Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 39 of 39

Thread: Gigabyte Ma790FX DQ6 and ram problem




  1. #31
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Cpuid
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  2. #32
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Running CPu core damage


    I'm going to sleep, tomorrow i leave for 3 days due to job.

    Tanks again for helping me.

    How much time should i run the core damage? looks working good for 10 minutes and the core temperature raised up to 51c after 30 seconds that i close the program the core temperature decreased to 39C consider that here in Sicily there are 28C now.

    If the ram is tested and work good, the CPU also, could be something like chipset or northbridge or somthing on the motherboard?
    Last edited by diodellamorte; 09-02-2009 at 10:09 AM.
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  3. #33
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    OK, i have some problem, the system is stable and don't crash anmore once starded, but during start i have to try many time before load the OS. And yesterday did the same during OS reinstall. What could be?
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  4. #34
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    What OS are you installing now? Please be specific on OS.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #35
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Windows 7 64 bit, i still using windows 7 64bit i was trying to reinstall windows 7 64 bit to "clean" the system because after many crash i think is better to reinstall, anyway i had crash during installation.

    The system, is very stable after sturtup, the problem is during sturtup.
    I can try to install Windows Vista if you want.
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  6. #36
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    You may want to loosen memory timings all the way and leave it at 1066Mhz. Just change timings. Try a format with a clean install.

    Code:
    DDRII TIMING ITEM Manual 
    CAS# latency 5T 
    Ras to CAS R\W Delay 7T 
    Row Precharge Time 7T 
    Minimun RAS Active time 24T
    1T\2T Command Timing 2T -- --
    TwTr Command delay 4T  
    Trfc0 for DIMM1 195ns
    Trfc2 for DIMM2 195ns
    Trfc1 for DIMM1 75ns -- --
    Trfc3 for DIMM1 75ns -- --
    Write Recovery time 8TPrecharge time 3T 
    Row Cycle Tome 31T 
    Ras To Ras Delay 4T 
    DQS Training Control Skip DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  7. #37
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    ok i will try this, but if i pass memtest86+ should i assume that the memory are ok and can handle the timing?

  8. #38
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    so why you said to lower the timings if i passed many times the memtest?
    In this case shoul i search stability in some other parts of the Computer?

  9. #39
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Yes
    If passing it is more than likely something else.
    Like GPU, Power supply, Drives, RAID drive controller, RAID & chipset software,
    The Memory controller timing control may need DQS training. Here is more on this.--->
    Tech ARP - DQS Training Control
    Due to random reboots you may want to try
    DQS Training Control Perform DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    Last edited by artdrivers; 09-03-2009 at 06:56 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •