --
    Trfc3 for DIMM1 75ns -- --
    Write Recovery time 6T 
    Precharge time 3T 
    Row Cycle Tome 24T 
    Ras To Ras Delay 4T 
    DQS Training Control Skip DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    Please let us know how that goes.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  7. #17
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    MB Intelligent Tweaker(M.I.T.)
    CPU Clock Ratio [Auto]
    CPU Host Clock Control [Auto]
    x CPU Frequency (MHz) 200
    HT Link Frequency [Auto]
    PCIE Clock (MHz) [Auto]
    Set Memory Clock [Auto] Manual otherwise will be x 4 not x533. i set it manual and 533
    x Memory Clock DDR 533 Manual otherwise will be x 4 not x533. i Set manual and 533
    �� DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Manual]
    CPU Voltage Control [Normal]
    Normal CPU Vcore 1.3500V Normal is 1.2500 (cpu Phenom 9600 2.3 Ghz). i left 1.2500 should I increase??
    DDR2 Voltage Control [Normal] manual +0.3
    Chipset Voltage Control [Normal]
    PCIE Voltage Control [Normal]
    HTT Voltage Control [Normal]
    HTR Voltage Control [Normal]
    DCTs Mode Ungaged
    Cpu Host Clock Control (auto)
    x CPU Frequency 200
    Set memory clock Manual
    Memory Clock x5.33 1066



    Did as You asked me, now testing during all night and i will let you know tomorrow.
    Tomorrow i will buy also 2 exhaust fan 80x80 to put it on the back of tha case.

    Thanks againg, anyway in the first 5 minutes the memtest86+ 2.11 looks working good.
    Pietro
    Last edited by diodellamorte; 09-01-2009 at 08:04 AM.
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  8. #18
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    A questions, i'm runniong memtest86+ 2.11 and i saw that even if i set on the bios 533 1066 5-5-6-18, in the memtest he says :
    setting: RAM : 533Mhz (DDR1067) \ CAS : 5-3-3-6-24 \ DDR-2 (dual)


    Is that normal?
    Thanks
    Pietro
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  9. #19
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Set CPU voltage Phenom 9600 to 1.28v please. This is better.
    Yes the numbers are off in Memtest86+-2.11 But the test will be good. Do not worry about the readings or numbers in Memtest86+ 2.11. Just test for errors. Did you set the DDR voltage to +.03? Please check voltage and post us PC health status again. Thanks.
    Code:
    PC Health Status
    Reset Case Open Status [Disabled]
    Case Opened ----YES
    Vcore 1.264V 1.28v
    DDR2 2.1v~2.2V 
    +3.3V 3.280V
    +12V 12.112V
    Current System Temperature 42oC
    Current CPU Temperature 40oC
    Current CPU FAN Speed 3370 RPM
    Current SYSTEM FAN Speed 0 RPM
    CPU Warning Temperature [60C\140F]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled
    ]

    This is for my Phenom 9600 With 4GB of memory@1066Mhz.
    Your memory needs DDR voltage a little higher for manufacturers voltage recommendation.

    By artdrivers at 2009-06-24
    Last edited by artdrivers; 09-01-2009 at 08:26 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  10. #20
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Test of hte ram compleated and no errors. I confirm you that the Ram was raised at +0.3 and actual are 2.15v.
    Now i rised the CPU of +0.025 and i post you my status.

    PC Health Status
    Reset Case Open Status [Disabled]
    Case Opened ----YES
    Vcore 1.296
    DDR2 2.176
    +3.3V 3.264V
    +12V 12.112V
    Current System Temperature 42oC
    Current CPU Temperature 41oC
    Current CPU FAN Speed 3875 RPM
    Current SYSTEM FAN Speed 0 RPM
    CPU Warning Temperature [60C\140F]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled


    Thanks.
    Pietro
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •