Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39

Thread: Gigabyte Ma790FX DQ6 and ram problem




  1. #1
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Question Gigabyte Ma790FX DQ6 and ram problem

    Hello, i have Gigabyte Ma 790fx-DQ6 with a ram Teamgroup pc8500 1066 5-5-5-15
    The problem is that i have a lot of instability. If i rise the ram at 1066 even i i leave all other parameters on Auto (5-7-7-15) the sistem crash very often
    What i should try?
    Please help me.
    Thanks
    here is my hardware:
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  2. #2
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    When you say it crashes can you be more specific? Does it go to sleep or pass out? You should get a power supply and hard drives with an OS What are the temperatures.
    Last edited by artdrivers; 08-26-2009 at 05:53 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  3. #3
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Power supply is good, is an enermax noisetaker 600w, temperature are under control, below 40 -45 C for CPU Chiset and case.
    What you mean i need an hard driver with an OS i have to HD in Raid 0? my computer is complete and run, just dosen't me allow to set proper ram config?
    for crash i mean blue screen and crash dumping message on windows 7.
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  4. #4
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Ok lets set your ram. We will use this:
    http://china.giga-byte.com/FileList/...90fx-dq6-e.pdf
    Try this OK? Go into your Bios del at boot and then press Ctrl first hold it down and and then F1 Kinda like at the same time. This should display more options watch closly it should flicker. Now Navigate to your MB intelligent Tweaker Change system voltage control to manual.
    Now go to DDR2 Voltage Control set it to 2.0v to start. You may need to raise it later. Don't for now. We will test this before raising any more
    Code:
    MB Intelligent Tweaker(M.I.T.)
    CPU Clock Ratio [Auto]
    CPU Host Clock Control [Auto]
    x CPU Frequency (MHz) 200
    HT Link Frequency [Auto]
    PCIE Clock (MHz) [Auto]
    Set Memory Clock [Auto]
    x Memory Clock DDR 533
    �� DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Normal]
    CPU Voltage Control [Normal]
    Normal CPU Vcore 1.3500V
    DDR2 Voltage Control [Normal] manual +0.2
    Chipset Voltage Control [Normal]
    PCIE Voltage Control [Normal]
    HTT Voltage Control [Normal] =1.2
    HTR Voltage Control [Normal] =1.3 MCH or northbridge
    
    DRAM Configuration
    ��������: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
    F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
    DDRII Timing Items [Auto]
    CAS# latency 4T 5T
    x 1T/2T Command Timing 1T 2T
    x TwTr Command Delay 2T 3T
    x Write Recovery Time 4T 5T
    x Precharge Time 2T 3T
    x Row Cycle Time 15T  21T
    x RAS to CAS R/W Delay 6T
    x RAS to RAS Delay 2T 4T
    x Row Precharge Time 4T 6T
    x Minimum RAS Active Time 11T 15T
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #5
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Ok, on the Bios, i assume that normal means Auto, since don't have voice "normal".
    Then i set as You said but : x TwTr Command Delay 2T 3T the minimun is 4.
    In order to simplify yout Job, i give you all my option (and what i have set) because may be on the manual you have setting for the firts bios, i have F7 bios (the latest).
    DCTs Mode Ungaged
    Cpu Host Clock Control (auto)
    x CPU Frequency 200
    Set memory clock Manual
    Memory Clock x5.33 1066
    DDRII TIMING ITEM Manual SPD Auto
    CAS# latency 5T 5 5
    Ras to CAS R\W Delay 6T 5 7
    Row Precharge Time 6T 5 7
    Minimun RAS Active time 15T 15 20
    1T\2T Command Timing 2T -- --
    TwTr Command delay 4T 3 4 (4 is the minimum for manua setting)
    Trfc0 for DIMM1 127,5ns 127,5ns 127,5ns
    Trfc2 for DIMM2 127,5ns 127,5ns 127,5ns
    Trfc1 for DIMM1 75ns -- --
    Trfc3 for DIMM1 75ns -- --
    Write Recovery time 5T 6 8
    Precharge time 3T 3 3
    Row Cycle Tome 21T 24 31T
    Ras To Ras Delay 4T 3 4
    DQS Training Control Skip DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

  6. #6
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Anyway even with your setting, i have problem of crash after system start.
    HTT Voltage Control [Normal] =1.2 (normal is 1.3 i left 1.3)
    HTR Voltage Control [Normal] =1.3 MCH or northbridge (normal 1.2 i tryed 1.2 and 1.3)

  7. #7
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    HTT Voltage Control [Normal] =1.3
    HTR Voltage Control [Normal] =1.4 MCH or northbridge
    Code:
    DCTs Mode Ungaged
    Cpu Host Clock Control (auto)
    x CPU Frequency 200
    Set memory clock Manual
    Memory Clock x5.33 1066
    DDRII TIMING ITEM Manual SPD Auto
    CAS# latency 5T 5 5
    Ras to CAS R\W Delay 5T 
    Row Precharge Time 6T 
    Minimun RAS Active time 18T 
    1T\2T Command Timing 2T -- --
    TwTr Command delay 4T  (4 is the minimum for manua setting)
    Trfc0 for DIMM1 195ns
    Trfc2 for DIMM2 195ns
    Trfc1 for DIMM1 75ns -- --
    Trfc3 for DIMM1 75ns -- --
    Write Recovery time 6T 
    Precharge time 3T 
    Row Cycle Tome 24T 
    Ras To Ras Delay 4T 
    DQS Training Control Skip DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  8. #8
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Quote Originally Posted by artdrivers View Post
    HTT Voltage Control [Normal] =1.3
    HTR Voltage Control [Normal] =1.4 MCH or northbridge
    Code:
    DCTs Mode Ungaged
    Cpu Host Clock Control (auto)
    x CPU Frequency 200
    Set memory clock Manual
    Memory Clock x5.33 1066
    DDRII TIMING ITEM Manual SPD Auto
    CAS# latency 5T 5 5
    Ras to CAS R\W Delay 5T 
    Row Precharge Time 6T 
    Minimun RAS Active time 18T 
    1T\2T Command Timing 2T -- --
    TwTr Command delay 4T  (4 is the minimum for manua setting)
    Trfc0 for DIMM1 195ns
    Trfc2 for DIMM2 195ns
    Trfc1 for DIMM1 75ns -- --
    Trfc3 for DIMM1 75ns -- --
    Write Recovery time 6T 
    Precharge time 3T 
    Row Cycle Tome 24T 
    Ras To Ras Delay 4T 
    DQS Training Control Skip DQS
    CKE power down mode Disable
    CKE power down control Per channel
    Memclock tri-stating Disable
    Bank Swizzle Mode Enable
    Sorry, i had a little blue screen before but now i making test on the ram and lokks working with the parameters you told me before,
    Shou i try also these new setting you posted me or we can keep working starting whit the previous?
    Thanks Pietro
    Really thanks for helping me.
    I have a little questions, with wich program you want i test the ram? i'm using memtest.

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    Please use this memtest86+ 2.11
    Memtest86+ - Advanced Memory Diagnostic Tool

    Sorry, you will have to wait for help on the rest with Artdrivers as I can't offer much AMD Advice myself.

  10. #10
    Join Date
    Aug 2009
    Location
    Italy
    Posts
    24

    Default Re: Gigabyte Ma790FX DQ6 and ram problem

    No problem, i will wait.
    You guys are very helpfull. thanks for your help.
    Pietro
    Gigabyte 790FXDQ6 - Phenom 9600 - 2x ati 3870-
    2x2giga ram Teamgroup xtremdark pc8500 1066 5-5-5-15 2.2-2.3v

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •