Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 17 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 161

Thread: UD3P and Q9550 Overclock Problems




  1. #41
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: UD3P and Q9550 Overclock Problems

    Raising Cpu Termination (aka VTT) can help with stability issues.
    The general recommendation is that VTT should be at least 0.05 - 0.10 volts lower than Cpu Vcore.

    It's best if you provide information that tells us which test you were running (small FFT, Blend, large FFT)
    and what the FFT size was when the error (rounding?, expecting ....?) occurred and to post your failed bios template.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  2. #42
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: UD3P and Q9550 Overclock Problems

    I would comply but it was a hard crash. Nothing - just a reboot.

  3. #43
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: UD3P and Q9550 Overclock Problems

    These are the settings I use for 3.83GHz your welcome to try them out. I don't know about your memory timings so set them as per the side of the stick.

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio.............................: 8 x
    Fine CPU Clock Ratio.....................:.+0.5
    CPU Frequency ...........................: 3.83GHz
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (Mhz) ............: 451 Mhz
    PCI Express Frequency (Mhz) .........:Auto ---100
     
    C.I.A.2 ................................:Disabled
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [2.40B]
    Memory Frequency (Mhz) ..............: 1083
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................5 --- Set the next 4 to whats on the side of your memory
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
     
    Advanced Timing Control
    tRRD...........................................4 --- Can try the next 6 settings
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ....................:Auto --- 2
     
    Driving Strength Profiles Driving Strength ....:Auto ---OC1200
     
    Channel A
    Static tRead Value.........................:Auto ---8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
     
    Channel B
    Static tRead Value.........................:Auto ---8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
     
    Motherboard Voltage Control
    CPU
    CPU Vcore….……….........................:Auto --- 1.25625
    CPU Termination…..... 1.200V ...........:Auto --- 1.200
    CPU PLL……………….1.500V*.......: Auto ---1.500
    CPU Reference.…………....0.760V*.......:Auto --- .760
     
    MCH/ICH
    MCH Core…………….....1.100V............: Auto --- 1.220
    MCH Reference….…….0.760V............: Auto --- .760
    MCH/DRAM Ref.…......0.760V..........: Auto --- .990 - 1.04
    ICH I/O……………….....1.500V............: Auto --- 1.500
    ICH Core…………...……1.100V.............: Auto --- 1.100
     
    DRAM
    DRAM Voltage ……....1.800V............: 2.08 --- Set ot what's listed on side of ram
    DRAM Termination .…0.900V............: Auto --- .990 - 1.04
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
    G/L

  4. #44
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: UD3P and Q9550 Overclock Problems

    Conners,
    Are you trying to infect Ken429 with the overclocking bug you caught when you went from 3.6 to 3.8GHz?
    And then you couldn't stop until you got your system stable at 4.25GHz (8.5 x 500MHz).
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #45
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: UD3P and Q9550 Overclock Problems

    No, well yes might as well infect them all... I am just tweaking the ol ZM-MFC2 then off to higher ground.

  6. #46
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: UD3P and Q9550 Overclock Problems

    The system has been running Prime95 for almost 14 hours so I think I can conclude I got a stable setup. Attached is the templete of the current settings. You asked for a screen display of ET6, Memset, CPU-Z and I threw in Prime 95 and CoreTemp. I got it on the screen now and have done a screen caputure and put it in an Excel workbook. How do I get it to display/attach so it will display on this forum?!
    Code:
    Motherboard: Model: GA-EP45-UD3P(rev 1.6) Bios Version:  FB
    Cpu: Q9550 E0
    Ram: 2X2GB Brand:  Mushkin 996559 XP2-8500 DDR2 - Mushkin Enhanced
    Power Supply Unit: Corsair 620HX
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ---------------- : [Auto] 
    CPU Clock Ratio ------------------------ : [ 8 X]
    Fine CPU Clock Ratio ------------------- : [+0.5] 
    CPU Frequency -----------------------: 3.80GHz( 450X8)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control ----------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------- : [ 450]
    PCI Express Frequency (Mhz) ------------ : [ 100]
    C.I.A.2 -------------------------------- : [Disabled]
    Advanced Clock Control     [Press Enter]
    CPU Clock Drive ------------------------ : [ 800mV]
    PCI Express Clock Drive ---------------- : [ 900Mv]
    CPU Clock Skew (ps) -------------------- : [   0ps]
    MCH Clock Skew (ps) -------------------- : [   0ps]
    DRAM Performance Control
    Performance Enhance -------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) ---- : [Disabled]
    (G)MCH Frequency Latch ----------------- : [Auto]
    System Memory Multiplier --------------- : [2.40B]
    Memory Frequency (Mhz) -----------------: 1066 1080
    DRAM Timing Selectable -(SPD)----------- : [Manual]
    Standard Timing Control
    CAS Latency Time -------- 5 ------------ : [5]
    tRCD -------------------- 7 ------------ : [   5]
    tRP --------------------- 7 ------------ : [   5]
    tRAS ------------------- 24 ------------ : [  15]
    Advanced Timing Control    [Press Enter]
    tRRD -------------------- 4 ------------ : [Auto]
    tWTR -------------------- 4 ------------ : [Auto]
    tWR --------------------- 8 -------------: [Auto]
    tRFC --------------------68 ------------ : [Auto]
    tRTP -------------------- 4 ------------ : [Auto]
    Command Rate (CMD) ------ 0 -------------: [Auto]
    Channel A
    Channel A Timing Settings  [Press Enter]
    Static tRead Value ------ 8 ------------ : [Auto]
    tRD Phase0 Adjustment --- 0 ------------ : [Auto]
    tRD Phase1 Adjustment --- 0 ------------ : [Auto]
    tRD Phase2 Adjustment --- 0 ------------ : [Auto]
    tRD Phase3 Adjustment --- 0 ------------ : [Auto]
    Trd2rd(Different Rank) -- 8 ------------ : [Auto]
    Twr2wr(Different Rank) -- 8 ------------ : [Auto]
    Twr2rd(Different Rank) -- 7 ------------ : [Auto]
    Trd2wr(Same/Diff Rank) -- 9 ------------ : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]
    Dimm2 Clock Skew Control --------------- : [Auto]
    DDR Write Training --------------------- : [Auto]
    Channel B
    Channel B Timing Settings  [Press Enter]
    Static tRead Value ------ 8 ------------ : [Auto]
    tRD Phase0 Adjustment --- 0 ------------ : [Auto]
    tRD Phase1 Adjustment --- 0 ------------ : [Auto]
    tRD Phase2 Adjustment --- 0 ------------ : [Auto]
    tRD Phase3 Adjustment --- 0 ------------ : [Auto]
    Trd2rd(Different Rank) -- 8 ------------ : [Auto]
    Twr2wr(Different Rank) -- 8 ------------ : [Auto]
    Twr2rd(Different Rank) -- 7 ------------ : [Auto]
    Trd2wr(Same/Diff Rank) -- 9 ------------ : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]
    Dimm2 Clock Skew Control --------------- : [Auto]
    DDR Write Training --------------------- : [Auto]
    Channel A Driving Settings [Press Enter]
    Driving Strength Profile --------------- : [Auto]
    Data Driving Pull-Up Level ------------- : [Auto]
    Cmd  Driving Pull-Up Level ------------- : [Auto]
    Ctrl Driving Pull-Up Level ------------- : [Auto]
    Clk  Driving Pull-Up Level ------------- : [Auto]
    Data Driving Pull-Down Level ----------- : [Auto]
    Cmd  Driving Pull-Down Level ----------- : [Auto]
    Ctrl Driving Pull-Down Level ----------- : [Auto]
    Clk  Driving Pull-Down Level ----------- : [Auto]
    Channel B Driving Settings [Press Enter]
    Driving Strength Profile --------------- : [Auto]
    Data Driving Pull-Up Level ------------- : [Auto]
    Cmd  Driving Pull-Up Level ------------- : [Auto]
    Ctrl Driving Pull-Up Level ------------- : [Auto]
    Clk  Driving Pull-Up Level ------------- : [Auto]
    Data Driving Pull-Down Level ----------- : [Auto]
    Cmd  Driving Pull-Down Level ----------- : [Auto]
    Ctrl Driving Pull-Down Level ----------- : [Auto]
    Clk  Driving Pull-Down Level ----------- : [Auto]
    Motherboard Voltage Control
    CPU
    Voltage Types ----------- Normal ---------- Current
    Load-Line Calibration ------------------ : [Disabled]
    CPU Vcore --------------- 1.28750V ----- : [1.31250V] 
    CPU Termination --------- 1.200V* ------ : [1.220V] 
    CPU PLL ----------------- 1.500V* ------ : [Normal] 
    CPU Reference ----------- 0.760V* ------ : [Normal] 
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.280V] 
    MCH Reference ----------- 0.760V ------- : [Normal]
    MCH/DRAM Ref ------------ 0.900V ------- : [Normal]
    ICH I/O ----------------- 1.500V ------- : [1.570V] 
    ICH Core ---------------- 1.100V ------- : [Normal] 
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [2.020V] 
    DRAM Termination -------- 0.900V ------- : [Normal]
    Channel A Reference ----- 0.900V ------- : [Normal]
    Channel B Reference ----- 0.900V ------- : [Normal]
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function ---------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled] 
    Integrated Peripherals
    USB Storage Detect --------------------- : [Disabled]
    Ran Prime95 for X hours with no errors (9/2/2009)
    __________________

  7. #47
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: UD3P and Q9550 Overclock Problems

    When your writing you post (if you in advanced mode and not quick reply) scroll down to Additional Options and click on manage attachments. Be aware it will only allow you to post one attachment to a post.

  8. #48
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: UD3P and Q9550 Overclock Problems

    Good morning. This Image is an hour old - system is still running Prime95!

  9. #49
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: UD3P and Q9550 Overclock Problems

    Make screen captures with Paint or any other image editor, crop and erase unneeded parts it as described in this post.
    IrfanView actually has a crop option if I remmeber correctly, with Paint just select the desired area copy and paste in a new window.
    Save Image in PNG format and attach it if it's small enough, otherwise you can use free image sharing service, I myself use tinypic.com.

  10. #50
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: UD3P and Q9550 Overclock Problems

    Try this one.

Page 5 of 17 FirstFirst ... 3456715 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •