Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: GA-EX58-UD4P + Win 7RC = BSOD




  1. #21
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    What's your full settings that are failing? This may not have anything to do with your PSU at all, Prime will always fail until you tweak things just right and none of your temps or anything you have mentioned make me think your PSU is to blame.

    PC Wizard Power/Aux temps are not your PSU Temps at all, it is your North Bridge (MCH) temps.

    I suggest you use Everest Ultimate to monitor temps, it will show everything properly such as temps, voltages, and fan speed all at once as you can see here >>



    The Motherboard sensor in your BIOS, also shown as motherboard in many other tools such as Everest, Easytune, ect will show you the proper PCB Temps of the board itself. I am sure yours are fine, you just need to do some tweaking still is all

  2. #22
    Join Date
    Aug 2009
    Posts
    14

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Thanks Lsdmeasap,

    I really appreciate your comments. I will get everest down loaded.

    The settings that I am trying to use that failed at around 2-1/2hrs are attached as a .doc file. (I don't know how to put them in here the cool way that you do...)
    GIGABYTE GA-EX58-UD4P (F10d)
    CORE I7 920 2.66G AD0
    CORSAIR XMS3 12GB DDR3 1600
    NOCTUA NH-U12P SE1366
    WD WD6401AALS HD x 3
    Sony Optiarc DVD/CD
    GIGABYTE GV-R455D3-512I HD4550
    ANTEC SONATA III 500 BK RT

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Please see my signature for a template, then fill it out and paste here

    If I have not already suggested, please update your BIOS to F9c or F10d, I saw your F8 noted in your signature and recently have been made aware of some issues with that verison

  4. #24
    Join Date
    Aug 2009
    Posts
    14

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    CPU = Core i7 920 [<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:place w:st="on"><st1:City w:st="on">Bloomfield</st1:City></st1:place>], Model A, Rev. D0
    Motherboard = GA-EX58-UD4P, Rev. #1
    BIOS Version = F10a
    Ram = CORSAIR, XMS3, HX3X12G1600C9 G http://www.corsair.com/_datasheets/HX3X12G1600C9.pdf<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p></o:p>
    Advanced CPU Features:<o:p></o:p>
    CPU Clock Ratio ................................ [20x]<o:p></o:p>
    Intel(R) Turbo Boost Tech .................. [Enabled]<o:p></o:p>
    CPU Cores Enabled ............................ [All]<o:p></o:p>
    CPU Multi Threading .......................... [Enabled]<o:p></o:p>
    CPU Enhanced Halt (C1E) ................... [Disabled]<o:p></o:p>
    C3/C6/C7 State Support .................... [Disabled]<o:p></o:p>
    CPU Thermal Monitor ......................... [Enabled]<o:p></o:p>
    CPU EIST Function ............................ [Disabled]<o:p></o:p>
    Virtualization Technology ................... [Disabled] <o:p></o:p>
    Bi-Directional PROCHOT ..................... [Enabled]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Uncore & QPI Features:<o:p></o:p>
    QPI Link Speed .............................. [x36]<o:p></o:p>
    Uncore Frequency .......................... [x22]<o:p></o:p>
    Isonchronous Frequency ..................[Enabled]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Standard Clock Control:<o:p></o:p>
    Base Clock (BCLK) Control ................ [Enabled]<o:p></o:p>
    BCLK Frequency (MHz) ..................... [160]<o:p></o:p>
    PCI Express Frequency (MHz) ........... [100]<o:p></o:p>
    <o:p></o:p>
    C.I.A.2 [Disabled]<o:p></o:p>
    <o:p></o:p>
    Advanced Clock Control:<o:p></o:p>
    CPU Clock Drive ..............................[800mV]<o:p></o:p>
    <st1:Street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:Street> ................... [900mV]<o:p></o:p>
    CPU Clock Skew ............................. [0ps]<o:p></o:p>
    IOH Clock Skew ............................. [0ps]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced DRAM Features:<o:p></o:p>
    Performance Enhance ...................... [Standard]<o:p></o:p>
    Extreme Memory Profile (X.M.P) ......... [Disabled]<o:p></o:p>
    System Memory Multiplier (SPD) ........ [x10]<o:p></o:p>
    DRAM Timing Selectable (SPD) .......... [Expert]<o:p></o:p>
    <o:p></o:p>
    Channel A + B + C<o:p></o:p>
    <o:p></o:p>
    Channel A Timing Settings:<o:p></o:p>
    ##Channel A Standard Timing Control##<o:p></o:p>
    CAS Latency Time ...................... [9]<o:p></o:p>
    tRCD ....................................... [9]<o:p></o:p>
    tRP ......................................... [9]<o:p></o:p>
    tRAS ....................................... [24]<o:p></o:p>
    <o:p></o:p>
    Below values left in Auto except Command Rate set to 1 <o:p></o:p>
    <o:p></o:p>
    ##Channel A Advanced Timing Control##<o:p></o:p>
    tRC ........................................ (Should be = tRAS + tRP or above for stability)<o:p></o:p>
    tRRD .......................................<o:p></o:p>
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)<o:p></o:p>
    tWR ........................................<o:p></o:p>
    tWTP ....................................... (tWTP Must = tWR + tWL + 4)<o:p></o:p>
    tWL ........................................ (tWL Must be CAS Latency -1)<o:p></o:p>
    tRFC .......................................<o:p></o:p>
    tRTP .......................................<o:p></o:p>
    tFAW ......................................<o:p></o:p>
    Command Rate (CMD) ................ [1]<o:p></o:p>
    <o:p></o:p>
    ##Channel A Misc Timing Control##<o:p></o:p>
    Round Trip Latency ................... <o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced Voltage Control:<o:p></o:p>
    <o:p></o:p>
    CPU<o:p></o:p>
    Load Line Calibration ................. [Disabled]<o:p></o:p>
    CPU Vcore ............................... [1.25]<o:p></o:p>
    QPI/VTT Voltage 1.150v .................. [1.295]<o:p></o:p>
    CPU PLL 1.800v ....................... [AUTO]<o:p></o:p>
    <o:p></o:p>
    MCH/ICH<o:p></o:p>
    PCIE 1.500v ........................... [1.5]<o:p></o:p>
    QPI PLL 1.100v ....................... [1.14]<o:p></o:p>
    IOH Core 1.100v ..................... [1.16]<o:p></o:p>
    ICH I/O 1.500v ....................... [1.5]<o:p></o:p>
    ICH Core 1.1v ........................ [1.14]<o:p></o:p>
    <o:p></o:p>
    DRAM<o:p></o:p>
    DRAM Voltage 1.500v .............. [1.60]<o:p></o:p>
    DRAM Termination 0.750v [AUTO]<o:p></o:p>
    Ch-A Data VRef. 0.750v [AUTO]<o:p></o:p>
    Ch-B Data VRef. 0.750v [AUTO]<o:p></o:p>
    Ch-C Data VRef. 0.750v [AUTO]<o:p></o:p>
    Ch-A Address VRef. 0.750v [AUTO]<o:p></o:p>
    Ch-B Address VRef. 0.750v [AUTO]<o:p></o:p>
    Ch-C Address VRef. 0.750v [AUTO]<o:p></o:p>


    Thanks,
    Rick

    p.s. updating sig now
    Last edited by rtucker55; 09-11-2009 at 01:31 AM.
    GIGABYTE GA-EX58-UD4P (F10d)
    CORE I7 920 2.66G AD0
    CORSAIR XMS3 12GB DDR3 1600
    NOCTUA NH-U12P SE1366
    WD WD6401AALS HD x 3
    Sony Optiarc DVD/CD
    GIGABYTE GV-R455D3-512I HD4550
    ANTEC SONATA III 500 BK RT

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Thanks!

    I would give these changes a try, tweaking a system can take a bit if you are not experienced at it, even if you are sometimes too! This can be especially true with 12GB

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] << you can use x44 here if you like, just has to be under 8GT/s
    Uncore Frequency .......................... [x22] << May be ok, but maybe not. Did you have issues at 20-21 as well? This will require more voltages to be stable, as you will see me suggest below
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [160]
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x10]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... [9]
    tRCD ....................................... [9]
    tRP ......................................... [9]
    tRAS ....................................... [24]

    Below values left in Auto except Command Rate set to 1

    So are you using F8 BIOS or F10a as noted in your sig? I ask due to your note about tWTP, tWL

    ##Channel A Advanced Timing Control##
    tRC ........................................ (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................
    tWTP ....................................... N/A in F8 (tWTP Must = tWR + tWL + 4)
    tWL ........................................ N/A in F8 (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................ [1]

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... [1.25]
    QPI/VTT Voltage 1.150v .................. [1.295] << May need more for 12GB and x22 Uncore, try 1.32-1.42
    CPU PLL 1.800v ....................... [AUTO]

    MCH/ICH
    PCIE 1.500v ........................... [1.5]
    QPI PLL 1.100v ....................... [1.14]
    IOH Core 1.100v ..................... [1.16] << Set 1.20-1.24
    ICH I/O 1.500v ....................... [1.5]
    ICH Core 1.1v ........................ [1.14]

    DRAM
    DRAM Voltage 1.500v .............. [1.60] << Set 1.64-1.68
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  6. #26
    Join Date
    Aug 2009
    Posts
    14

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Sorry for the F8 notes in the settings, I'm not paying much attention to detail. I am in fact using BIOS F10a.

    Will give these settings a try this afternoon.

    Thanks so much for your continued help.

    regards,
    Rick
    GIGABYTE GA-EX58-UD4P (F10d)
    CORE I7 920 2.66G AD0
    CORSAIR XMS3 12GB DDR3 1600
    NOCTUA NH-U12P SE1366
    WD WD6401AALS HD x 3
    Sony Optiarc DVD/CD
    GIGABYTE GV-R455D3-512I HD4550
    ANTEC SONATA III 500 BK RT

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    K, I just wondered since I noticed the difference. No biggie, look at my signature! I am using F9c and it is still on F7d

    Good luck and keep us posted! If you fail to get things going please post back the exact settings you try that fail

  8. #28
    Join Date
    Sep 2009
    Location
    UK
    Posts
    56

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Quote Originally Posted by rtucker55 View Post
    Thanks for the reply Ickk,
    The 50c, is that what Antec specifies as the Max. environmental operating temperature?
    Yes ... to put your mind at rest your PSU i belive is actually made by Seasonic, who make top rated psu's for a lot of brand name companys
    including the one i use.

    By discounting a heat problem it helps to narrow the fault down , but as LSD said your temps you pasted later are all fine. and nothing to worry about.

    Regards Ickk
    Gigabyte EX58-UD4P rev 1.0
    Intel I7 920 C0/C1 step batch 3838B034
    Cooling: Noctua NH-U12P SE1336
    Corsair TX650 psu
    Nvidia GTX 280
    Mem G.Skill or OCZ
    2x WD Caviar Black 500gb Raid 0
    Case Thermaltake Armor VA8000BWS
    Vista 64

  9. #29
    Join Date
    Aug 2009
    Posts
    14

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    Thanks Ickk for the reply on the PSU.

    I have been testing with little luck and do have a question about procedure:

    If during stability testing the machine fails (i.e. lockup, BSOD, reboot) is it best practice to clear cmos, load optimized defaults and save, then re-enter all bios settings and save prior to next test.

    The reason I ask is that if I Don't do this, no matter which setting I change, I always get the same type failure at about the same time window.

    I think my lack of understanding is delaying my progress...

    Regards,
    Rick
    GIGABYTE GA-EX58-UD4P (F10d)
    CORE I7 920 2.66G AD0
    CORSAIR XMS3 12GB DDR3 1600
    NOCTUA NH-U12P SE1366
    WD WD6401AALS HD x 3
    Sony Optiarc DVD/CD
    GIGABYTE GV-R455D3-512I HD4550
    ANTEC SONATA III 500 BK RT

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD4P + Win 7RC = BSOD

    No, no need to do things in that fashion. Just adjust until things are passing is all you need to to.

    Try to look on the middle left of the BSOD Screens, if you see these codes this is what each means, adjust accordingly >>

    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •